[ARM] S3C: Add i2c1 device definition

Add device definition and support functions for the
second i2c device (i2c1). If this is selected, the first
i2c bus will become index 0 instead of index -1.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index f0d6fa616b6cc3f14c02d0dc3f2c6ba67117327e..4d5cd7ee8c150eba9a37e02bc4d72329e852d66d 100644 (file)
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -41,6 +41,7 @@
 #define S3C64XX_PA_SYSCON      (0x7E00F000)
 #define S3C64XX_PA_TIMER       (0x7F006000)
 #define S3C64XX_PA_IIC0                (0x7F004000)
+#define S3C64XX_PA_IIC1                (0x7F00F000)
 
 #define S3C64XX_PA_GPIO                (0x7F008000)
 #define S3C64XX_VA_GPIO                S3C_ADDR(0x00500000)
@@ -60,5 +61,6 @@
 #define S3C_PA_HSMMC1          S3C64XX_PA_HSMMC1
 #define S3C_PA_HSMMC2          S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC             S3C64XX_PA_IIC0
+#define S3C_PA_IIC1            S3C64XX_PA_IIC1
 
 #endif /* __ASM_ARCH_6400_MAP_H */

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index e6e64968a611cc44c4d778255bda0659ed2624d8..d7a6e487f218276072925174efbd58a3e9b28de9 100644 (file)
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -160,3 +160,9 @@ config S3C_DEV_HSMMC1
        depends on PLAT_S3C
        help
          Compile in platform device definitions for HSMMC channel 1
+
+config S3C_DEV_I2C1
+       bool
+       depends on PLAT_S3C
+       help
+         Compile in platform device definitions for I2C channel 1

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 187fa95b87d59bb947daacc8e8f824e32caa54d5..3fcee0c44e180e81e6e6f7e7f3da5c8748cc4899 100644 (file)
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -23,3 +23,4 @@ obj-y                         += gpio-config.o
 obj-$(CONFIG_S3C_DEV_HSMMC)    += dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)   += dev-hsmmc1.o
 obj-y                          += dev-i2c0.o
+obj-$(CONFIG_S3C_DEV_I2C1)     += dev-i2c1.o

diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 21870fd2ec987239b4c73cb7ebea7bbb25f16040..2c0128c77c6e98385a11fc9c157be8caca7f5b44 100644 (file)
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -37,12 +37,16 @@ static struct resource s3c_i2c_resource[] = {
 
 struct platform_device s3c_device_i2c0 = {
        .name             = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+       .id               = 0,
+#else
        .id               = -1,
+#endif
        .num_resources    = ARRAY_SIZE(s3c_i2c_resource),
        .resource         = s3c_i2c_resource,
 };
 
-struct s3c2410_platform_i2c default_i2c_data __initdata = {
+static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
        .flags          = 0,
        .slave_addr     = 0x10,
        .bus_freq       = 100*1000,
@@ -55,7 +59,7 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
        struct s3c2410_platform_i2c *npd;
 
        if (!pd)
-               pd = &default_i2c_data;
+               pd = &default_i2c_data0;
 
        npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
        if (!npd)

diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
new file mode 100644 (file)
index 0000000..9658fb0
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-i2c1.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>
+ *     http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for i2c device 1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+       [0] = {
+               .start = S3C_PA_IIC1,
+               .end   = S3C_PA_IIC1 + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start = IRQ_IIC1,
+               .end   = IRQ_IIC1,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+struct platform_device s3c_device_i2c1 = {
+       .name             = "s3c2410-i2c",
+       .id               = 1,
+       .num_resources    = ARRAY_SIZE(s3c_i2c_resource),
+       .resource         = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
+       .flags          = 0,
+       .bus_num        = 1,
+       .slave_addr     = 0x10,
+       .bus_freq       = 100*1000,
+       .max_freq       = 400*1000,
+       .sda_delay      = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+       struct s3c2410_platform_i2c *npd;
+
+       if (!pd)
+               pd = &default_i2c_data1;
+
+       npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+       if (!npd)
+               printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+       else if (!npd->cfg_gpio)
+               npd->cfg_gpio = s3c_i2c1_cfg_gpio;
+
+       s3c_device_i2c1.dev.platform_data = npd;
+}

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index d9e0c543ebd6bef8306a543d420ed33b4c5efae1..0e342d1fafbb1c15a1e51e5c05fedff53e50ca17 100644 (file)
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -28,6 +28,7 @@ extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
+extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;

diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 5073b1e74ee874da08123dd5ea2524a5d032dfac..dc1dfcb9bc6c63034e0a42750ab334ed72ed06d0 100644 (file)
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -48,8 +48,10 @@ struct s3c2410_platform_i2c {
  * as the driver will no longer carry defaults.
  */
 extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
 
 #endif /* __ASM_ARCH_IIC_H */

diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index bc25689c3f8376aef0e80c0a49cf3faeae97956a..02e8dd4c97d51bf2a33c1cd4d548b2c54ea5eb3c 100644 (file)
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -70,6 +70,7 @@
 #define IRQ_CAMIF_C            S3C64XX_IRQ_VIC0(3)
 #define IRQ_CAMIF_P            S3C64XX_IRQ_VIC0(4)
 #define IRQ_CAMIF_MC           S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1       S3C64XX_IRQ_VIC0(5)
 #define IRQ_S3C6410_IIS                S3C64XX_IRQ_VIC0(6)
 #define IRQ_S3C6400_CAMIF_MP   S3C64XX_IRQ_VIC0(6)
 #define IRQ_CAMIF_WE_C         S3C64XX_IRQ_VIC0(7)
@@ -144,6 +145,10 @@
 #define IRQ_TIMER3             S3C64XX_TIMER_IRQ(3)
 #define IRQ_TIMER4             S3C64XX_TIMER_IRQ(4)
 
+/* compatibility for device defines */
+
+#define IRQ_IIC1               IRQ_S3C6410_IIC1
+
 /* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
  * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
  * which we place after the pair of VICs. */