return ret;
}
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk->parent->rate / (n + 1);
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/*
if (clk == &dpll3_ck)
return -EINVAL;
- if (clk->parent->rate == clk_get_rate(clk))
+ if (clk->parent->rate == omap2_get_dpll_rate(clk))
r = _omap3_noncore_dpll_bypass(clk);
else
r = _omap3_noncore_dpll_lock(clk);
_omap3_noncore_dpll_stop(clk);
}
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+
+ /* Set mult (M), div1 (N), freqsel */
+ v |= m << __ffs(dd->mult_mask);
+ v |= n << __ffs(dd->div1_mask);
+ v |= freqsel << __ffs(dd->freqsel_mask);
+
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL with the rounded target rate. Returns -EINVAL upon
+ * error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u16 freqsel;
+ struct dpll_data *dd;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
+ freqsel);
+
+ omap3_dpll_recalc(clk);
+
+ return 0;
+}
+
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (omap_rev() == OMAP3430_REV_ES1_0) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+ return omap3_noncore_dpll_set_rate(clk, rate);
+}
+
static const struct clkops clkops_noncore_dpll_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
};
+/* DPLL autoidle read/set code */
+
+
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read
static void omap3_dpll_allow_idle(struct clk *clk);
static void omap3_dpll_deny_idle(struct clk *clk);
static u32 omap3_dpll_autoidle_read(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.dpll_data = &dpll1_dd,
.flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
.dpll_data = &dpll2_dd,
.flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_CORE_DPLL_MASK,
.auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.dpll_data = &dpll4_dd,
.flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_dpll4_set_rate,
.recalc = &omap3_dpll_recalc,
};
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.dpll_data = &dpll5_dd,
.flags = RATE_PROPAGATES,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
projects / linux-2.6-omap-h63xx.git / commitdiff