return;
}
-static struct ieee80211_rate *iwl_get_lowest_rate(struct ieee80211_local
- *local)
-{
- struct ieee80211_hw_mode *mode = local->oper_hw_mode;
- int i;
-
- for (i = 0; i < mode->num_rates; i++) {
- struct ieee80211_rate *rate = &mode->rates[i];
-
- if (rate->flags & IEEE80211_RATE_SUPPORTED)
- return rate;
- }
-
- return &mode->rates[0];
-}
-
static u16 iwl_get_adjacent_rate(struct iwl_rate_scale_priv *rs_priv,
u8 index, u16 rate_mask, int phymode)
{
* rate table and must reference the driver allocated rate table
*
*/
-static struct ieee80211_rate *rs_get_rate(void *priv_rate,
- struct net_device *dev,
- struct sk_buff *skb,
- struct rate_control_extra *extra)
+static void rs_get_rate(void *priv_rate, struct net_device *dev,
+ struct ieee80211_hw_mode *mode, struct sk_buff *skb,
+ struct rate_selection *sel)
{
u8 low = IWL_RATE_INVALID;
u8 high = IWL_RATE_INVALID;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct sta_info *sta;
- u16 fc, rate_mask;
+ u16 rate_mask;
struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
DECLARE_MAC_BUF(mac);
IWL_DEBUG_RATE("enter\n");
- memset(extra, 0, sizeof(*extra));
-
- fc = le16_to_cpu(hdr->frame_control);
- if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
- (is_multicast_ether_addr(hdr->addr1))) {
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
- /* TODO: this could probably be improved.. */
- IWL_DEBUG_RATE("leave: lowest rate (not data or is "
- "multicast)\n");
-
- return iwl_get_lowest_rate(local);
- }
-
sta = sta_info_get(local, hdr->addr1);
if (!sta || !sta->rate_ctrl_priv) {
IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
+ sel->rate = rate_lowest(local, local->oper_hw_mode, sta);
if (sta)
sta_info_put(sta);
- return NULL;
+ return;
}
rate_mask = sta->supp_rates;
IWL_DEBUG_RATE("leave: %d\n", index);
- return &priv->ieee_rates[index];
+ sel->rate = &priv->ieee_rates[index];
}
static struct rate_control_ops rs_ops = {
return;
}
-static struct ieee80211_rate *rs_get_lowest_rate(struct ieee80211_local
- *local)
-{
- struct ieee80211_hw_mode *mode = local->oper_hw_mode;
- int i;
-
- for (i = 0; i < mode->num_rates; i++) {
- struct ieee80211_rate *rate = &mode->rates[i];
-
- if (rate->flags & IEEE80211_RATE_SUPPORTED)
- return rate;
- }
-
- return &mode->rates[0];
-}
-
-static struct ieee80211_rate *rs_get_rate(void *priv_rate,
- struct net_device *dev,
- struct sk_buff *skb,
- struct rate_control_extra
- *extra)
+static void rs_get_rate(void *priv_rate, struct net_device *dev,
+ struct ieee80211_hw_mode *mode, struct sk_buff *skb,
+ struct rate_selection *sel)
{
int i;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct sta_info *sta;
- u16 fc;
struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
struct iwl_rate_scale_priv *lq;
IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
- memset(extra, 0, sizeof(*extra));
-
- fc = le16_to_cpu(hdr->frame_control);
- if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
- /* TODO: this could probably be improved.. */
- return rs_get_lowest_rate(local);
- }
-
sta = sta_info_get(local, hdr->addr1);
if (!sta || !sta->rate_ctrl_priv) {
+ sel->rate = rate_lowest(local, local->oper_hw_mode, sta);
if (sta)
sta_info_put(sta);
- return rs_get_lowest_rate(local);
+ return;
}
lq = (struct iwl_rate_scale_priv *)sta->rate_ctrl_priv;
}
done:
+ if ((i < 0) || (i > IWL_RATE_COUNT)) {
+ sel->rate = rate_lowest(local, local->oper_hw_mode, sta);
+ return;
+ }
sta_info_put(sta);
- if ((i < 0) || (i > IWL_RATE_COUNT))
- return rs_get_lowest_rate(local);
- return &priv->ieee_rates[i];
+ sel->rate = &priv->ieee_rates[i];
}
static void *rs_alloc_sta(void *priv, gfp_t gfp)
sta_info_put(sta);
return;
}
- } else {
- /* FIXME: STUPID to call this with both local and local->mdev */
- rate_control_tx_status(local, local->mdev, skb, status);
- }
+ } else
+ rate_control_tx_status(local->mdev, skb, status);
ieee80211_led_tx(local, 0);
kfree(ctrl_ref);
}
+void rate_control_get_rate(struct net_device *dev,
+ struct ieee80211_hw_mode *mode, struct sk_buff *skb,
+ struct rate_selection *sel)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct rate_control_ref *ref = local->rate_ctrl;
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+ struct sta_info *sta = sta_info_get(local, hdr->addr1);
+ int i;
+ u16 fc;
+
+ memset(sel, 0, sizeof(struct rate_selection));
+
+ /* Send management frames and broadcast/multicast data using lowest
+ * rate. */
+ fc = le16_to_cpu(hdr->frame_control);
+ if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
+ is_multicast_ether_addr(hdr->addr1))
+ sel->rate = rate_lowest(local, mode, sta);
+
+ /* If a forced rate is in effect, select it. */
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
+ sel->rate = &mode->rates[sdata->bss->force_unicast_rateidx];
+
+ /* If we haven't found the rate yet, ask the rate control algo. */
+ if (!sel->rate)
+ ref->ops->get_rate(ref->priv, dev, mode, skb, sel);
+
+ /* Select a non-ERP backup rate. */
+ if (!sel->nonerp) {
+ for (i = 0; i < mode->num_rates - 1; i++) {
+ struct ieee80211_rate *rate = &mode->rates[i];
+ if (sel->rate->rate < rate->rate)
+ break;
+
+ if (rate_supported(sta, mode, i) &&
+ !(rate->flags & IEEE80211_RATE_ERP))
+ sel->nonerp = rate;
+ }
+ }
+
+ if (sta)
+ sta_info_put(sta);
+}
+
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref)
{
kref_get(&ref->kref);
#include "ieee80211_i.h"
#include "sta_info.h"
-#define RATE_CONTROL_NUM_DOWN 20
-#define RATE_CONTROL_NUM_UP 15
-
-
-struct rate_control_extra {
- /* values from rate_control_get_rate() to the caller: */
- struct ieee80211_rate *probe; /* probe with this rate, or NULL for no
- * probing */
+struct rate_selection {
+ /* Selected transmission rate */
+ struct ieee80211_rate *rate;
+ /* Non-ERP rate to use if mac80211 decides it cannot use an ERP rate */
struct ieee80211_rate *nonerp;
-
- /* parameters from the caller to rate_control_get_rate(): */
- struct ieee80211_hw_mode *mode;
- u16 ethertype;
+ /* probe with this rate, or NULL for no probing */
+ struct ieee80211_rate *probe;
};
-
struct rate_control_ops {
struct module *module;
const char *name;
void (*tx_status)(void *priv, struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status);
- struct ieee80211_rate *(*get_rate)(void *priv, struct net_device *dev,
- struct sk_buff *skb,
- struct rate_control_extra *extra);
+ void (*get_rate)(void *priv, struct net_device *dev,
+ struct ieee80211_hw_mode *mode, struct sk_buff *skb,
+ struct rate_selection *sel);
void (*rate_init)(void *priv, void *priv_sta,
struct ieee80211_local *local, struct sta_info *sta);
void (*clear)(void *priv);
* first available algorithm. */
struct rate_control_ref *rate_control_alloc(const char *name,
struct ieee80211_local *local);
+void rate_control_get_rate(struct net_device *dev,
+ struct ieee80211_hw_mode *mode, struct sk_buff *skb,
+ struct rate_selection *sel);
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
void rate_control_put(struct rate_control_ref *ref);
-static inline void rate_control_tx_status(struct ieee80211_local *local,
- struct net_device *dev,
+static inline void rate_control_tx_status(struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct rate_control_ref *ref = local->rate_ctrl;
- ref->ops->tx_status(ref->priv, dev, skb, status);
-}
-
-static inline struct ieee80211_rate *
-rate_control_get_rate(struct ieee80211_local *local, struct net_device *dev,
- struct sk_buff *skb, struct rate_control_extra *extra)
-{
- struct rate_control_ref *ref = local->rate_ctrl;
- return ref->ops->get_rate(ref->priv, dev, skb, extra);
+ ref->ops->tx_status(ref->priv, dev, skb, status);
}
#endif
}
+static inline int
+rate_supported(struct sta_info *sta, struct ieee80211_hw_mode *mode, int index)
+{
+ return (sta == NULL || sta->supp_rates & BIT(index)) &&
+ (mode->rates[index].flags & IEEE80211_RATE_SUPPORTED);
+}
+
+static inline int
+rate_lowest_index(struct ieee80211_local *local, struct ieee80211_hw_mode *mode,
+ struct sta_info *sta)
+{
+ int i;
+
+ for (i = 0; i < mode->num_rates; i++) {
+ if (rate_supported(sta, mode, i))
+ return i;
+ }
+
+ /* warn when we cannot find a rate. */
+ WARN_ON(1);
+
+ return 0;
+}
+
+static inline struct ieee80211_rate *
+rate_lowest(struct ieee80211_local *local, struct ieee80211_hw_mode *mode,
+ struct sta_info *sta)
+{
+ return &mode->rates[rate_lowest_index(local, mode, sta)];
+}
+
/* functions for rate control related to a device */
int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
struct ieee80211_tx_control control;
- struct ieee80211_rate *rate;
struct ieee80211_hw_mode *mode;
- struct rate_control_extra extra;
+ struct rate_selection ratesel;
u8 *pos;
struct ieee80211_sub_if_data *sdata;
}
memset(&control, 0, sizeof(control));
- memset(&extra, 0, sizeof(extra));
- extra.mode = local->oper_hw_mode;
- rate = rate_control_get_rate(local, dev, skb, &extra);
- if (!rate) {
+ rate_control_get_rate(dev, local->oper_hw_mode, skb, &ratesel);
+ if (!ratesel.rate) {
printk(KERN_DEBUG "%s: Failed to determine TX rate "
"for IBSS beacon\n", dev->name);
break;
}
control.tx_rate =
((sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) &&
- (rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
- rate->val2 : rate->val;
+ (ratesel.rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
+ ratesel.rate->val2 : ratesel.rate->val;
control.antenna_sel_tx = local->hw.conf.antenna_sel_tx;
control.power_level = local->hw.conf.power_level;
control.flags |= IEEE80211_TXCTL_NO_ACK;
/* This is a minimal implementation of TX rate controlling that can be used
* as the default when no improved mechanisms are available. */
+#define RATE_CONTROL_NUM_DOWN 20
+#define RATE_CONTROL_NUM_UP 15
#define RATE_CONTROL_EMERG_DEC 2
#define RATE_CONTROL_INTERVAL (HZ / 20)
}
}
-
-static struct ieee80211_rate *
-rate_control_lowest_rate(struct ieee80211_local *local,
- struct ieee80211_hw_mode *mode)
-{
- int i;
-
- for (i = 0; i < mode->num_rates; i++) {
- struct ieee80211_rate *rate = &mode->rates[i];
-
- if (rate->flags & IEEE80211_RATE_SUPPORTED)
- return rate;
- }
-
- printk(KERN_DEBUG "rate_control_lowest_rate - no supported rates "
- "found\n");
- return &mode->rates[0];
-}
-
-
struct global_rate_control {
int dummy;
};
}
-static struct ieee80211_rate *
+static void
rate_control_simple_get_rate(void *priv, struct net_device *dev,
+ struct ieee80211_hw_mode *mode,
struct sk_buff *skb,
- struct rate_control_extra *extra)
+ struct rate_selection *sel)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct ieee80211_hw_mode *mode = extra->mode;
struct sta_info *sta;
- int rateidx, nonerp_idx;
- u16 fc;
-
- memset(extra, 0, sizeof(*extra));
-
- fc = le16_to_cpu(hdr->frame_control);
- if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA ||
- (hdr->addr1[0] & 0x01)) {
- /* Send management frames and broadcast/multicast data using
- * lowest rate. */
- /* TODO: this could probably be improved.. */
- return rate_control_lowest_rate(local, mode);
- }
+ int rateidx;
sta = sta_info_get(local, hdr->addr1);
- if (!sta)
- return rate_control_lowest_rate(local, mode);
-
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (sdata->bss && sdata->bss->force_unicast_rateidx > -1)
- sta->txrate = sdata->bss->force_unicast_rateidx;
+ if (!sta) {
+ sel->rate = rate_lowest(local, mode, NULL);
+ return;
+ }
rateidx = sta->txrate;
if (rateidx >= mode->num_rates)
rateidx = mode->num_rates - 1;
- sta->last_txrate = rateidx;
- nonerp_idx = rateidx;
- while (nonerp_idx > 0 &&
- ((mode->rates[nonerp_idx].flags & IEEE80211_RATE_ERP) ||
- !(mode->rates[nonerp_idx].flags & IEEE80211_RATE_SUPPORTED) ||
- !(sta->supp_rates & BIT(nonerp_idx))))
- nonerp_idx--;
- extra->nonerp = &mode->rates[nonerp_idx];
-
sta_info_put(sta);
- return &mode->rates[rateidx];
+ sel->rate = &mode->rates[rateidx];
}
static ieee80211_txrx_result
ieee80211_tx_h_rate_ctrl(struct ieee80211_txrx_data *tx)
{
- struct rate_control_extra extra;
+ struct rate_selection rsel;
if (likely(!tx->u.tx.rate)) {
- memset(&extra, 0, sizeof(extra));
- extra.mode = tx->u.tx.mode;
- extra.ethertype = tx->ethertype;
-
- tx->u.tx.rate = rate_control_get_rate(tx->local, tx->dev,
- tx->skb, &extra);
- if (unlikely(extra.probe != NULL)) {
+ rate_control_get_rate(tx->dev, tx->u.tx.mode, tx->skb, &rsel);
+ tx->u.tx.rate = rsel.rate;
+ if (unlikely(rsel.probe != NULL)) {
tx->u.tx.control->flags |=
IEEE80211_TXCTL_RATE_CTRL_PROBE;
tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG;
tx->u.tx.control->alt_retry_rate = tx->u.tx.rate->val;
- tx->u.tx.rate = extra.probe;
+ tx->u.tx.rate = rsel.probe;
} else
tx->u.tx.control->alt_retry_rate = -1;
if (tx->u.tx.mode->mode == MODE_IEEE80211G &&
(tx->sdata->flags & IEEE80211_SDATA_USE_PROTECTION) &&
- (tx->flags & IEEE80211_TXRXD_FRAGMENTED) && extra.nonerp) {
+ (tx->flags & IEEE80211_TXRXD_FRAGMENTED) && rsel.nonerp) {
tx->u.tx.last_frag_rate = tx->u.tx.rate;
- if (extra.probe)
+ if (rsel.probe)
tx->flags &= ~IEEE80211_TXRXD_TXPROBE_LAST_FRAG;
else
tx->flags |= IEEE80211_TXRXD_TXPROBE_LAST_FRAG;
- tx->u.tx.rate = extra.nonerp;
- tx->u.tx.control->rate = extra.nonerp;
+ tx->u.tx.rate = rsel.nonerp;
+ tx->u.tx.control->rate = rsel.nonerp;
tx->u.tx.control->flags &= ~IEEE80211_TXCTL_RATE_CTRL_PROBE;
} else {
tx->u.tx.last_frag_rate = tx->u.tx.rate;
struct net_device *bdev;
struct ieee80211_sub_if_data *sdata = NULL;
struct ieee80211_if_ap *ap = NULL;
- struct ieee80211_rate *rate;
- struct rate_control_extra extra;
+ struct rate_selection rsel;
u8 *b_head, *b_tail;
int bh_len, bt_len;
}
if (control) {
- memset(&extra, 0, sizeof(extra));
- extra.mode = local->oper_hw_mode;
-
- rate = rate_control_get_rate(local, local->mdev, skb, &extra);
- if (!rate) {
+ rate_control_get_rate(local->mdev, local->oper_hw_mode, skb,
+ &rsel);
+ if (!rsel.rate) {
if (net_ratelimit()) {
- printk(KERN_DEBUG "%s: ieee80211_beacon_get: no rate "
- "found\n", wiphy_name(local->hw.wiphy));
+ printk(KERN_DEBUG "%s: ieee80211_beacon_get: "
+ "no rate found\n",
+ wiphy_name(local->hw.wiphy));
}
dev_kfree_skb(skb);
return NULL;
control->tx_rate =
((sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE) &&
- (rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
- rate->val2 : rate->val;
+ (rsel.rate->flags & IEEE80211_RATE_PREAMBLE2)) ?
+ rsel.rate->val2 : rsel.rate->val;
control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
control->power_level = local->hw.conf.power_level;
control->flags |= IEEE80211_TXCTL_NO_ACK;
projects / linux-2.6-omap-h63xx.git / commitdiff