--- /dev/null
+Acer Laptop WMI Extras Driver
+http://code.google.com/p/aceracpi
+Version 0.1
+9th February 2008
+
+Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
+
+acer-wmi is a driver to allow you to control various parts of your Acer laptop
+hardware under Linux which are exposed via ACPI-WMI.
+
+This driver completely replaces the old out-of-tree acer_acpi, which I am
+currently maintaining for bug fixes only on pre-2.6.25 kernels. All development
+work is now focused solely on acer-wmi.
+
+Disclaimer
+**********
+
+Acer and Wistron have provided nothing towards the development acer_acpi or
+acer-wmi. All information we have has been through the efforts of the developers
+and the users to discover as much as possible about the hardware.
+
+As such, I do warn that this could break your hardware - this is extremely
+unlikely of course, but please bear this in mind.
+
+Background
+**********
+
+acer-wmi is derived from acer_acpi, originally developed by Mark
+Smith in 2005, then taken over by Carlos Corbacho in 2007, in order to activate
+the wireless LAN card under a 64-bit version of Linux, as acerhk[1] (the
+previous solution to the problem) relied on making 32 bit BIOS calls which are
+not possible in kernel space from a 64 bit OS.
+
+[1] acerhk: http://www.cakey.de/acerhk/
+
+Supported Hardware
+******************
+
+Please see the website for the current list of known working hardare:
+
+http://code.google.com/p/aceracpi/wiki/SupportedHardware
+
+If your laptop is not listed, or listed as unknown, and works with acer-wmi,
+please contact me with a copy of the DSDT.
+
+If your Acer laptop doesn't work with acer-wmi, I would also like to see the
+DSDT.
+
+To send me the DSDT, as root/sudo:
+
+cat /sys/firmware/acpi/DSDT > dsdt
+
+And send me the resulting 'dsdt' file.
+
+Usage
+*****
+
+On Acer laptops, acer-wmi should already be autoloaded based on DMI matching.
+For non-Acer laptops, until WMI based autoloading support is added, you will
+need to manually load acer-wmi.
+
+acer-wmi creates /sys/devices/platform/acer-wmi, and fills it with various
+files whose usage is detailed below, which enables you to control some of the
+following (varies between models):
+
+* the wireless LAN card radio
+* inbuilt Bluetooth adapter
+* inbuilt 3G card
+* mail LED of your laptop
+* brightness of the LCD panel
+
+Wireless
+********
+
+With regards to wireless, all acer-wmi does is enable the radio on the card. It
+is not responsible for the wireless LED - once the radio is enabled, this is
+down to the wireless driver for your card. So the behaviour of the wireless LED,
+once you enable the radio, will depend on your hardware and driver combination.
+
+e.g. With the BCM4318 on the Acer Aspire 5020 series:
+
+ndiswrapper: Light blinks on when transmitting
+bcm43xx/b43: Solid light, blinks off when transmitting
+
+Wireless radio control is unconditionally enabled - all Acer laptops that support
+acer-wmi come with built-in wireless. However, should you feel so inclined to
+ever wish to remove the card, or swap it out at some point, please get in touch
+with me, as we may well be able to gain some data on wireless card detection.
+
+To read the status of the wireless radio (0=off, 1=on):
+cat /sys/devices/platform/acer-wmi/wireless
+
+To enable the wireless radio:
+echo 1 > /sys/devices/platform/acer-wmi/wireless
+
+To disable the wireless radio:
+echo 0 > /sys/devices/platform/acer-wmi/wireless
+
+To set the state of the wireless radio when loading acer-wmi, pass:
+wireless=X (where X is 0 or 1)
+
+Bluetooth
+*********
+
+For bluetooth, this is an internal USB dongle, so once enabled, you will get
+a USB device connection event, and a new USB device appears. When you disable
+bluetooth, you get the reverse - a USB device disconnect event, followed by the
+device disappearing again.
+
+Bluetooth is autodetected by acer-wmi, so if you do not have a bluetooth module
+installed in your laptop, this file won't exist (please be aware that it is
+quite common for Acer not to fit bluetooth to their laptops - so just because
+you have a bluetooth button on the laptop, doesn't mean that bluetooth is
+installed).
+
+For the adventurously minded - if you want to buy an internal bluetooth
+module off the internet that is compatible with your laptop and fit it, then
+it will work just fine with acer-wmi.
+
+To read the status of the bluetooth module (0=off, 1=on):
+cat /sys/devices/platform/acer-wmi/wireless
+
+To enable the bluetooth module:
+echo 1 > /sys/devices/platform/acer-wmi/bluetooth
+
+To disable the bluetooth module:
+echo 0 > /sys/devices/platform/acer-wmi/bluetooth
+
+To set the state of the bluetooth module when loading acer-wmi, pass:
+bluetooth=X (where X is 0 or 1)
+
+3G
+**
+
+3G is currently not autodetected, so the 'threeg' file is always created under
+sysfs. So far, no-one in possession of an Acer laptop with 3G built-in appears to
+have tried Linux, or reported back, so we don't have any information on this.
+
+If you have an Acer laptop that does have a 3G card in, please contact me so we
+can properly detect these, and find out a bit more about them.
+
+To read the status of the 3G card (0=off, 1=on):
+cat /sys/devices/platform/acer-wmi/threeg
+
+To enable the 3G card:
+echo 1 > /sys/devices/platform/acer-wmi/threeg
+
+To disable the 3G card:
+echo 0 > /sys/devices/platform/acer-wmi/threeg
+
+To set the state of the 3G card when loading acer-wmi, pass:
+threeg=X (where X is 0 or 1)
+
+Mail LED
+********
+
+This can be found in most older Acer laptops supported by acer-wmi, and many
+newer ones - it is built into the 'mail' button, and blinks when active.
+
+On newer (WMID) laptops though, we have no way of detecting the mail LED. If
+your laptop identifies itself in dmesg as a WMID model, then please try loading
+acer_acpi with:
+
+force_series=2490
+
+This will use a known alternative method of reading/ writing the mail LED. If
+it works, please report back to me with the DMI data from your laptop so this
+can be added to acer-wmi.
+
+The LED is exposed through the LED subsystem, and can be found in:
+
+/sys/devices/platform/acer-wmi/leds/acer-mail:green/
+
+The mail LED is autodetected, so if you don't have one, the LED device won't
+be registered.
+
+If you have a mail LED that is not green, please report this to me.
+
+Backlight
+*********
+
+The backlight brightness control is available on all acer-wmi supported
+hardware. The maximum brightness level is usually 15, but on some newer laptops
+it's 10 (this is again autodetected).
+
+The backlight is exposed through the backlight subsystem, and can be found in:
+
+/sys/devices/platform/acer-wmi/backlight/acer-wmi/
+
+Credits
+*******
+
+Olaf Tauber, who did the real hard work when he developed acerhk
+http://www.informatik.hu-berlin.de/~tauber/acerhk
+All the authors of laptop ACPI modules in the kernel, whose work
+was an inspiration in the early days of acer_acpi
+Mathieu Segaud, who solved the problem with having to modprobe the driver
+twice in acer_acpi 0.2.
+Jim Ramsay, who added support for the WMID interface
+Mark Smith, who started the original acer_acpi
+
+And the many people who have used both acer_acpi and acer-wmi.
projects / linux-2.6-omap-h63xx.git / commitdiff