]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
siimage: add sil_* I/O ops
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 28 Apr 2008 21:44:38 +0000 (23:44 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 28 Apr 2008 21:44:38 +0000 (23:44 +0200)
Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to
merge code accessing configuration registers through PCI and MMIO together.

[ because of this SATA initialization bits from setup_mmio_siimage() are
  moved to init_chipset_siimage() ]

This also cuts code size a bit:

   text    data     bss     dec     hex filename
   4437     164       0    4601    11f9 drivers/ide/pci/siimage.o.before
   3979     164       0    4143    102f drivers/ide/pci/siimage.o.after

While at it:

* Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}.

* Fixup CodingStyle in setup_mmio_siimage().

* Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage().

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/siimage.c

index f0c4234bacabd7fa6667209db76c39f0555230fc..cf8a7594ba3d3058b34c20de502bd2ace32b0445 100644 (file)
@@ -2,7 +2,7 @@
  * Copyright (C) 2001-2002     Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2003          Red Hat <alan@redhat.com>
  * Copyright (C) 2007          MontaVista Software, Inc.
- * Copyright (C) 2007          Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2008     Bartlomiej Zolnierkiewicz
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
@@ -124,6 +124,54 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
        return base;
 }
 
+static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
+{
+       u8 tmp = 0;
+
+       if (pci_get_drvdata(dev))
+               tmp = readb((void __iomem *)addr);
+       else
+               pci_read_config_byte(dev, addr, &tmp);
+
+       return tmp;
+}
+
+static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
+{
+       u16 tmp = 0;
+
+       if (pci_get_drvdata(dev))
+               tmp = readw((void __iomem *)addr);
+       else
+               pci_read_config_word(dev, addr, &tmp);
+
+       return tmp;
+}
+
+static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
+{
+       if (pci_get_drvdata(dev))
+               writeb(val, (void __iomem *)addr);
+       else
+               pci_write_config_byte(dev, addr, val);
+}
+
+static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
+{
+       if (pci_get_drvdata(dev))
+               writew(val, (void __iomem *)addr);
+       else
+               pci_write_config_word(dev, addr, val);
+}
+
+static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
+{
+       if (pci_get_drvdata(dev))
+               writel(val, (void __iomem *)addr);
+       else
+               pci_write_config_dword(dev, addr, val);
+}
+
 /**
  *     sil_udma_filter         -       compute UDMA mask
  *     @drive: IDE device
@@ -139,12 +187,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive)
        ide_hwif_t *hwif = drive->hwif;
        struct pci_dev *dev = to_pci_dev(hwif->dev);
        unsigned long base = (unsigned long) hwif->hwif_data;
-       u8 mask = 0, scsc = 0;
+       u8 mask = 0, scsc;
 
-       if (hwif->mmio)
-               scsc = hwif->INB(base + 0x4A);
-       else
-               pci_read_config_byte(dev, 0x8A, &scsc);
+       scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
 
        if ((scsc & 0x30) == 0x10)      /* 133 */
                mask = ATA_UDMA6;
@@ -179,6 +224,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
        const u16 data_speed[]  = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
 
        ide_hwif_t *hwif        = HWIF(drive);
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
        ide_drive_t *pair       = ide_get_paired_drive(drive);
        u32 speedt              = 0;
        u16 speedp              = 0;
@@ -203,36 +249,20 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
        speedp = data_speed[pio];
        speedt = tf_speed[tf_pio];
 
-       if (hwif->mmio) {
-               hwif->OUTW(speedp, addr);
-               hwif->OUTW(speedt, tfaddr);
-               /* Now set up IORDY */
-               if (pio > 2)
-                       hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
-               else
-                       hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
-
-               mode = hwif->INB(base + addr_mask);
-               mode &= ~(unit ? 0x30 : 0x03);
-               mode |= (unit ? 0x10 : 0x01);
-               hwif->OUTB(mode, base + addr_mask);
-       } else {
-               struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-               pci_write_config_word(dev, addr, speedp);
-               pci_write_config_word(dev, tfaddr, speedt);
-               pci_read_config_word(dev, tfaddr - 2, &speedp);
-               speedp &= ~0x200;
-               /* Set IORDY for mode 3 or 4 */
-               if (pio > 2)
-                       speedp |= 0x200;
-               pci_write_config_word(dev, tfaddr - 2, speedp);
-
-               pci_read_config_byte(dev, addr_mask, &mode);
-               mode &= ~(unit ? 0x30 : 0x03);
-               mode |= (unit ? 0x10 : 0x01);
-               pci_write_config_byte(dev, addr_mask, mode);
-       }
+       sil_iowrite16(dev, speedp, addr);
+       sil_iowrite16(dev, speedt, tfaddr);
+
+       /* now set up IORDY */
+       speedp = sil_ioread16(dev, tfaddr - 2);
+       speedp &= ~0x200;
+       if (pio > 2)
+               speedp |= 0x200;
+       sil_iowrite16(dev, speedp, tfaddr - 2);
+
+       mode = sil_ioread8(dev, base + addr_mask);
+       mode &= ~(unit ? 0x30 : 0x03);
+       mode |= (unit ? 0x10 : 0x01);
+       sil_iowrite8(dev, mode, base + addr_mask);
 }
 
 /**
@@ -261,17 +291,10 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
        unsigned long ma        = siimage_seldev(drive, 0x08);
        unsigned long ua        = siimage_seldev(drive, 0x0C);
 
-       if (hwif->mmio) {
-               scsc = hwif->INB(base + 0x4A);
-               mode = hwif->INB(base + addr_mask);
-               multi = hwif->INW(ma);
-               ultra = hwif->INW(ua);
-       } else {
-               pci_read_config_byte(dev, 0x8A, &scsc);
-               pci_read_config_byte(dev, addr_mask, &mode);
-               pci_read_config_word(dev, ma, &multi);
-               pci_read_config_word(dev, ua, &ultra);
-       }
+       scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A));
+       mode = sil_ioread8(dev, base + addr_mask);
+       multi = sil_ioread16(dev, ma);
+       ultra = sil_ioread16(dev, ua);
 
        mode &= ~((unit) ? 0x30 : 0x03);
        ultra &= ~0x3F;
@@ -289,15 +312,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
                mode |= (unit ? 0x20 : 0x02);
        }
 
-       if (hwif->mmio) {
-               hwif->OUTB(mode, base + addr_mask);
-               hwif->OUTW(multi, ma);
-               hwif->OUTW(ultra, ua);
-       } else {
-               pci_write_config_byte(dev, addr_mask, mode);
-               pci_write_config_word(dev, ma, multi);
-               pci_write_config_word(dev, ua, ultra);
-       }
+       sil_iowrite8(dev, mode, base + addr_mask);
+       sil_iowrite16(dev, multi, ma);
+       sil_iowrite16(dev, ultra, ua);
 }
 
 /* returns 1 if dma irq issued, 0 otherwise */
@@ -460,26 +477,21 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
 {
        resource_size_t bar5    = pci_resource_start(dev, 5);
        unsigned long barsize   = pci_resource_len(dev, 5);
-       u8 tmpbyte      = 0;
        void __iomem *ioaddr;
-       u32 tmp, irq_mask;
 
        /*
         *      Drop back to PIO if we can't map the mmio. Some
         *      systems seem to get terminally confused in the PCI
         *      spaces.
         */
-        
-       if(!request_mem_region(bar5, barsize, name))
-       {
+       if (!request_mem_region(bar5, barsize, name)) {
                printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
                return 0;
        }
-               
+
        ioaddr = ioremap(bar5, barsize);
 
-       if (ioaddr == NULL)
-       {
+       if (ioaddr == NULL) {
                release_mem_region(bar5, barsize);
                return 0;
        }
@@ -487,62 +499,6 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
        pci_set_master(dev);
        pci_set_drvdata(dev, (void *) ioaddr);
 
-       if (pdev_is_sata(dev)) {
-               /* make sure IDE0/1 interrupts are not masked */
-               irq_mask = (1 << 22) | (1 << 23);
-               tmp = readl(ioaddr + 0x48);
-               if (tmp & irq_mask) {
-                       tmp &= ~irq_mask;
-                       writel(tmp, ioaddr + 0x48);
-                       readl(ioaddr + 0x48); /* flush */
-               }
-               writel(0, ioaddr + 0x148);
-               writel(0, ioaddr + 0x1C8);
-       }
-
-       writeb(0, ioaddr + 0xB4);
-       writeb(0, ioaddr + 0xF4);
-       tmpbyte = readb(ioaddr + 0x4A);
-
-       switch(tmpbyte & 0x30) {
-               case 0x00:
-                       /* In 100 MHz clocking, try and switch to 133 */
-                       writeb(tmpbyte|0x10, ioaddr + 0x4A);
-                       break;
-               case 0x10:
-                       /* On 133Mhz clocking */
-                       break;
-               case 0x20:
-                       /* On PCIx2 clocking */
-                       break;
-               case 0x30:
-                       /* Clocking is disabled */
-                       /* 133 clock attempt to force it on */
-                       writeb(tmpbyte & ~0x20, ioaddr + 0x4A);
-                       break;
-       }
-
-       tmpbyte = readb(ioaddr + 0x4A);
-
-       writeb(      0x72, ioaddr + 0xA1);
-       writew(    0x328A, ioaddr + 0xA2);
-       writel(0x62DD62DD, ioaddr + 0xA4);
-       writel(0x43924392, ioaddr + 0xA8);
-       writel(0x40094009, ioaddr + 0xAC);
-       writeb(      0x72, ioaddr + 0xE1);
-       writew(    0x328A, ioaddr + 0xE2);
-       writel(0x62DD62DD, ioaddr + 0xE4);
-       writel(0x43924392, ioaddr + 0xE8);
-       writel(0x40094009, ioaddr + 0xEC);
-
-       if (pdev_is_sata(dev)) {
-               writel(0xFFFF0000, ioaddr + 0x108);
-               writel(0xFFFF0000, ioaddr + 0x188);
-               writel(0x00680000, ioaddr + 0x148);
-               writel(0x00680000, ioaddr + 0x1C8);
-       }
-
-       proc_reports_siimage(dev, (tmpbyte>>4), name);
        return 1;
 }
 
@@ -557,50 +513,80 @@ static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
 
 static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name)
 {
-       u8 rev = dev->revision, tmpbyte = 0, BA5_EN = 0;
+       unsigned long base, scsc_addr;
+       void __iomem *ioaddr = NULL;
+       u8 rev = dev->revision, tmp = 0, BA5_EN = 0;
 
        pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
 
        pci_read_config_byte(dev, 0x8A, &BA5_EN);
-       if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) {
-               if (setup_mmio_siimage(dev, name)) {
-                       return 0;
+
+       if ((BA5_EN & 0x01) || pci_resource_start(dev, 5)) {
+               if (setup_mmio_siimage(dev, name))
+                       ioaddr = pci_get_drvdata(dev);
+       }
+
+       base = (unsigned long)ioaddr;
+
+       if (ioaddr && pdev_is_sata(dev)) {
+               u32 tmp32, irq_mask;
+
+               /* make sure IDE0/1 interrupts are not masked */
+               irq_mask = (1 << 22) | (1 << 23);
+               tmp32 = readl(ioaddr + 0x48);
+               if (tmp32 & irq_mask) {
+                       tmp32 &= ~irq_mask;
+                       writel(tmp32, ioaddr + 0x48);
+                       readl(ioaddr + 0x48); /* flush */
                }
+               writel(0, ioaddr + 0x148);
+               writel(0, ioaddr + 0x1C8);
        }
 
-       pci_write_config_byte(dev, 0x80, 0x00);
-       pci_write_config_byte(dev, 0x84, 0x00);
-       pci_read_config_byte(dev, 0x8A, &tmpbyte);
-       switch(tmpbyte & 0x30) {
-               case 0x00:
-                       /* 133 clock attempt to force it on */
-                       pci_write_config_byte(dev, 0x8A, tmpbyte|0x10);
-               case 0x30:
-                       /* if clocking is disabled */
-                       /* 133 clock attempt to force it on */
-                       pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20);
-               case 0x10:
-                       /* 133 already */
-                       break;
-               case 0x20:
-                       /* BIOS set PCI x2 clocking */
-                       break;
+       sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
+       sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
+
+       scsc_addr = base ? (base + 0x4A) : 0x8A;
+       tmp = sil_ioread8(dev, scsc_addr);
+
+       switch (tmp & 0x30) {
+       case 0x00:
+               /* On 100MHz clocking, try and switch to 133MHz */
+               sil_iowrite8(dev, tmp | 0x10, scsc_addr);
+               break;
+       case 0x30:
+               /* Clocking is disabled, attempt to force 133MHz clocking. */
+               sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
+       case 0x10:
+               /* On 133Mhz clocking. */
+               break;
+       case 0x20:
+               /* On PCIx2 clocking. */
+               break;
        }
 
-       pci_read_config_byte(dev,   0x8A, &tmpbyte);
+       tmp = sil_ioread8(dev, scsc_addr);
 
-       pci_write_config_byte(dev,  0xA1, 0x72);
-       pci_write_config_word(dev,  0xA2, 0x328A);
-       pci_write_config_dword(dev, 0xA4, 0x62DD62DD);
-       pci_write_config_dword(dev, 0xA8, 0x43924392);
-       pci_write_config_dword(dev, 0xAC, 0x40094009);
-       pci_write_config_byte(dev,  0xB1, 0x72);
-       pci_write_config_word(dev,  0xB2, 0x328A);
-       pci_write_config_dword(dev, 0xB4, 0x62DD62DD);
-       pci_write_config_dword(dev, 0xB8, 0x43924392);
-       pci_write_config_dword(dev, 0xBC, 0x40094009);
+       sil_iowrite8(dev,        0x72, base + 0xA1);
+       sil_iowrite16(dev,     0x328A, base + 0xA2);
+       sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
+       sil_iowrite32(dev, 0x43924392, base + 0xA8);
+       sil_iowrite32(dev, 0x40094009, base + 0xAC);
+       sil_iowrite8(dev,        0x72, base ? (base + 0xE1) : 0xB1);
+       sil_iowrite16(dev,     0x328A, base ? (base + 0xE2) : 0xB2);
+       sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
+       sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
+       sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
+
+       if (base && pdev_is_sata(dev)) {
+               writel(0xFFFF0000, ioaddr + 0x108);
+               writel(0xFFFF0000, ioaddr + 0x188);
+               writel(0x00680000, ioaddr + 0x148);
+               writel(0x00680000, ioaddr + 0x1C8);
+       }
+
+       proc_reports_siimage(dev, tmp >> 4, name);
 
-       proc_reports_siimage(dev, (tmpbyte>>4), name);
        return 0;
 }
 
@@ -752,12 +738,7 @@ static u8 __devinit sil_cable_detect(ide_hwif_t *hwif)
 {
        struct pci_dev *dev = to_pci_dev(hwif->dev);
        unsigned long addr = siimage_selreg(hwif, 0);
-       u8 ata66 = 0;
-
-       if (pci_get_drvdata(dev) == NULL)
-               pci_read_config_byte(dev, addr, &ata66);
-       else
-               ata66 = hwif->INB(addr);
+       u8 ata66 = sil_ioread8(dev, addr);
 
        return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }