]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
bnx2x: Not dropping packets with L3/L4 checksum error
authorEilon Greenstein <eilong@broadcom.com>
Wed, 13 Aug 2008 22:48:29 +0000 (15:48 -0700)
committerDavid S. Miller <davem@davemloft.net>
Wed, 13 Aug 2008 23:01:14 +0000 (16:01 -0700)
Not dropping packets with L3/L4 checksum error
Those packets should be passed to the OS. The problem is clear in
forwarding mode.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2x.h
drivers/net/bnx2x_main.c

index 4bf4f7b205f24a62d3ed8fefcbc7cbdb443cc197..dc54602494fb1926726d5e40aacef5e342801e30 100644 (file)
@@ -386,20 +386,28 @@ struct bnx2x_fastpath {
 #define TPA_TYPE(cqe_fp_flags)         ((cqe_fp_flags) & \
                                         (TPA_TYPE_START | TPA_TYPE_END))
 
-#define BNX2X_RX_SUM_OK(cqe) \
-                       (!(cqe->fast_path_cqe.status_flags & \
-                        (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | \
-                         ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)))
+#define ETH_RX_ERROR_FALGS             ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG
+
+#define BNX2X_IP_CSUM_ERR(cqe) \
+                       (!((cqe)->fast_path_cqe.status_flags & \
+                          ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG) && \
+                        ((cqe)->fast_path_cqe.type_error_flags & \
+                         ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG))
+
+#define BNX2X_L4_CSUM_ERR(cqe) \
+                       (!((cqe)->fast_path_cqe.status_flags & \
+                          ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) && \
+                        ((cqe)->fast_path_cqe.type_error_flags & \
+                         ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG))
+
+#define BNX2X_RX_CSUM_OK(cqe) \
+                       (!(BNX2X_L4_CSUM_ERR(cqe) || BNX2X_IP_CSUM_ERR(cqe)))
 
 #define BNX2X_RX_SUM_FIX(cqe) \
                        ((le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) & \
                          PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == \
                         (1 << PARSING_FLAGS_OVER_ETHERNET_PROTOCOL_SHIFT))
 
-#define ETH_RX_ERROR_FALGS     (ETH_FAST_PATH_RX_CQE_PHY_DECODE_ERR_FLG | \
-                                ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | \
-                                ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG)
-
 
 #define FP_USB_FUNC_OFF                        (2 + 2*HC_USTORM_SB_NUM_INDICES)
 #define FP_CSB_FUNC_OFF                        (2 + 2*HC_CSTORM_SB_NUM_INDICES)
index 9eb8a3e6d629c1197e1a788b2cded5b8de3d0a79..b9d376d972ca4855a1194688f883e4b548ca5b6d 100644 (file)
@@ -1501,7 +1501,6 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
                        /* is this an error packet? */
                        if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
-                       /* do we sometimes forward error packets anyway? */
                                DP(NETIF_MSG_RX_ERR,
                                   "ERROR  flags %x  rx packet %u\n",
                                   cqe_fp_flags, sw_comp_cons);
@@ -1557,10 +1556,10 @@ reuse_rx:
                        skb->protocol = eth_type_trans(skb, bp->dev);
 
                        skb->ip_summed = CHECKSUM_NONE;
-                       if (bp->rx_csum && BNX2X_RX_SUM_OK(cqe))
-                               skb->ip_summed = CHECKSUM_UNNECESSARY;
+                       if (bp->rx_csum)
+                               if (likely(BNX2X_RX_CSUM_OK(cqe)))
+                                       skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-                       /* TBD do we pass bad csum packets in promisc */
                }
 
 #ifdef BCM_VLAN