[POWERPC] Fix cache line vs. block size confusion

We had an historical confusion in the kernel between cache line
and cache block size. The former is an implementation detail of
the L1 cache which can be useful for performance optimisations,
the later is the actual size on which the cache control
instructions operate, which can be different.

For some reason, we had a weird hack reading the right property
on powermac and the wrong one on any other 64 bits (32 bits is
unaffected as it only uses the cputable for cache block size
infos at this stage).

This fixes the booting-without-of.txt documentation to mention
the right properties, and fixes the 64 bits initialization code
to look for the block size first, with a fallback to the line
size if the property is missing.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index a96e85397eb792cb10e5e5cc066664846a1b289e..2233e3d5e5f3ddbec48cd2e310dc7e9c5a63d059 100644 (file)
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -851,12 +851,18 @@ address which can extend beyond that limit.
         /cpus/PowerPC,970FX@0
         /cpus/PowerPC,970FX@1
       (unit addresses do not require leading zeroes)
-    - d-cache-line-size : one cell, L1 data cache line size in bytes
-    - i-cache-line-size : one cell, L1 instruction cache line size in
+    - d-cache-block-size : one cell, L1 data cache block size in bytes (*)
+    - i-cache-block-size : one cell, L1 instruction cache block size in
       bytes
     - d-cache-size : one cell, size of L1 data cache in bytes
     - i-cache-size : one cell, size of L1 instruction cache in bytes
 
+(*) The cache "block" size is the size on which the cache management
+instructions operate. Historically, this document used the cache
+"line" size here which is incorrect. The kernel will prefer the cache
+block size and will fallback to cache line size for backward
+compatibility.
+
   Recommended properties:
 
     - timebase-frequency : a cell indicating the frequency of the
@@ -870,6 +876,10 @@ address which can extend beyond that limit.
       for the above, the common code doesn't use that property, but
       you are welcome to re-use the pSeries or Maple one. A future
       kernel version might provide a common function for this.
+    - d-cache-line-size : one cell, L1 data cache line size in bytes
+      if different from the block size
+    - i-cache-line-size : one cell, L1 instruction cache line size in
+      bytes if different from the block size
 
   You are welcome to add any property you find relevant to your board,
   like some information about the mechanism used to soft-reset the

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ede77dbbd4df7fa3338e343973f93a71accb7de5..3b1529c103ef4a545da877bfe4d2de81cf41abe7 100644 (file)
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -291,23 +291,16 @@ static void __init initialize_cache_info(void)
                if ( num_cpus == 1 ) {
                        const u32 *sizep, *lsizep;
                        u32 size, lsize;
-                       const char *dc, *ic;
-
-                       /* Then read cache informations */
-                       if (machine_is(powermac)) {
-                               dc = "d-cache-block-size";
-                               ic = "i-cache-block-size";
-                       } else {
-                               dc = "d-cache-line-size";
-                               ic = "i-cache-line-size";
-                       }
 
                        size = 0;
                        lsize = cur_cpu_spec->dcache_bsize;
                        sizep = of_get_property(np, "d-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
-                       lsizep = of_get_property(np, dc, NULL);
+                       lsizep = of_get_property(np, "d-cache-block-size", NULL);
+                       /* fallback if block size missing */
+                       if (lsizep == NULL)
+                               lsizep = of_get_property(np, "d-cache-line-size", NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)
@@ -324,7 +317,9 @@ static void __init initialize_cache_info(void)
                        sizep = of_get_property(np, "i-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
-                       lsizep = of_get_property(np, ic, NULL);
+                       lsizep = of_get_property(np, "i-cache-block-size", NULL);
+                       if (lsizep == NULL)
+                               lsizep = of_get_property(np, "i-cache-line-size", NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)