]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[TG3]: Add various register methods
authorMichael Chan <mchan@broadcom.com>
Wed, 10 Aug 2005 03:16:46 +0000 (20:16 -0700)
committerDavid S. Miller <davem@sunset.davemloft.net>
Mon, 29 Aug 2005 22:50:15 +0000 (15:50 -0700)
This patch adds various dedicated register read/write methods for the
existing workarounds, including PCIX target workaround, write with read
flush, etc. The chips that require these workarounds will use these
dedicated access functions.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c

index 13283c29f80254db3468a66d543e1219ea943507..80fbb183f7556d32e1c03f76272e5b119db4b5eb 100644 (file)
@@ -340,16 +340,16 @@ static struct {
 
 static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
 {
-       if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
-               spin_lock_bh(&tp->indirect_lock);
-               pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
-               pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
-               spin_unlock_bh(&tp->indirect_lock);
-       } else {
-               writel(val, tp->regs + off);
-               if ((tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) != 0)
-                       readl(tp->regs + off);
-       }
+       spin_lock_bh(&tp->indirect_lock);
+       pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
+       pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
+       spin_unlock_bh(&tp->indirect_lock);
+}
+
+static void tg3_write_flush_reg32(struct tg3 *tp, u32 off, u32 val)
+{
+       writel(val, tp->regs + off);
+       readl(tp->regs + off);
 }
 
 static void _tw32_flush(struct tg3 *tp, u32 off, u32 val)
@@ -366,14 +366,6 @@ static void _tw32_flush(struct tg3 *tp, u32 off, u32 val)
        }
 }
 
-static void tg3_write32_rx_mbox(struct tg3 *tp, u32 off, u32 val)
-{
-       void __iomem *mbox = tp->regs + off;
-       writel(val, mbox);
-       if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
-               readl(mbox);
-}
-
 static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
 {
        void __iomem *mbox = tp->regs + off;
@@ -4222,7 +4214,7 @@ static void tg3_stop_fw(struct tg3 *);
 static int tg3_chip_reset(struct tg3 *tp)
 {
        u32 val;
-       u32 flags_save;
+       void (*write_op)(struct tg3 *, u32, u32);
        int i;
 
        if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
@@ -4234,8 +4226,9 @@ static int tg3_chip_reset(struct tg3 *tp)
         * fun things.  So, temporarily disable the 5701
         * hardware workaround, while we do the reset.
         */
-       flags_save = tp->tg3_flags;
-       tp->tg3_flags &= ~TG3_FLAG_5701_REG_WRITE_BUG;
+       write_op = tp->write32;
+       if (write_op == tg3_write_flush_reg32)
+               tp->write32 = tg3_write32;
 
        /* do the reset */
        val = GRC_MISC_CFG_CORECLK_RESET;
@@ -4254,8 +4247,8 @@ static int tg3_chip_reset(struct tg3 *tp)
                val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
        tw32(GRC_MISC_CFG, val);
 
-       /* restore 5701 hardware bug workaround flag */
-       tp->tg3_flags = flags_save;
+       /* restore 5701 hardware bug workaround write method */
+       tp->write32 = write_op;
 
        /* Unfortunately, we have to delay before the PCI read back.
         * Some 575X chips even will not respond to a PCI cfg access
@@ -4641,7 +4634,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
                                 int cpu_scratch_size, struct fw_info *info)
 {
        int err, i;
-       u32 orig_tg3_flags = tp->tg3_flags;
        void (*write_op)(struct tg3 *, u32, u32);
 
        if (cpu_base == TX_CPU_BASE &&
@@ -4657,11 +4649,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
        else
                write_op = tg3_write_indirect_reg32;
 
-       /* Force use of PCI config space for indirect register
-        * write calls.
-        */
-       tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
-
        /* It is possible that bootcode is still loading at this point.
         * Get the nvram lock first before halting the cpu.
         */
@@ -4697,7 +4684,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
        err = 0;
 
 out:
-       tp->tg3_flags = orig_tg3_flags;
        return err;
 }
 
@@ -9331,11 +9317,25 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
                pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
        }
 
+       /* Default fast path register access methods */
        tp->read32 = tg3_read32;
-       tp->write32 = tg3_write_indirect_reg32;
+       tp->write32 = tg3_write32;
        tp->write32_mbox = tg3_write32;
-       tp->write32_tx_mbox = tg3_write32_tx_mbox;
-       tp->write32_rx_mbox = tg3_write32_rx_mbox;
+       tp->write32_tx_mbox = tg3_write32;
+       tp->write32_rx_mbox = tg3_write32;
+
+       /* Various workaround register access methods */
+       if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
+               tp->write32 = tg3_write_indirect_reg32;
+       else if (tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG)
+               tp->write32 = tg3_write_flush_reg32;
+
+       if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
+           (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+               tp->write32_tx_mbox = tg3_write32_tx_mbox;
+               if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+                       tp->write32_rx_mbox = tg3_write_flush_reg32;
+       }
 
        /* Get eeprom hw config before calling tg3_set_power_state().
         * In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be