[ARM] 4648/1: i.MX/MX1 ensure more complete AITC initialization

The AITC code did not allow to start kernel, if bootloader
manipulates with interrupt level mask. The change ensures,
that NIMASK is initialized into correct state and that
interrupts enable registers are cleared.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index 0791b56caeccf827b8405426f23506b9327fce25..a7465db8489373a54bc785a4d0a72a809698c327 100644 (file)
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -43,12 +43,46 @@
  *
  */
 
-#define INTENNUM_OFF              0x8
-#define INTDISNUM_OFF             0xC
+#define INTCNTL_OFF               0x00
+#define NIMASK_OFF                0x04
+#define INTENNUM_OFF              0x08
+#define INTDISNUM_OFF             0x0C
+#define INTENABLEH_OFF            0x10
+#define INTENABLEL_OFF            0x14
+#define INTTYPEH_OFF              0x18
+#define INTTYPEL_OFF              0x1C
+#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
+#define NIVECSR_OFF               0x40
+#define FIVECSR_OFF               0x44
+#define INTSRCH_OFF               0x48
+#define INTSRCL_OFF               0x4C
+#define INTFRCH_OFF               0x50
+#define INTFRCL_OFF               0x54
+#define NIPNDH_OFF                0x58
+#define NIPNDL_OFF                0x5C
+#define FIPNDH_OFF                0x60
+#define FIPNDL_OFF                0x64
 
 #define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
+#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
 #define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
+#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
+#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
+#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
+#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
+#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
+#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
+#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
+#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
+#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
+#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
+#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
+#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
+#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
+#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
+#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
+#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
 
 #if 0
 #define DEBUG_IRQ(fmt...)      printk(fmt)
@@ -222,7 +256,12 @@ imx_init_irq(void)
 
        DEBUG_IRQ("Initializing imx interrupts\n");
 
-       /* Mask all interrupts initially */
+       /* Disable all interrupts initially. */
+       /* Do not rely on the bootloader. */
+       __raw_writel(0, IMX_AITC_INTENABLEH);
+       __raw_writel(0, IMX_AITC_INTENABLEL);
+
+       /* Mask all GPIO interrupts as well */
        IMR(0) = 0;
        IMR(1) = 0;
        IMR(2) = 0;
@@ -245,6 +284,6 @@ imx_init_irq(void)
        set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
        set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
 
-       /* Disable all interrupts initially. */
-       /* In IMX this is done in the bootloader. */
+       /* Release masking of interrupts according to priority */
+       __raw_writel(-1, IMX_AITC_NIMASK);
 }