]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] ppc64: PCI error rate statistics
authorLinas Vepstas <linas@linas.org>
Fri, 4 Nov 2005 00:48:52 +0000 (18:48 -0600)
committerPaul Mackerras <paulus@samba.org>
Thu, 10 Nov 2005 00:33:11 +0000 (11:33 +1100)
04-eeh-statistics.patch

This minor patch adds some statistics-gathering counters that allow the
behaviour of the EEH subsystem o be monitored. While far from perfect,
it does provide a rudimentary device that makes understanding of the
current state of the system a bit easier.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/ppc64/kernel/eeh.c

index 99f11b66b5a00f48a7c4dfb2b5a0e3a7d62aa1ce..926d3110dfd75963c10c3791a2416627e2ebb12e 100644 (file)
@@ -102,6 +102,10 @@ static DEFINE_SPINLOCK(slot_errbuf_lock);
 static int eeh_error_buf_size;
 
 /* System monitoring statistics */
+static DEFINE_PER_CPU(unsigned long, no_device);
+static DEFINE_PER_CPU(unsigned long, no_dn);
+static DEFINE_PER_CPU(unsigned long, no_cfg_addr);
+static DEFINE_PER_CPU(unsigned long, ignored_check);
 static DEFINE_PER_CPU(unsigned long, total_mmio_ffs);
 static DEFINE_PER_CPU(unsigned long, false_positives);
 static DEFINE_PER_CPU(unsigned long, ignored_failures);
@@ -493,8 +497,6 @@ static void eeh_event_handler(void *dummy)
                notifier_call_chain (&eeh_notifier_chain,
                                     EEH_NOTIFY_FREEZE, event);
 
-               __get_cpu_var(slot_resets)++;
-
                pci_dev_put(event->dev);
                kfree(event);
        }
@@ -546,17 +548,24 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
        if (!eeh_subsystem_enabled)
                return 0;
 
-       if (!dn)
+       if (!dn) {
+               __get_cpu_var(no_dn)++;
                return 0;
+       }
        pdn = PCI_DN(dn);
 
        /* Access to IO BARs might get this far and still not want checking. */
        if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
            pdn->eeh_mode & EEH_MODE_NOCHECK) {
+               __get_cpu_var(ignored_check)++;
+#ifdef DEBUG
+               printk ("EEH:ignored check for %s %s\n", pci_name (dev), dn->full_name);
+#endif
                return 0;
        }
 
        if (!pdn->eeh_config_addr) {
+               __get_cpu_var(no_cfg_addr)++;
                return 0;
        }
 
@@ -590,6 +599,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 
        /* prevent repeated reports of this failure */
        pdn->eeh_mode |= EEH_MODE_ISOLATED;
+        __get_cpu_var(slot_resets)++;
 
        reset_state = rets[0];
 
@@ -657,8 +667,10 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
        /* Finding the phys addr + pci device; this is pretty quick. */
        addr = eeh_token_to_phys((unsigned long __force) token);
        dev = pci_get_device_by_addr(addr);
-       if (!dev)
+       if (!dev) {
+               __get_cpu_var(no_device)++;
                return val;
+       }
 
        dn = pci_device_to_OF_node(dev);
        eeh_dn_check_failure (dn, dev);
@@ -903,12 +915,17 @@ static int proc_eeh_show(struct seq_file *m, void *v)
        unsigned int cpu;
        unsigned long ffs = 0, positives = 0, failures = 0;
        unsigned long resets = 0;
+       unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0;
 
        for_each_cpu(cpu) {
                ffs += per_cpu(total_mmio_ffs, cpu);
                positives += per_cpu(false_positives, cpu);
                failures += per_cpu(ignored_failures, cpu);
                resets += per_cpu(slot_resets, cpu);
+               no_dev += per_cpu(no_device, cpu);
+               no_dn += per_cpu(no_dn, cpu);
+               no_cfg += per_cpu(no_cfg_addr, cpu);
+               no_check += per_cpu(ignored_check, cpu);
        }
 
        if (0 == eeh_subsystem_enabled) {
@@ -916,13 +933,17 @@ static int proc_eeh_show(struct seq_file *m, void *v)
                seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs);
        } else {
                seq_printf(m, "EEH Subsystem is enabled\n");
-               seq_printf(m, "eeh_total_mmio_ffs=%ld\n"
-                          "eeh_false_positives=%ld\n"
-                          "eeh_ignored_failures=%ld\n"
-                          "eeh_slot_resets=%ld\n"
-                               "eeh_fail_count=%d\n",
-                          ffs, positives, failures, resets,
-                               eeh_fail_count.counter);
+               seq_printf(m,
+                               "no device=%ld\n"
+                               "no device node=%ld\n"
+                               "no config address=%ld\n"
+                               "check not wanted=%ld\n"
+                               "eeh_total_mmio_ffs=%ld\n"
+                               "eeh_false_positives=%ld\n"
+                               "eeh_ignored_failures=%ld\n"
+                               "eeh_slot_resets=%ld\n",
+                               no_dev, no_dn, no_cfg, no_check,
+                               ffs, positives, failures, resets);
        }
 
        return 0;