#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <asm/io.h>
#include "lm75.h"
-/* The actual ISA address is read from Super-I/O configuration space */
-static unsigned short address;
+enum kinds { w83627ehf, w83627dhg };
-/*
- * Super-I/O constants and functions
- */
+/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
+static const char * w83627ehf_device_names[] = {
+ "w83627ehf",
+ "w83627dhg",
+};
+
+#define DRVNAME "w83627ehf"
/*
- * The three following globals are initialized in w83627ehf_find(), before
- * the i2c-isa device is created. Otherwise, they could be stored in
- * w83627ehf_data. This is ugly, but necessary, and when the driver is next
- * updated to become a platform driver, the globals will disappear.
+ * Super-I/O constants and functions
*/
-static int REG; /* The register to read/write */
-static int VAL; /* The value to read/write */
-/* The w83627ehf/ehg have 10 voltage inputs, but the w83627dhg has 9. This
- * value is also used in w83627ehf_detect() to export a device name in sysfs
- * (e.g. w83627ehf or w83627dhg) */
-static int w83627ehf_num_in;
#define W83627EHF_LD_HWM 0x0b
#define SIO_ID_MASK 0xFFF0
static inline void
-superio_outb(int reg, int val)
+superio_outb(int ioreg, int reg, int val)
{
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg, ioreg);
+ outb(val, ioreg + 1);
}
static inline int
-superio_inb(int reg)
+superio_inb(int ioreg, int reg)
{
- outb(reg, REG);
- return inb(VAL);
+ outb(reg, ioreg);
+ return inb(ioreg + 1);
}
static inline void
-superio_select(int ld)
+superio_select(int ioreg, int ld)
{
- outb(SIO_REG_LDSEL, REG);
- outb(ld, VAL);
+ outb(SIO_REG_LDSEL, ioreg);
+ outb(ld, ioreg + 1);
}
static inline void
-superio_enter(void)
+superio_enter(int ioreg)
{
- outb(0x87, REG);
- outb(0x87, REG);
+ outb(0x87, ioreg);
+ outb(0x87, ioreg);
}
static inline void
-superio_exit(void)
+superio_exit(int ioreg)
{
- outb(0x02, REG);
- outb(0x02, VAL);
+ outb(0x02, ioreg);
+ outb(0x02, ioreg + 1);
}
/*
#define IOREGION_ALIGNMENT ~7
#define IOREGION_OFFSET 5
#define IOREGION_LENGTH 2
-#define ADDR_REG_OFFSET 5
-#define DATA_REG_OFFSET 6
+#define ADDR_REG_OFFSET 0
+#define DATA_REG_OFFSET 1
#define W83627EHF_REG_BANK 0x4E
#define W83627EHF_REG_CONFIG 0x40
*/
struct w83627ehf_data {
- struct i2c_client client;
+ int addr; /* IO base of hw monitor block */
+ const char *name;
+
struct class_device *class_dev;
struct mutex lock;
unsigned long last_updated; /* In jiffies */
/* Register values */
+ u8 in_num; /* number of in inputs we have */
u8 in[10]; /* Register value */
u8 in_max[10]; /* Register value */
u8 in_min[10]; /* Register value */
u8 fan_stop_time[4];
};
+struct w83627ehf_sio_data {
+ int sioreg;
+ enum kinds kind;
+};
+
static inline int is_word_sized(u16 reg)
{
return (((reg & 0xff00) == 0x100
nothing for registers which live in bank 0. For others, they respectively
set the bank register to the correct value (before the register is
accessed), and back to 0 (afterwards). */
-static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg)
+static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
{
if (reg & 0xff00) {
- outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
- outb_p(reg >> 8, client->addr + DATA_REG_OFFSET);
+ outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
+ outb_p(reg >> 8, data->addr + DATA_REG_OFFSET);
}
}
-static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg)
+static inline void w83627ehf_reset_bank(struct w83627ehf_data *data, u16 reg)
{
if (reg & 0xff00) {
- outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET);
- outb_p(0, client->addr + DATA_REG_OFFSET);
+ outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
+ outb_p(0, data->addr + DATA_REG_OFFSET);
}
}
-static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg)
+static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
int res, word_sized = is_word_sized(reg);
mutex_lock(&data->lock);
- w83627ehf_set_bank(client, reg);
- outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
- res = inb_p(client->addr + DATA_REG_OFFSET);
+ w83627ehf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
+ res = inb_p(data->addr + DATA_REG_OFFSET);
if (word_sized) {
outb_p((reg & 0xff) + 1,
- client->addr + ADDR_REG_OFFSET);
- res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET);
+ data->addr + ADDR_REG_OFFSET);
+ res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET);
}
- w83627ehf_reset_bank(client, reg);
+ w83627ehf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return res;
}
-static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value)
+static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
int word_sized = is_word_sized(reg);
mutex_lock(&data->lock);
- w83627ehf_set_bank(client, reg);
- outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET);
+ w83627ehf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
if (word_sized) {
- outb_p(value >> 8, client->addr + DATA_REG_OFFSET);
+ outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
outb_p((reg & 0xff) + 1,
- client->addr + ADDR_REG_OFFSET);
+ data->addr + ADDR_REG_OFFSET);
}
- outb_p(value & 0xff, client->addr + DATA_REG_OFFSET);
- w83627ehf_reset_bank(client, reg);
+ outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
+ w83627ehf_reset_bank(data, reg);
mutex_unlock(&data->lock);
return 0;
}
/* This function assumes that the caller holds data->update_lock */
-static void w83627ehf_write_fan_div(struct i2c_client *client, int nr)
+static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
u8 reg;
switch (nr) {
case 0:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf)
| ((data->fan_div[0] & 0x03) << 4);
/* fan5 input control bit is write only, compute the value */
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf)
| ((data->fan_div[0] & 0x04) << 3);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 1:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f)
| ((data->fan_div[1] & 0x03) << 6);
/* fan5 input control bit is write only, compute the value */
reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf)
| ((data->fan_div[1] & 0x04) << 4);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 2:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f)
| ((data->fan_div[2] & 0x03) << 6);
- w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f)
+ w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f)
| ((data->fan_div[2] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
break;
case 3:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc)
| (data->fan_div[3] & 0x03);
- w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
- reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f)
+ w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f)
| ((data->fan_div[3] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg);
break;
case 4:
- reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73)
+ reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73)
| ((data->fan_div[4] & 0x03) << 2)
| ((data->fan_div[4] & 0x04) << 5);
- w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg);
+ w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
break;
}
}
static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
int pwmcfg = 0, tolerance = 0; /* shut up the compiler */
int i;
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
/* Fan clock dividers */
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
data->fan_div[2] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(client, W83627EHF_REG_VBAT);
+ i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
data->fan_div[0] |= (i >> 3) & 0x04;
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
if (data->has_fan & ((1 << 3) | (1 << 4))) {
- i = w83627ehf_read_value(client, W83627EHF_REG_DIODE);
+ i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
data->fan_div[3] = i & 0x03;
data->fan_div[4] = ((i >> 2) & 0x03)
| ((i >> 5) & 0x04);
}
if (data->has_fan & (1 << 3)) {
- i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT);
+ i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
data->fan_div[3] |= (i >> 5) & 0x04;
}
/* Measured voltages and limits */
- for (i = 0; i < w83627ehf_num_in; i++) {
- data->in[i] = w83627ehf_read_value(client,
+ for (i = 0; i < data->in_num; i++) {
+ data->in[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN(i));
- data->in_min[i] = w83627ehf_read_value(client,
+ data->in_min[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN_MIN(i));
- data->in_max[i] = w83627ehf_read_value(client,
+ data->in_max[i] = w83627ehf_read_value(data,
W83627EHF_REG_IN_MAX(i));
}
if (!(data->has_fan & (1 << i)))
continue;
- data->fan[i] = w83627ehf_read_value(client,
+ data->fan[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN[i]);
- data->fan_min[i] = w83627ehf_read_value(client,
+ data->fan_min[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_MIN[i]);
/* If we failed to measure the fan speed and clock
time */
if (data->fan[i] == 0xff
&& data->fan_div[i] < 0x07) {
- dev_dbg(&client->dev, "Increasing fan%d "
+ dev_dbg(dev, "Increasing fan%d "
"clock divider from %u to %u\n",
i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
- w83627ehf_write_fan_div(client, i);
+ w83627ehf_write_fan_div(data, i);
/* Preserve min limit if possible */
if (data->fan_min[i] >= 2
&& data->fan_min[i] != 255)
- w83627ehf_write_value(client,
+ w83627ehf_write_value(data,
W83627EHF_REG_FAN_MIN[i],
(data->fan_min[i] /= 2));
}
for (i = 0; i < 4; i++) {
/* pwmcfg, tolarance mapped for i=0, i=1 to same reg */
if (i != 1) {
- pwmcfg = w83627ehf_read_value(client,
+ pwmcfg = w83627ehf_read_value(data,
W83627EHF_REG_PWM_ENABLE[i]);
- tolerance = w83627ehf_read_value(client,
+ tolerance = w83627ehf_read_value(data,
W83627EHF_REG_TOLERANCE[i]);
}
data->pwm_mode[i] =
data->pwm_enable[i] =
((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
& 3) + 1;
- data->pwm[i] = w83627ehf_read_value(client,
+ data->pwm[i] = w83627ehf_read_value(data,
W83627EHF_REG_PWM[i]);
- data->fan_min_output[i] = w83627ehf_read_value(client,
+ data->fan_min_output[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_MIN_OUTPUT[i]);
- data->fan_stop_time[i] = w83627ehf_read_value(client,
+ data->fan_stop_time[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_STOP_TIME[i]);
data->target_temp[i] =
- w83627ehf_read_value(client,
+ w83627ehf_read_value(data,
W83627EHF_REG_TARGET[i]) &
(data->pwm_mode[i] == 1 ? 0x7f : 0xff);
data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0))
}
/* Measured temperatures and limits */
- data->temp1 = w83627ehf_read_value(client,
+ data->temp1 = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1);
- data->temp1_max = w83627ehf_read_value(client,
+ data->temp1_max = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1_OVER);
- data->temp1_max_hyst = w83627ehf_read_value(client,
+ data->temp1_max_hyst = w83627ehf_read_value(data,
W83627EHF_REG_TEMP1_HYST);
for (i = 0; i < 2; i++) {
- data->temp[i] = w83627ehf_read_value(client,
+ data->temp[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP[i]);
- data->temp_max[i] = w83627ehf_read_value(client,
+ data->temp_max[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_OVER[i]);
- data->temp_max_hyst[i] = w83627ehf_read_value(client,
+ data->temp_max_hyst[i] = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_HYST[i]);
}
- data->alarms = w83627ehf_read_value(client,
+ data->alarms = w83627ehf_read_value(data,
W83627EHF_REG_ALARM1) |
- (w83627ehf_read_value(client,
+ (w83627ehf_read_value(data,
W83627EHF_REG_ALARM2) << 8) |
- (w83627ehf_read_value(client,
+ (w83627ehf_read_value(data,
W83627EHF_REG_ALARM3) << 16);
data->last_updated = jiffies;
store_in_##reg (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->in_##reg[nr] = in_to_reg(val, nr); \
- w83627ehf_write_value(client, W83627EHF_REG_IN_##REG(nr), \
+ w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
mutex_unlock(&data->update_lock); \
return count; \
store_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
unsigned int val = simple_strtoul(buf, NULL, 10);
nr + 1, div_from_reg(data->fan_div[nr]),
div_from_reg(new_div));
data->fan_div[nr] = new_div;
- w83627ehf_write_fan_div(client, nr);
+ w83627ehf_write_fan_div(data, nr);
}
- w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr],
+ w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[nr],
data->fan_min[nr]);
mutex_unlock(&data->update_lock);
store_temp1_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \
- w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \
+ w83627ehf_write_value(data, W83627EHF_REG_TEMP1_##REG, \
data->temp1_##reg); \
mutex_unlock(&data->update_lock); \
return count; \
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = simple_strtoul(buf, NULL, 10); \
\
mutex_lock(&data->update_lock); \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
- w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \
+ w83627ehf_write_value(data, W83627EHF_REG_TEMP_##REG[nr], \
data->reg[nr]); \
mutex_unlock(&data->update_lock); \
return count; \
store_pwm_mode(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = simple_strtoul(buf, NULL, 10);
if (val > 1)
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
data->pwm_mode[nr] = val;
reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]);
if (!val)
reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr];
- w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
store_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255);
mutex_lock(&data->update_lock);
data->pwm[nr] = val;
- w83627ehf_write_value(client, W83627EHF_REG_PWM[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
store_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u32 val = simple_strtoul(buf, NULL, 10);
if (!val || (val > 2)) /* only modes 1 and 2 are supported */
return -EINVAL;
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_PWM_ENABLE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
data->pwm_enable[nr] = val;
reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
- w83627ehf_write_value(client, W83627EHF_REG_PWM_ENABLE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
store_target_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000);
mutex_lock(&data->update_lock);
data->target_temp[nr] = val;
- w83627ehf_write_value(client, W83627EHF_REG_TARGET[nr], val);
+ w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
mutex_unlock(&data->update_lock);
return count;
}
store_tolerance(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct w83627ehf_data *data = i2c_get_clientdata(client);
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
u16 reg;
u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000);
mutex_lock(&data->update_lock);
- reg = w83627ehf_read_value(client, W83627EHF_REG_TOLERANCE[nr]);
+ reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
data->tolerance[nr] = val;
if (nr == 1)
reg = (reg & 0x0f) | (val << 4);
else
reg = (reg & 0xf0) | val;
- w83627ehf_write_value(client, W83627EHF_REG_TOLERANCE[nr], reg);
+ w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
mutex_unlock(&data->update_lock);
return count;
}
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{\
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
}
store_##reg(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct w83627ehf_data *data = i2c_get_clientdata(client); \
+ struct w83627ehf_data *data = dev_get_drvdata(dev); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \
data->pwm_mode[nr]); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(client, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
} \
fan_time_functions(fan_stop_time, FAN_STOP_TIME)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
};
/*
- * Driver and client management
+ * Driver and device management
*/
static void w83627ehf_device_remove_files(struct device *dev)
/* some entries in the following arrays may not have been used in
* device_create_file(), but device_remove_file() will ignore them */
int i;
+ struct w83627ehf_data *data = dev_get_drvdata(dev);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
- for (i = 0; i < w83627ehf_num_in; i++) {
+ for (i = 0; i < data->in_num; i++) {
device_remove_file(dev, &sda_in_input[i].dev_attr);
device_remove_file(dev, &sda_in_alarm[i].dev_attr);
device_remove_file(dev, &sda_in_min[i].dev_attr);
}
for (i = 0; i < ARRAY_SIZE(sda_temp); i++)
device_remove_file(dev, &sda_temp[i].dev_attr);
-}
-static struct i2c_driver w83627ehf_driver;
+ device_remove_file(dev, &dev_attr_name);
+}
-static void w83627ehf_init_client(struct i2c_client *client)
+/* Get the monitoring functions started */
+static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
{
int i;
u8 tmp;
/* Start monitoring is needed */
- tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG);
+ tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG);
if (!(tmp & 0x01))
- w83627ehf_write_value(client, W83627EHF_REG_CONFIG,
+ w83627ehf_write_value(data, W83627EHF_REG_CONFIG,
tmp | 0x01);
/* Enable temp2 and temp3 if needed */
for (i = 0; i < 2; i++) {
- tmp = w83627ehf_read_value(client,
+ tmp = w83627ehf_read_value(data,
W83627EHF_REG_TEMP_CONFIG[i]);
if (tmp & 0x01)
- w83627ehf_write_value(client,
+ w83627ehf_write_value(data,
W83627EHF_REG_TEMP_CONFIG[i],
tmp & 0xfe);
}
}
-static int w83627ehf_detect(struct i2c_adapter *adapter)
+static int __devinit w83627ehf_probe(struct platform_device *pdev)
{
- struct i2c_client *client;
+ struct device *dev = &pdev->dev;
+ struct w83627ehf_sio_data *sio_data = dev->platform_data;
struct w83627ehf_data *data;
- struct device *dev;
+ struct resource *res;
u8 fan4pin, fan5pin;
int i, err = 0;
- if (!request_region(address + IOREGION_OFFSET, IOREGION_LENGTH,
- w83627ehf_driver.driver.name)) {
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) {
err = -EBUSY;
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)res->start + IOREGION_LENGTH - 1);
goto exit;
}
goto exit_release;
}
- client = &data->client;
- i2c_set_clientdata(client, data);
- client->addr = address;
+ data->addr = res->start;
mutex_init(&data->lock);
- client->adapter = adapter;
- client->driver = &w83627ehf_driver;
- client->flags = 0;
- dev = &client->dev;
-
- if (w83627ehf_num_in == 9)
- strlcpy(client->name, "w83627dhg", I2C_NAME_SIZE);
- else /* just say ehf. 627EHG is 627EHF in lead-free packaging. */
- strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE);
-
- data->valid = 0;
mutex_init(&data->update_lock);
+ data->name = w83627ehf_device_names[sio_data->kind];
+ platform_set_drvdata(pdev, data);
- /* Tell the i2c layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
- goto exit_free;
+ /* 627EHG and 627EHF have 10 voltage inputs; DHG has 9 */
+ data->in_num = (sio_data->kind == w83627dhg) ? 9 : 10;
/* Initialize the chip */
- w83627ehf_init_client(client);
+ w83627ehf_init_device(data);
/* A few vars need to be filled upon startup */
for (i = 0; i < 5; i++)
- data->fan_min[i] = w83627ehf_read_value(client,
+ data->fan_min[i] = w83627ehf_read_value(data,
W83627EHF_REG_FAN_MIN[i]);
/* fan4 and fan5 share some pins with the GPIO and serial flash */
- superio_enter();
- fan5pin = superio_inb(0x24) & 0x2;
- fan4pin = superio_inb(0x29) & 0x6;
- superio_exit();
+ superio_enter(sio_data->sioreg);
+ fan5pin = superio_inb(sio_data->sioreg, 0x24) & 0x2;
+ fan4pin = superio_inb(sio_data->sioreg, 0x29) & 0x6;
+ superio_exit(sio_data->sioreg);
/* It looks like fan4 and fan5 pins can be alternatively used
as fan on/off switches, but fan5 control is write only :/
is not the default. */
data->has_fan = 0x07; /* fan1, fan2 and fan3 */
- i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1);
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
if ((i & (1 << 2)) && (!fan4pin))
data->has_fan |= (1 << 3);
if (!(i & (1 << 1)) && (!fan5pin))
goto exit_remove;
}
- for (i = 0; i < w83627ehf_num_in; i++)
+ for (i = 0; i < data->in_num; i++)
if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
|| (err = device_create_file(dev,
&sda_in_alarm[i].dev_attr))
if ((err = device_create_file(dev, &sda_temp[i].dev_attr)))
goto exit_remove;
+ err = device_create_file(dev, &dev_attr_name);
+ if (err)
+ goto exit_remove;
+
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
exit_remove:
w83627ehf_device_remove_files(dev);
- i2c_detach_client(client);
-exit_free:
kfree(data);
+ platform_set_drvdata(pdev, NULL);
exit_release:
- release_region(address + IOREGION_OFFSET, IOREGION_LENGTH);
+ release_region(res->start, IOREGION_LENGTH);
exit:
return err;
}
-static int w83627ehf_detach_client(struct i2c_client *client)
+static int __devexit w83627ehf_remove(struct platform_device *pdev)
{
- struct w83627ehf_data *data = i2c_get_clientdata(client);
- int err;
+ struct w83627ehf_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->class_dev);
- w83627ehf_device_remove_files(&client->dev);
-
- if ((err = i2c_detach_client(client)))
- return err;
- release_region(client->addr + IOREGION_OFFSET, IOREGION_LENGTH);
+ w83627ehf_device_remove_files(&pdev->dev);
+ release_region(data->addr, IOREGION_LENGTH);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
-static struct i2c_driver w83627ehf_driver = {
+static struct platform_driver w83627ehf_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "w83627ehf",
+ .name = DRVNAME,
},
- .attach_adapter = w83627ehf_detect,
- .detach_client = w83627ehf_detach_client,
+ .probe = w83627ehf_probe,
+ .remove = __devexit_p(w83627ehf_remove),
};
-static int __init w83627ehf_find(int sioaddr, unsigned short *addr)
+/* w83627ehf_find() looks for a '627 in the Super-I/O config space */
+static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
+ struct w83627ehf_sio_data *sio_data)
{
+ static const char __initdata sio_name_W83627EHF[] = "W83627EHF";
+ static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
+ static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
+
u16 val;
+ const char *sio_name;
- REG = sioaddr;
- VAL = sioaddr + 1;
- superio_enter();
+ superio_enter(sioaddr);
- val = (superio_inb(SIO_REG_DEVID) << 8)
- | superio_inb(SIO_REG_DEVID + 1);
+ val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8)
+ | superio_inb(sioaddr, SIO_REG_DEVID + 1);
switch (val & SIO_ID_MASK) {
- case SIO_W83627DHG_ID:
- w83627ehf_num_in = 9;
- break;
case SIO_W83627EHF_ID:
+ sio_data->kind = w83627ehf;
+ sio_name = sio_name_W83627EHF;
+ break;
case SIO_W83627EHG_ID:
- w83627ehf_num_in = 10;
+ sio_data->kind = w83627ehf;
+ sio_name = sio_name_W83627EHG;
+ break;
+ case SIO_W83627DHG_ID:
+ sio_data->kind = w83627dhg;
+ sio_name = sio_name_W83627DHG;
break;
default:
- printk(KERN_WARNING "w83627ehf: unsupported chip ID: 0x%04x\n",
+ pr_info(DRVNAME ": unsupported chip ID: 0x%04x\n",
val);
- superio_exit();
+ superio_exit(sioaddr);
return -ENODEV;
}
- superio_select(W83627EHF_LD_HWM);
- val = (superio_inb(SIO_REG_ADDR) << 8)
- | superio_inb(SIO_REG_ADDR + 1);
+ /* We have a known chip, find the HWM I/O address */
+ superio_select(sioaddr, W83627EHF_LD_HWM);
+ val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8)
+ | superio_inb(sioaddr, SIO_REG_ADDR + 1);
*addr = val & IOREGION_ALIGNMENT;
if (*addr == 0) {
- superio_exit();
+ superio_exit(sioaddr);
return -ENODEV;
}
/* Activate logical device if needed */
- val = superio_inb(SIO_REG_ENABLE);
+ val = superio_inb(sioaddr, SIO_REG_ENABLE);
if (!(val & 0x01))
- superio_outb(SIO_REG_ENABLE, val | 0x01);
+ superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
+
+ superio_exit(sioaddr);
+ pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr);
+ sio_data->sioreg = sioaddr;
- superio_exit();
return 0;
}
+/* when Super-I/O functions move to a separate file, the Super-I/O
+ * bus will manage the lifetime of the device and this module will only keep
+ * track of the w83627ehf driver. But since we platform_device_alloc(), we
+ * must keep track of the device */
+static struct platform_device *pdev;
+
static int __init sensors_w83627ehf_init(void)
{
- if (w83627ehf_find(0x2e, &address)
- && w83627ehf_find(0x4e, &address))
+ int err;
+ unsigned short address;
+ struct resource res;
+ struct w83627ehf_sio_data sio_data;
+
+ /* initialize sio_data->kind and sio_data->sioreg.
+ *
+ * when Super-I/O functions move to a separate file, the Super-I/O
+ * driver will probe 0x2e and 0x4e and auto-detect the presence of a
+ * w83627ehf hardware monitor, and call probe() */
+ if (w83627ehf_find(0x2e, &address, &sio_data) &&
+ w83627ehf_find(0x4e, &address, &sio_data))
return -ENODEV;
- return i2c_isa_add_driver(&w83627ehf_driver);
+ err = platform_driver_register(&w83627ehf_driver);
+ if (err)
+ goto exit;
+
+ if (!(pdev = platform_device_alloc(DRVNAME, address))) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit_unregister;
+ }
+
+ err = platform_device_add_data(pdev, &sio_data,
+ sizeof(struct w83627ehf_sio_data));
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ memset(&res, 0, sizeof(res));
+ res.name = DRVNAME;
+ res.start = address + IOREGION_OFFSET;
+ res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
+ res.flags = IORESOURCE_IO;
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ /* platform_device_add calls probe() */
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit_unregister:
+ platform_driver_unregister(&w83627ehf_driver);
+exit:
+ return err;
}
static void __exit sensors_w83627ehf_exit(void)
{
- i2c_isa_del_driver(&w83627ehf_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&w83627ehf_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
projects / linux-2.6-omap-h63xx.git / commitdiff