]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ide-floppy: remove struct idefloppy_capacity_descriptor
authorBorislav Petkov <bbpetkov@yahoo.de>
Sat, 2 Feb 2008 18:56:35 +0000 (19:56 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sat, 2 Feb 2008 18:56:35 +0000 (19:56 +0100)
Also,
- remove the accompanying 4 byte idefloppy_capacity_header.
- rename functions from idefloppy_... to ide_floppy_... after cleanup.
- simplify loop in ide_floppy_get_capacity() by reversing if-test condition
  logically.
- finally, fix white space and checkpatch.pl issues

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-floppy.c

index 5d84fa5f3dc6b5758ebc94e5a9fc46d9f0bb4f74..28a0bae94e82f4c756c12e4f26f2e60670781a41 100644 (file)
@@ -119,29 +119,7 @@ typedef struct idefloppy_packet_command_s {
 
 #define        PC_SUPPRESS_ERROR               6       /* Suppress error reporting */
 
-/*
- *     Format capacity
- */
-typedef struct {
-       u8              reserved[3];
-       u8              length;                 /* Length of the following descriptors in bytes */
-} idefloppy_capacity_header_t;
-
-typedef struct {
-       u32             blocks;                 /* Number of blocks */
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-       unsigned        dc              :2;     /* Descriptor Code */
-       unsigned        reserved        :6;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-       unsigned        reserved        :6;
-       unsigned        dc              :2;     /* Descriptor Code */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-       u8              length_msb;             /* Block Length (MSB)*/
-       u16             length;                 /* Block Length */
-} idefloppy_capacity_descriptor_t;
-
+/* format capacities descriptor codes */
 #define CAPACITY_INVALID       0x00
 #define CAPACITY_UNFORMATTED   0x01
 #define CAPACITY_CURRENT       0x02
@@ -184,8 +162,8 @@ typedef struct ide_floppy_obj {
         */
        /* Current format */
        int blocks, block_size, bs_factor;
-       /* Last format capacity */
-       idefloppy_capacity_descriptor_t capacity;
+       /* Last format capacity descriptor */
+       u8 cap_desc[8];
        /* Copy of the flexible disk page */
        u8 flexible_disk_page[32];
        /* Write protect */
@@ -1141,17 +1119,17 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
 }
 
 /*
- *     Determine if a media is present in the floppy drive, and if so,
- *     its LBA capacity.
+ * Determine if a media is present in the floppy drive, and if so, its LBA
+ * capacity.
  */
-static int idefloppy_get_capacity (ide_drive_t *drive)
+static int ide_floppy_get_capacity(ide_drive_t *drive)
 {
        idefloppy_floppy_t *floppy = drive->driver_data;
        idefloppy_pc_t pc;
-       idefloppy_capacity_header_t *header;
-       idefloppy_capacity_descriptor_t *descriptor;
-       int i, descriptors, rc = 1, blocks, length;
-       
+       u8 *cap_desc;
+       u8 header_len, desc_cnt;
+       int i, rc = 1, blocks, length;
+
        drive->bios_cyl = 0;
        drive->bios_head = drive->bios_sect = 0;
        floppy->blocks = 0;
@@ -1163,17 +1141,26 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
                printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
                return 1;
        }
-       header = (idefloppy_capacity_header_t *) pc.buffer;
-       descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t);
-       descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+       header_len = pc.buffer[3];
+       cap_desc = &pc.buffer[4];
+       desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
+
+       for (i = 0; i < desc_cnt; i++) {
+               unsigned int desc_start = 4 + i*8;
+
+               blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
+               length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
+
+               debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
+                               i, blocks * length / 1024, blocks, length);
 
-       for (i = 0; i < descriptors; i++, descriptor++) {
-               blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks);
-               length = descriptor->length = be16_to_cpu(descriptor->length);
+               if (i)
+                       continue;
+               /*
+                * the code below is valid only for the 1st descriptor, ie i=0
+                */
 
-               if (!i) 
-               {
-               switch (descriptor->dc) {
+               switch (pc.buffer[desc_start + 4] & 0x03) {
                /* Clik! drive returns this instead of CAPACITY_CURRENT */
                case CAPACITY_UNFORMATTED:
                        if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
@@ -1184,23 +1171,25 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
                                break;
                case CAPACITY_CURRENT:
                        /* Normal Zip/LS-120 disks */
-                       if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t)))
+                       if (memcmp(cap_desc, &floppy->cap_desc, 8))
                                printk(KERN_INFO "%s: %dkB, %d blocks, %d "
                                        "sector size\n", drive->name,
                                        blocks * length / 1024, blocks, length);
-                       floppy->capacity = *descriptor;
+                       memcpy(&floppy->cap_desc, cap_desc, 8);
+
                        if (!length || length % 512) {
                                printk(KERN_NOTICE "%s: %d bytes block size "
                                        "not supported\n", drive->name, length);
                        } else {
-                                floppy->blocks = blocks;
-                                floppy->block_size = length;
-                                if ((floppy->bs_factor = length / 512) != 1)
-                                        printk(KERN_NOTICE "%s: warning: non "
+                               floppy->blocks = blocks;
+                               floppy->block_size = length;
+                               floppy->bs_factor = length / 512;
+                               if (floppy->bs_factor != 1)
+                                       printk(KERN_NOTICE "%s: warning: non "
                                                "512 bytes block size not "
                                                "fully supported\n",
                                                drive->name);
-                                rc = 0;
+                               rc = 0;
                        }
                        break;
                case CAPACITY_NO_CARTRIDGE:
@@ -1215,52 +1204,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive)
                                "in drive\n", drive->name);
                        break;
                }
-               }
-               if (!i) {
-                       debug_log("Descriptor 0 Code: %d\n", descriptor->dc);
-               }
-               debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
-                               i, blocks * length / 1024, blocks, length);
+               debug_log("Descriptor 0 Code: %d\n",
+                         pc.buffer[desc_start + 4] & 0x03);
        }
 
        /* Clik! disk does not support get_flexible_disk_page */
-        if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
+       if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags))
                (void) ide_floppy_get_flexible_disk_page(drive);
-       }
 
        set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor);
        return rc;
 }
 
 /*
-** Obtain the list of formattable capacities.
-** Very similar to idefloppy_get_capacity, except that we push the capacity
-** descriptors to userland, instead of our own structures.
-**
-** Userland gives us the following structure:
-**
-** struct idefloppy_format_capacities {
-**        int nformats;
-**        struct {
-**                int nblocks;
-**                int blocksize;
-**                } formats[];
-**        } ;
-**
-** userland initializes nformats to the number of allocated formats[]
-** records.  On exit we set nformats to the number of records we've
-** actually initialized.
-**
-*/
+ * Obtain the list of formattable capacities.
+ * Very similar to ide_floppy_get_capacity, except that we push the capacity
+ * descriptors to userland, instead of our own structures.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_capacities {
+ *     int nformats;
+ *     struct {
+ *             int nblocks;
+ *             int blocksize;
+ *     } formats[];
+ * };
+ *
+ * userland initializes nformats to the number of allocated formats[] records.
+ * On exit we set nformats to the number of records we've actually initialized.
+ */
 
-static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
 {
-        idefloppy_pc_t pc;
-       idefloppy_capacity_header_t *header;
-        idefloppy_capacity_descriptor_t *descriptor;
-       int i, descriptors, blocks, length;
-       int u_array_size;
-       int u_index;
+       idefloppy_pc_t pc;
+       u8 header_len, desc_cnt;
+       int i, blocks, length, u_array_size, u_index;
        int __user *argp;
 
        if (get_user(u_array_size, arg))
@@ -1272,30 +1251,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
        idefloppy_create_read_capacity_cmd(&pc);
        if (idefloppy_queue_pc_tail(drive, &pc)) {
                printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
-                return (-EIO);
-        }
-        header = (idefloppy_capacity_header_t *) pc.buffer;
-        descriptors = header->length /
-               sizeof(idefloppy_capacity_descriptor_t);
-       descriptor = (idefloppy_capacity_descriptor_t *) (header + 1);
+               return (-EIO);
+       }
+       header_len = pc.buffer[3];
+       desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
 
        u_index = 0;
        argp = arg + 1;
 
        /*
-       ** We always skip the first capacity descriptor.  That's the
-       ** current capacity.  We are interested in the remaining descriptors,
-       ** the formattable capacities.
-       */
+        * We always skip the first capacity descriptor.  That's the current
+        * capacity.  We are interested in the remaining descriptors, the
+        * formattable capacities.
+        */
+       for (i = 1; i < desc_cnt; i++) {
+               unsigned int desc_start = 4 + i*8;
 
-       for (i=0; i<descriptors; i++, descriptor++) {
                if (u_index >= u_array_size)
                        break;  /* User-supplied buffer too small */
-               if (i == 0)
-                       continue;       /* Skip the first descriptor */
 
-               blocks = be32_to_cpu(descriptor->blocks);
-               length = be16_to_cpu(descriptor->length);
+               blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
+               length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
 
                if (put_user(blocks, argp))
                        return(-EFAULT);
@@ -1535,7 +1511,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy)
        }
 
 
-       (void) idefloppy_get_capacity(drive);
+       (void) ide_floppy_get_capacity(drive);
        idefloppy_add_settings(drive);
 }
 
@@ -1630,7 +1606,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
                        (void) idefloppy_queue_pc_tail(drive, &pc);
                }
 
-               if (idefloppy_get_capacity (drive)
+               if (ide_floppy_get_capacity(drive)
                   && (filp->f_flags & O_NDELAY) == 0
                    /*
                    ** Allow O_NDELAY to open a drive without a disk, or with
@@ -1734,7 +1710,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file,
        case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
                return 0;
        case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
-               return idefloppy_get_format_capacities(drive, argp);
+               return ide_floppy_get_format_capacities(drive, argp);
        case IDEFLOPPY_IOCTL_FORMAT_START:
 
                if (!(file->f_mode & 2))