]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
W1: ds2490.c magic number work
authorDavid Fries <david@fries.net>
Thu, 16 Oct 2008 05:05:08 +0000 (22:05 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 16 Oct 2008 18:21:51 +0000 (11:21 -0700)
This replaces some magic numbers with marcos and corrects one marco.

Signed-off-by: David Fries <david@fries.net>
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/w1/masters/ds2490.c

index 0f356939b349d1fff733b75cc0055d243738bfcd..29df1d2998b21a1418bfa0291a50666692106d77 100644 (file)
@@ -88,7 +88,7 @@
 #define COMM_DT                                0x2000
 #define COMM_SPU                       0x1000
 #define COMM_F                         0x0800
-#define COMM_NTP                       0x0400
+#define COMM_NTF                       0x0400
 #define COMM_ICP                       0x0200
 #define COMM_RST                       0x0100
 
@@ -440,7 +440,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
                        printk("\n");
                }
 #endif
-       } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
+       } while (!(buf[0x08] & ST_IDLE) && !(err < 0) && ++count < 100);
 
        if (err >= 16 && st->status & ST_EPOF) {
                printk(KERN_INFO "Resetting device after ST_EPOF.\n");
@@ -470,8 +470,16 @@ static int ds_reset(struct ds_device *dev)
 {
        int err;
 
-       //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
-       err = ds_send_control(dev, 0x43, SPEED_NORMAL);
+       /* Other potentionally interesting flags for reset.
+        *
+        * COMM_NTF: Return result register feedback.  This could be used to
+        * detect some conditions such as short, alarming presence, or
+        * detect if a new device was detected.
+        *
+        * COMM_SE which allows SPEED_NORMAL, SPEED_FLEXIBLE, SPEED_OVERDRIVE:
+        * Select the data transfer rate.
+        */
+       err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_IM, SPEED_NORMAL);
        if (err)
                return err;