sata_via: don't diddle with ATA_NIEN in ->freeze

vt6420 completely loses its ability to raise IRQ for ATAPI devices if
ATA_NIEN is diddled with in ->freeze.  Further investigation is
necessary to determine whether this problem is shared on other
controllers but it doesn't seem to be at this point.

Make vt6420's ->freeze only clear IRQ to fix this problem.  This makes
vt6420 relatively more prone to IRQ storms but the controller is way
too braindamaged to worry about that anyway.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 88f0565c88836df0eeaa6cf359ce031029c161c8..55b01236a6f042fc661388bb798154def97c6b58 100644 (file)
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -74,6 +74,7 @@ enum {
 static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
 static u32 svia_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void svia_noop_freeze(struct ata_port *ap);
 static void vt6420_error_handler(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
@@ -128,7 +129,7 @@ static const struct ata_port_operations vt6420_sata_ops = {
        .qc_issue               = ata_qc_issue_prot,
        .data_xfer              = ata_pio_data_xfer,
 
-       .freeze                 = ata_bmdma_freeze,
+       .freeze                 = svia_noop_freeze,
        .thaw                   = ata_bmdma_thaw,
        .error_handler          = vt6420_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
@@ -204,6 +205,15 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
        outl(val, ap->ioaddr.scr_addr + (4 * sc_reg));
 }
 
+static void svia_noop_freeze(struct ata_port *ap)
+{
+       /* Some VIA controllers choke if ATA_NIEN is manipulated in
+        * certain way.  Leave it alone and just clear pending IRQ.
+        */
+       ata_chk_status(ap);
+       ap->ops->irq_clear(ap);
+}
+
 /**
  *     vt6420_prereset - prereset for vt6420
  *     @ap: target ATA port