fs/Kconfig: move fat out

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

diff --git a/fs/Kconfig b/fs/Kconfig
index b4868b8fd99913a66a080883f0229493411b62e0..fdb2c351b4a76761f990b81b9cc704792c1b7f26 100644 (file)
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -132,103 +132,7 @@ endif # BLOCK
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-       tristate
-       select NLS
-       help
-         If you want to use one of the FAT-based file systems (the MS-DOS and
-         VFAT (Windows 95) file systems), then you must say Y or M here
-         to include FAT support. You will then be able to mount partitions or
-         diskettes with FAT-based file systems and transparently access the
-         files on them, i.e. MSDOS files will look and behave just like all
-         other Unix files.
-
-         This FAT support is not a file system in itself, it only provides
-         the foundation for the other file systems. You will have to say Y or
-         M to at least one of "MSDOS fs support" or "VFAT fs support" in
-         order to make use of it.
-
-         Another way to read and write MSDOS floppies and hard drive
-         partitions from within Linux (but not transparently) is with the
-         mtools ("man mtools") program suite. You don't need to say Y here in
-         order to do that.
-
-         If you need to move large files on floppies between a DOS and a
-         Linux box, say Y here, mount the floppy under Linux with an MSDOS
-         file system and use GNU tar's M option. GNU tar is a program
-         available for Unix and DOS ("man tar" or "info tar").
-
-         The FAT support will enlarge your kernel by about 37 KB. If unsure,
-         say Y.
-
-         To compile this as a module, choose M here: the module will be called
-         fat.  Note that if you compile the FAT support as a module, you
-         cannot compile any of the FAT-based file systems into the kernel
-         -- they will have to be modules as well.
-
-config MSDOS_FS
-       tristate "MSDOS fs support"
-       select FAT_FS
-       help
-         This allows you to mount MSDOS partitions of your hard drive (unless
-         they are compressed; to access compressed MSDOS partitions under
-         Linux, you can either use the DOS emulator DOSEMU, described in the
-         DOSEMU-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-         <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-         intend to use dosemu with a non-compressed MSDOS partition, say Y
-         here) and MSDOS floppies. This means that file access becomes
-         transparent, i.e. the MSDOS files look and behave just like all
-         other Unix files.
-
-         If you have Windows 95 or Windows NT installed on your MSDOS
-         partitions, you should use the VFAT file system (say Y to "VFAT fs
-         support" below), or you will not be able to see the long filenames
-         generated by Windows 95 / Windows NT.
-
-         This option will enlarge your kernel by about 7 KB. If unsure,
-         answer Y. This will only work if you said Y to "DOS FAT fs support"
-         as well. To compile this as a module, choose M here: the module will
-         be called msdos.
-
-config VFAT_FS
-       tristate "VFAT (Windows-95) fs support"
-       select FAT_FS
-       help
-         This option provides support for normal Windows file systems with
-         long filenames.  That includes non-compressed FAT-based file systems
-         used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-         programs from the mtools package.
-
-         The VFAT support enlarges your kernel by about 10 KB and it only
-         works if you said Y to the "DOS FAT fs support" above.  Please read
-         the file <file:Documentation/filesystems/vfat.txt> for details.  If
-         unsure, say Y.
-
-         To compile this as a module, choose M here: the module will be called
-         vfat.
-
-config FAT_DEFAULT_CODEPAGE
-       int "Default codepage for FAT"
-       depends on MSDOS_FS || VFAT_FS
-       default 437
-       help
-         This option should be set to the codepage of your FAT filesystems.
-         It can be overridden with the "codepage" mount option.
-         See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-       string "Default iocharset for FAT"
-       depends on VFAT_FS
-       default "iso8859-1"
-       help
-         Set this to the default input/output character set you'd
-         like FAT to use. It should probably match the character set
-         that most of your FAT filesystems use, and can be overridden
-         with the "iocharset" mount option for FAT filesystems.
-         Note that "utf8" is not recommended for FAT filesystems.
-         If unsure, you shouldn't set "utf8" here.
-         See <file:Documentation/filesystems/vfat.txt> for more information.
+source "fs/fat/Kconfig"
 
 config NTFS_FS
        tristate "NTFS file system support"

diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
new file mode 100644 (file)
index 0000000..d0a69ff
--- /dev/null
+++ b/fs/fat/Kconfig
@@ -0,0 +1,97 @@
+config FAT_FS
+       tristate
+       select NLS
+       help
+         If you want to use one of the FAT-based file systems (the MS-DOS and
+         VFAT (Windows 95) file systems), then you must say Y or M here
+         to include FAT support. You will then be able to mount partitions or
+         diskettes with FAT-based file systems and transparently access the
+         files on them, i.e. MSDOS files will look and behave just like all
+         other Unix files.
+
+         This FAT support is not a file system in itself, it only provides
+         the foundation for the other file systems. You will have to say Y or
+         M to at least one of "MSDOS fs support" or "VFAT fs support" in
+         order to make use of it.
+
+         Another way to read and write MSDOS floppies and hard drive
+         partitions from within Linux (but not transparently) is with the
+         mtools ("man mtools") program suite. You don't need to say Y here in
+         order to do that.
+
+         If you need to move large files on floppies between a DOS and a
+         Linux box, say Y here, mount the floppy under Linux with an MSDOS
+         file system and use GNU tar's M option. GNU tar is a program
+         available for Unix and DOS ("man tar" or "info tar").
+
+         The FAT support will enlarge your kernel by about 37 KB. If unsure,
+         say Y.
+
+         To compile this as a module, choose M here: the module will be called
+         fat.  Note that if you compile the FAT support as a module, you
+         cannot compile any of the FAT-based file systems into the kernel
+         -- they will have to be modules as well.
+
+config MSDOS_FS
+       tristate "MSDOS fs support"
+       select FAT_FS
+       help
+         This allows you to mount MSDOS partitions of your hard drive (unless
+         they are compressed; to access compressed MSDOS partitions under
+         Linux, you can either use the DOS emulator DOSEMU, described in the
+         DOSEMU-HOWTO, available from
+         <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+         <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+         intend to use dosemu with a non-compressed MSDOS partition, say Y
+         here) and MSDOS floppies. This means that file access becomes
+         transparent, i.e. the MSDOS files look and behave just like all
+         other Unix files.
+
+         If you have Windows 95 or Windows NT installed on your MSDOS
+         partitions, you should use the VFAT file system (say Y to "VFAT fs
+         support" below), or you will not be able to see the long filenames
+         generated by Windows 95 / Windows NT.
+
+         This option will enlarge your kernel by about 7 KB. If unsure,
+         answer Y. This will only work if you said Y to "DOS FAT fs support"
+         as well. To compile this as a module, choose M here: the module will
+         be called msdos.
+
+config VFAT_FS
+       tristate "VFAT (Windows-95) fs support"
+       select FAT_FS
+       help
+         This option provides support for normal Windows file systems with
+         long filenames.  That includes non-compressed FAT-based file systems
+         used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+         programs from the mtools package.
+
+         The VFAT support enlarges your kernel by about 10 KB and it only
+         works if you said Y to the "DOS FAT fs support" above.  Please read
+         the file <file:Documentation/filesystems/vfat.txt> for details.  If
+         unsure, say Y.
+
+         To compile this as a module, choose M here: the module will be called
+         vfat.
+
+config FAT_DEFAULT_CODEPAGE
+       int "Default codepage for FAT"
+       depends on MSDOS_FS || VFAT_FS
+       default 437
+       help
+         This option should be set to the codepage of your FAT filesystems.
+         It can be overridden with the "codepage" mount option.
+         See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+       string "Default iocharset for FAT"
+       depends on VFAT_FS
+       default "iso8859-1"
+       help
+         Set this to the default input/output character set you'd
+         like FAT to use. It should probably match the character set
+         that most of your FAT filesystems use, and can be overridden
+         with the "iocharset" mount option for FAT filesystems.
+         Note that "utf8" is not recommended for FAT filesystems.
+         If unsure, you shouldn't set "utf8" here.
+         See <file:Documentation/filesystems/vfat.txt> for more information.