drivers/ata/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 47892e6f5ded72f310e0de62c0ec152ce6350f7e..4b99ed0c59bb2cbada622776825725791e05d997 100644 (file)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -837,7 +837,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
        if (is_slave) {
                /* clear TIME1|IE1|PPE1|DTE1 */
                master_data &= 0xff0f;
-               /* Enable SITRE (seperate slave timing register) */
+               /* Enable SITRE (separate slave timing register) */
                master_data |= 0x4000;
                /* enable PPE1, IE1 and TIME1 as needed */
                master_data |= (control << 4);

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index bdbd55af70228ad38e646a4aa9e8bfcc1f0d0f37..361cf50cbdeab53565f57e3dcc6c84ec64cfd439 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3097,7 +3097,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
 /**
  *     ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *     @link: link on which timings will be programmed
- *     @r_failed_dev: out paramter for failed device
+ *     @r_failed_dev: out parameter for failed device
  *
  *     Standard implementation of the function used to tune and set
  *     ATA device disk transfer mode (PIO3, UDMA6, etc.).  If

diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 67e574de31e855c5ae6b1a046d1bc3f5b5f29c1c..db057b183d601b95c9ff950bfaef5acba39de562 100644 (file)
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
        if (irq < 0)
                return irq;
 
-       /* Setup struct containing private infomation */
+       /* Setup struct containing private information */
        info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 043dcd35106c0877aed1ce07e91a8f6a9d4b8892..dc33220fe5b20ca9588af25522d40288627bf2cf 100644 (file)
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
                idetm_data &= 0xCC0F;
                idetm_data |= (control << 4);
 
-               /* Slave timing in seperate register */
+               /* Slave timing in separate register */
                pci_read_config_byte(dev, 0x44, &slave_data);
                slave_data &= 0x0F << shift;
                slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;

diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 1eda821e5e395b32dd78a86bc8c7ab2bd58fd537..e0c2cc29d0ca93d60b970441ef0d4d54599aced9 100644 (file)
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
                idetm_data &= 0xCC0F;
                idetm_data |= (control << 4);
 
-               /* Slave timing in seperate register */
+               /* Slave timing in separate register */
                pci_read_config_byte(dev, 0x44, &slave_data);
                slave_data &= 0xF0;
                slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 87546d9f1ca0839cf5067d94116af34ae297c7e7..dc7e91562e436fafadab3d2796e328ac4cf5b351 100644 (file)
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
        if (adev->dma_mode < XFER_UDMA_0) {
                /* bits 3-0 hold recovery timing bits 8-10 active timing and
-                  the higer bits are dependant on the device */
+                  the higher bits are dependant on the device */
                timing &= ~0x870F;
                timing |= mwdma_bits[speed];
        } else {
@@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
        if (adev->dma_mode < XFER_UDMA_0) {
                /* bits 3-0 hold recovery timing bits 8-10 active timing and
-                  the higer bits are dependant on the device, bit 15 udma */
+                  the higher bits are dependant on the device, bit 15 udma */
                timing &= ~0x870F;
                timing |= mwdma_bits[speed];
        } else {