]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
igb: remove 82576 quad adapter
authorAlexander Duyck <alexander.h.duyck@intel.com>
Fri, 8 Aug 2008 23:51:26 +0000 (16:51 -0700)
committerJeff Garzik <jgarzik@redhat.com>
Wed, 27 Aug 2008 09:36:12 +0000 (05:36 -0400)
Disable support for device 8086:10E8.  Currently the result of loading the
driver with the device present causes system instability.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/net/igb/e1000_82575.c
drivers/net/igb/e1000_hw.h
drivers/net/igb/igb_ethtool.c
drivers/net/igb/igb_main.c

index bb823acc7443183b41f454b756e9206c67c483ec..f5e2e7235fcbf197a5d427b49df86cef9d3d7c8b 100644 (file)
@@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
        case E1000_DEV_ID_82576:
        case E1000_DEV_ID_82576_FIBER:
        case E1000_DEV_ID_82576_SERDES:
-       case E1000_DEV_ID_82576_QUAD_COPPER:
                mac->type = e1000_82576;
                break;
        default:
index a65ccc3095c372117ece11b8a05b05bdf10a1162..99504a600a80f8348a99bdd2ffc9b367bab08819 100644 (file)
@@ -41,7 +41,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_82576                    0x10C9
 #define E1000_DEV_ID_82576_FIBER              0x10E6
 #define E1000_DEV_ID_82576_SERDES             0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
index 3eb78a66f8b6dfe33d53a83d6093c74df60a1357..58906c984be9f641e8e87c1acac40a098387a022 100644 (file)
@@ -1750,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
                /* return success for non excluded adapter ports */
                retval = 0;
                break;
-       case E1000_DEV_ID_82576_QUAD_COPPER:
-               /* quad port adapters only support WoL on port A */
-               if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
-                       wol->supported = 0;
-                       break;
-               }
-               /* return success for non excluded adapter ports */
-               retval = 0;
-               break;
        default:
                /* dual port cards only support WoL on port A from now on
                 * unless it was enabled in the eeprom for port B
index e6eb13a303c0c9f622e98f01f2620a54bbf89dd7..634c4c9d87bed037911c5a4b37cc5d410b425706 100644 (file)
@@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = {
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
-       { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
        { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -1217,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
                if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
                        adapter->eeprom_wol = 0;
                break;
-       case E1000_DEV_ID_82576_QUAD_COPPER:
-               /* if quad port adapter, disable WoL on all but port A */
-               if (global_quad_port_a != 0)
-                       adapter->eeprom_wol = 0;
-               else
-                       adapter->flags |= IGB_FLAG_QUAD_PORT_A;
-               /* Reset for multiple quad port adapters */
-               if (++global_quad_port_a == 4)
-                       global_quad_port_a = 0;
-               break;
        }
 
        /* initialize the wol settings based on the eeprom settings */