e1000: fix stack size

Here's the patch. It shrinks the stack from 1152 bytes to 192 bytes (the
first version, that only did the e1000_option part, got it down to 600
bytes). About half comes from not using multiple "e1000_option"
structures, the other half comes from turning the "e1000_opt_list[]"
arrays into "static const" instead, so that gcc doesn't copy them onto the
stack.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reveiewed-by: Auke Kok <auke-jan.h.kok@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index b9f90a5d3d4d1968f5ed3153b9960a9902cef97b..213437d131547ff0e632e94bb75094831f6f967d 100644 (file)
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -208,7 +208,7 @@ struct e1000_option {
                } r;
                struct { /* list_option info */
                        int nr;
-                       struct e1000_opt_list { int i; char *str; } *p;
+                       const struct e1000_opt_list { int i; char *str; } *p;
                } l;
        } arg;
 };
@@ -242,7 +242,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
                break;
        case list_option: {
                int i;
-               struct e1000_opt_list *ent;
+               const struct e1000_opt_list *ent;
 
                for (i = 0; i < opt->arg.l.nr; i++) {
                        ent = &opt->arg.l.p[i];
@@ -279,7 +279,9 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter);
 
 void __devinit e1000_check_options(struct e1000_adapter *adapter)
 {
+       struct e1000_option opt;
        int bd = adapter->bd_number;
+
        if (bd >= E1000_MAX_NIC) {
                DPRINTK(PROBE, NOTICE,
                       "Warning: no configuration for board #%i\n", bd);
@@ -287,19 +289,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
        }
 
        { /* Transmit Descriptor Count */
-               struct e1000_option opt = {
+               struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+               int i;
+               e1000_mac_type mac_type = adapter->hw.mac_type;
+
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Transmit Descriptors",
                        .err  = "using default of "
                                __MODULE_STRING(E1000_DEFAULT_TXD),
                        .def  = E1000_DEFAULT_TXD,
-                       .arg  = { .r = { .min = E1000_MIN_TXD }}
+                       .arg  = { .r = {
+                               .min = E1000_MIN_TXD,
+                               .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+                               }}
                };
-               struct e1000_tx_ring *tx_ring = adapter->tx_ring;
-               int i;
-               e1000_mac_type mac_type = adapter->hw.mac_type;
-               opt.arg.r.max = mac_type < e1000_82544 ?
-                       E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
                if (num_TxDescriptors > bd) {
                        tx_ring->count = TxDescriptors[bd];
@@ -313,19 +317,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                        tx_ring[i].count = tx_ring->count;
        }
        { /* Receive Descriptor Count */
-               struct e1000_option opt = {
+               struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+               int i;
+               e1000_mac_type mac_type = adapter->hw.mac_type;
+
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Receive Descriptors",
                        .err  = "using default of "
                                __MODULE_STRING(E1000_DEFAULT_RXD),
                        .def  = E1000_DEFAULT_RXD,
-                       .arg  = { .r = { .min = E1000_MIN_RXD }}
+                       .arg  = { .r = {
+                               .min = E1000_MIN_RXD,
+                               .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+                       }}
                };
-               struct e1000_rx_ring *rx_ring = adapter->rx_ring;
-               int i;
-               e1000_mac_type mac_type = adapter->hw.mac_type;
-               opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
-                       E1000_MAX_82544_RXD;
 
                if (num_RxDescriptors > bd) {
                        rx_ring->count = RxDescriptors[bd];
@@ -339,7 +345,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                        rx_ring[i].count = rx_ring->count;
        }
        { /* Checksum Offload Enable/Disable */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = enable_option,
                        .name = "Checksum Offload",
                        .err  = "defaulting to Enabled",
@@ -363,7 +369,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                         { E1000_FC_FULL,    "Flow Control Enabled" },
                         { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
 
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = list_option,
                        .name = "Flow Control",
                        .err  = "reading default settings from EEPROM",
@@ -381,7 +387,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Transmit Interrupt Delay */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Transmit Interrupt Delay",
                        .err  = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -399,7 +405,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Transmit Absolute Interrupt Delay */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Transmit Absolute Interrupt Delay",
                        .err  = "using default of " __MODULE_STRING(DEFAULT_TADV),
@@ -417,7 +423,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Receive Interrupt Delay */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Receive Interrupt Delay",
                        .err  = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -435,7 +441,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Receive Absolute Interrupt Delay */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Receive Absolute Interrupt Delay",
                        .err  = "using default of " __MODULE_STRING(DEFAULT_RADV),
@@ -453,7 +459,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Interrupt Throttling Rate */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = range_option,
                        .name = "Interrupt Throttling Rate (ints/sec)",
                        .err  = "using default of " __MODULE_STRING(DEFAULT_ITR),
@@ -497,7 +503,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Smart Power Down */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = enable_option,
                        .name = "PHY Smart Power Down",
                        .err  = "defaulting to Disabled",
@@ -513,7 +519,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
                }
        }
        { /* Kumeran Lock Loss Workaround */
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = enable_option,
                        .name = "Kumeran Lock Loss Workaround",
                        .err  = "defaulting to Enabled",
@@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 
 static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 {
+       struct e1000_option opt;
        unsigned int speed, dplx, an;
        int bd = adapter->bd_number;
 
        { /* Speed */
-               struct e1000_opt_list speed_list[] = {{          0, "" },
-                                                     {   SPEED_10, "" },
-                                                     {  SPEED_100, "" },
-                                                     { SPEED_1000, "" }};
+               static const struct e1000_opt_list speed_list[] = {
+                       {          0, "" },
+                       {   SPEED_10, "" },
+                       {  SPEED_100, "" },
+                       { SPEED_1000, "" }};
 
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = list_option,
                        .name = "Speed",
                        .err  = "parameter ignored",
@@ -604,11 +612,12 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
                }
        }
        { /* Duplex */
-               struct e1000_opt_list dplx_list[] = {{           0, "" },
-                                                    { HALF_DUPLEX, "" },
-                                                    { FULL_DUPLEX, "" }};
+               static const struct e1000_opt_list dplx_list[] = {
+                       {           0, "" },
+                       { HALF_DUPLEX, "" },
+                       { FULL_DUPLEX, "" }};
 
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = list_option,
                        .name = "Duplex",
                        .err  = "parameter ignored",
@@ -637,7 +646,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
                       "parameter ignored\n");
                adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
        } else { /* Autoneg */
-               struct e1000_opt_list an_list[] =
+               static const struct e1000_opt_list an_list[] =
                        #define AA "AutoNeg advertising "
                        {{ 0x01, AA "10/HD" },
                         { 0x02, AA "10/FD" },
@@ -671,7 +680,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
                         { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
                         { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
 
-               struct e1000_option opt = {
+               opt = (struct e1000_option) {
                        .type = list_option,
                        .name = "AutoNeg",
                        .err  = "parameter ignored",