]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
Add Nokia CBUS support
authorTony Lindgren <tony@atomide.com>
Tue, 7 Apr 2009 23:19:46 +0000 (16:19 -0700)
committerTony Lindgren <tony@atomide.com>
Tue, 7 Apr 2009 23:26:33 +0000 (16:26 -0700)
17 files changed:
drivers/Makefile
drivers/cbus/Kconfig [new file with mode: 0644]
drivers/cbus/Makefile [new file with mode: 0644]
drivers/cbus/cbus.c [new file with mode: 0644]
drivers/cbus/cbus.h [new file with mode: 0644]
drivers/cbus/retu-headset.c [new file with mode: 0644]
drivers/cbus/retu-pwrbutton.c [new file with mode: 0644]
drivers/cbus/retu-rtc.c [new file with mode: 0644]
drivers/cbus/retu-user.c [new file with mode: 0644]
drivers/cbus/retu-wdt.c [new file with mode: 0644]
drivers/cbus/retu.c [new file with mode: 0644]
drivers/cbus/retu.h [new file with mode: 0644]
drivers/cbus/tahvo-usb.c [new file with mode: 0644]
drivers/cbus/tahvo-user.c [new file with mode: 0644]
drivers/cbus/tahvo.c [new file with mode: 0644]
drivers/cbus/tahvo.h [new file with mode: 0644]
drivers/cbus/user_retu_tahvo.h [new file with mode: 0644]

index 2618a6169a1304379a8644725f0663aee3ac7fd9..1ba9e471ca456c335d5eccb31ca55ca6d60d799d 100644 (file)
@@ -34,6 +34,8 @@ obj-$(CONFIG_CONNECTOR)               += connector/
 obj-$(CONFIG_FB_I810)           += video/i810/
 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
+obj-y                          += cbus/
+
 obj-y                          += serial/
 obj-$(CONFIG_PARPORT)          += parport/
 obj-y                          += base/ block/ misc/ mfd/ media/
diff --git a/drivers/cbus/Kconfig b/drivers/cbus/Kconfig
new file mode 100644 (file)
index 0000000..25f8039
--- /dev/null
@@ -0,0 +1,89 @@
+#
+# CBUS device configuration
+#
+
+menu "CBUS support"
+
+config CBUS
+       depends on ARCH_OMAP
+       bool "CBUS support on OMAP"
+       ---help---
+         CBUS is a proprietary serial protocol by Nokia.  It is mainly
+         used for accessing Energy Management auxiliary chips.
+
+         If you want CBUS support, you should say Y here.
+
+config CBUS_TAHVO
+       depends on CBUS
+       bool "Support for Tahvo"
+       ---help---
+         Tahvo is a mixed signal ASIC with some system features
+
+         If you want Tahvo support, you should say Y here.
+
+config CBUS_TAHVO_USER
+       depends on CBUS_TAHVO
+       bool "Support for Tahvo user space functions"
+       ---help---
+         If you want support for Tahvo's user space read/write etc. functions,
+         you should say Y here.
+
+config CBUS_TAHVO_USB
+       depends on CBUS_TAHVO && USB
+       tristate "Support for Tahvo USB transceiver"
+       ---help---
+         If you want Tahvo support for USB transceiver, say Y or M here.
+
+config CBUS_TAHVO_USB_HOST_BY_DEFAULT
+       depends on CBUS_TAHVO_USB && USB_OTG
+       boolean "Device in USB host mode by default"
+       ---help---
+         Say Y here, if you want the device to enter USB host mode
+         by default on bootup.
+
+config CBUS_RETU
+       depends on CBUS
+       bool "Support for Retu"
+       ---help---
+         Retu is a mixed signal ASIC with some system features
+
+         If you want Retu support, you should say Y here.
+
+config CBUS_RETU_USER
+       depends on CBUS_RETU
+       bool "Support for Retu user space functions"
+       ---help---
+         If you want support for Retu's user space read/write etc. functions,
+         you should say Y here.
+
+config CBUS_RETU_POWERBUTTON
+       depends on CBUS_RETU
+       bool "Support for Retu power button"
+       ---help---
+         The power button on Nokia 770 is connected to the Retu ASIC.
+
+         If you want support for the Retu power button, you should say Y here.
+
+config CBUS_RETU_RTC
+       depends on CBUS_RETU && SYSFS
+       tristate "Support for Retu pseudo-RTC"
+       ---help---
+         Say Y here if you want support for the device that alleges to be an
+         RTC in Retu. This will expose a sysfs interface for it.
+
+config CBUS_RETU_WDT
+       depends on CBUS_RETU && SYSFS
+       tristate "Support for Retu watchdog timer"
+       ---help---
+         Say Y here if you want support for the watchdog in Retu. This will
+         expose a sysfs interface to grok it.
+
+config CBUS_RETU_HEADSET
+       depends on CBUS_RETU && SYSFS
+       tristate "Support for headset detection with Retu/Vilma"
+       ---help---
+         Say Y here if you want support detecting a headset that's connected
+         to Retu/Vilma. Detection state and events are exposed through
+         sysfs.
+
+endmenu
diff --git a/drivers/cbus/Makefile b/drivers/cbus/Makefile
new file mode 100644 (file)
index 0000000..347c2a4
--- /dev/null
@@ -0,0 +1,14 @@
+#
+# Makefile for CBUS.
+#
+
+obj-$(CONFIG_CBUS)             += cbus.o
+obj-$(CONFIG_CBUS_TAHVO)       += tahvo.o
+obj-$(CONFIG_CBUS_RETU)                += retu.o
+obj-$(CONFIG_CBUS_TAHVO_USB)   += tahvo-usb.o
+obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
+obj-$(CONFIG_CBUS_RETU_RTC)    += retu-rtc.o
+obj-$(CONFIG_CBUS_RETU_WDT)    += retu-wdt.o
+obj-$(CONFIG_CBUS_TAHVO_USER)  += tahvo-user.o
+obj-$(CONFIG_CBUS_RETU_USER)   += retu-user.o
+obj-$(CONFIG_CBUS_RETU_HEADSET)        += retu-headset.o
diff --git a/drivers/cbus/cbus.c b/drivers/cbus/cbus.c
new file mode 100644 (file)
index 0000000..774acce
--- /dev/null
@@ -0,0 +1,293 @@
+/*
+ * drivers/cbus/cbus.c
+ *
+ * Support functions for CBUS serial protocol
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
+ *           David Weinehall <david.weinehall@nokia.com>, and
+ *           Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+
+#include <mach/board.h>
+#include <mach/board-nokia.h>
+
+#include <asm/io.h>
+
+#include "cbus.h"
+
+struct cbus_host *cbus_host = NULL;
+
+#ifdef CONFIG_ARCH_OMAP1
+/* We use our own MPUIO functions to get closer to 1MHz bus speed */
+
+static inline void cbus_set_gpio_direction(u32 base, int mpuio, int is_input)
+{
+       u16 w;
+
+       mpuio &= 0x0f;
+       w = __raw_readw(base + OMAP_MPUIO_IO_CNTL);
+       if (is_input)
+               w |= 1 << mpuio;
+       else
+               w &= ~(1 << mpuio);
+       __raw_writew(w, base + OMAP_MPUIO_IO_CNTL);
+
+}
+
+static inline void cbus_set_gpio_dataout(u32 base, int mpuio, int enable)
+{
+       u16 w;
+
+       mpuio &= 0x0f;
+       w = __raw_readw(base + OMAP_MPUIO_OUTPUT);
+       if (enable)
+               w |= 1 << mpuio;
+       else
+               w &= ~(1 << mpuio);
+       __raw_writew(w, base + OMAP_MPUIO_OUTPUT);
+}
+
+static inline int cbus_get_gpio_datain(u32 base, int mpuio)
+{
+       mpuio &= 0x0f;
+
+       return (__raw_readw(base + OMAP_MPUIO_INPUT_LATCH) & (1 << mpuio)) != 0;
+}
+
+static void cbus_send_bit(struct cbus_host *host, u32 base, int bit,
+                         int set_to_input)
+{
+       cbus_set_gpio_dataout(base, host->dat_gpio, bit ? 1 : 0);
+       cbus_set_gpio_dataout(base, host->clk_gpio, 1);
+
+       /* The data bit is read on the rising edge of CLK */
+       if (set_to_input)
+               cbus_set_gpio_direction(base, host->dat_gpio, 1);
+
+       cbus_set_gpio_dataout(base, host->clk_gpio, 0);
+}
+
+static u8 cbus_receive_bit(struct cbus_host *host, u32 base)
+{
+       u8 ret;
+
+       cbus_set_gpio_dataout(base, host->clk_gpio, 1);
+       ret = cbus_get_gpio_datain(base, host->dat_gpio);
+       cbus_set_gpio_dataout(base, host->clk_gpio, 0);
+
+       return ret;
+}
+
+#define cbus_output(base, gpio, val)   cbus_set_gpio_direction(base, gpio, 0)
+
+#else
+
+#define cbus_output(base, gpio, val)   gpio_direction_output(gpio, val)
+#define cbus_set_gpio_dataout(base, gpio, enable) gpio_set_value(gpio, enable)
+#define cbus_get_gpio_datain(base, int, gpio) gpio_get_value(gpio)
+
+static void _cbus_send_bit(struct cbus_host *host, int bit, int set_to_input)
+{
+       gpio_set_value(host->dat_gpio, bit ? 1 : 0);
+       gpio_set_value(host->clk_gpio, 1);
+
+       /* The data bit is read on the rising edge of CLK */
+       if (set_to_input)
+               gpio_direction_input(host->dat_gpio);
+
+       gpio_set_value(host->clk_gpio, 0);
+}
+
+static u8 _cbus_receive_bit(struct cbus_host *host)
+{
+       u8 ret;
+
+       gpio_set_value(host->clk_gpio, 1);
+       ret = gpio_get_value(host->dat_gpio);
+       gpio_set_value(host->clk_gpio, 0);
+
+       return ret;
+}
+
+#define cbus_send_bit(host, base, bit, set_to_input) _cbus_send_bit(host, bit, set_to_input)
+#define cbus_receive_bit(host, base) _cbus_receive_bit(host)
+
+#endif
+
+static int cbus_transfer(struct cbus_host *host, int dev, int reg, int data)
+{
+       int i;
+       int is_read = 0;
+       unsigned long flags;
+       u32 base;
+
+#ifdef CONFIG_ARCH_OMAP1
+       base = OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE);
+#else
+       base = 0;
+#endif
+
+       if (data < 0)
+               is_read = 1;
+
+       /* We don't want interrupts disturbing our transfer */
+       spin_lock_irqsave(&host->lock, flags);
+
+       /* Reset state and start of transfer, SEL stays down during transfer */
+       cbus_set_gpio_dataout(base, host->sel_gpio, 0);
+
+       /* Set the DAT pin to output */
+       cbus_output(base, host->dat_gpio, 1);
+
+       /* Send the device address */
+       for (i = 3; i > 0; i--)
+               cbus_send_bit(host, base, dev & (1 << (i - 1)), 0);
+
+       /* Send the rw flag */
+       cbus_send_bit(host, base, is_read, 0);
+
+       /* Send the register address */
+       for (i = 5; i > 0; i--) {
+               int set_to_input = 0;
+
+               if (is_read && i == 1)
+                       set_to_input = 1;
+
+               cbus_send_bit(host, base, reg & (1 << (i - 1)), set_to_input);
+       }
+
+       if (!is_read) {
+               for (i = 16; i > 0; i--)
+                       cbus_send_bit(host, base, data & (1 << (i - 1)), 0);
+       } else {
+               cbus_set_gpio_dataout(base, host->clk_gpio, 1);
+               data = 0;
+
+               for (i = 16; i > 0; i--) {
+                       u8 bit = cbus_receive_bit(host, base);
+
+                       if (bit)
+                               data |= 1 << (i - 1);
+               }
+       }
+
+       /* Indicate end of transfer, SEL goes up until next transfer */
+       cbus_set_gpio_dataout(base, host->sel_gpio, 1);
+       cbus_set_gpio_dataout(base, host->clk_gpio, 1);
+       cbus_set_gpio_dataout(base, host->clk_gpio, 0);
+
+       spin_unlock_irqrestore(&host->lock, flags);
+
+       return is_read ? data : 0;
+}
+
+/*
+ * Read a given register from the device
+ */
+int cbus_read_reg(struct cbus_host *host, int dev, int reg)
+{
+       return cbus_host ? cbus_transfer(host, dev, reg, -1) : -ENODEV;
+}
+
+/*
+ * Write to a given register of the device
+ */
+int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val)
+{
+       return cbus_host ? cbus_transfer(host, dev, reg, (int)val) : -ENODEV;
+}
+
+int __init cbus_bus_init(void)
+{
+       const struct omap_cbus_config * cbus_config;
+       struct cbus_host *chost;
+       int ret;
+
+       chost = kmalloc(sizeof (*chost), GFP_KERNEL);
+       if (chost == NULL)
+               return -ENOMEM;
+
+       memset(chost, 0, sizeof (*chost));
+
+       spin_lock_init(&chost->lock);
+
+       cbus_config = omap_get_config(OMAP_TAG_CBUS, struct omap_cbus_config);
+
+       if (cbus_config == NULL) {
+               printk(KERN_ERR "cbus: Unable to retrieve config data\n");
+               return -ENODATA;
+       }
+
+       chost->clk_gpio = cbus_config->clk_gpio;
+       chost->dat_gpio = cbus_config->dat_gpio;
+       chost->sel_gpio = cbus_config->sel_gpio;
+
+#ifdef CONFIG_ARCH_OMAP1
+       if (!OMAP_GPIO_IS_MPUIO(chost->clk_gpio) ||
+           !OMAP_GPIO_IS_MPUIO(chost->dat_gpio) ||
+           !OMAP_GPIO_IS_MPUIO(chost->sel_gpio)) {
+               printk(KERN_ERR "cbus: Only MPUIO pins supported\n");
+               ret = -ENODEV;
+               goto exit1;
+       }
+#endif
+
+       if ((ret = gpio_request(chost->clk_gpio, "CBUS clk")) < 0)
+               goto exit1;
+
+       if ((ret = gpio_request(chost->dat_gpio, "CBUS data")) < 0)
+               goto exit2;
+
+       if ((ret = gpio_request(chost->sel_gpio, "CBUS sel")) < 0)
+               goto exit3;
+
+       gpio_direction_output(chost->clk_gpio, 0);
+       gpio_direction_input(chost->dat_gpio);
+       gpio_direction_output(chost->sel_gpio, 1);
+
+       gpio_set_value(chost->clk_gpio, 1);
+       gpio_set_value(chost->clk_gpio, 0);
+
+       cbus_host = chost;
+
+       return 0;
+exit3:
+       gpio_free(chost->dat_gpio);
+exit2:
+       gpio_free(chost->clk_gpio);
+exit1:
+       kfree(chost);
+       return ret;
+}
+
+subsys_initcall(cbus_bus_init);
+
+EXPORT_SYMBOL(cbus_host);
+EXPORT_SYMBOL(cbus_read_reg);
+EXPORT_SYMBOL(cbus_write_reg);
+
+MODULE_DESCRIPTION("CBUS serial protocol");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
diff --git a/drivers/cbus/cbus.h b/drivers/cbus/cbus.h
new file mode 100644 (file)
index 0000000..957224c
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * drivers/cbus/cbus.h
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
+ *           David Weinehall <david.weinehall@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __DRIVERS_CBUS_CBUS_H
+#define __DRIVERS_CBUS_CBUS_H
+
+struct cbus_host {
+       int clk_gpio, dat_gpio, sel_gpio;
+        spinlock_t lock;
+};
+
+extern struct cbus_host *cbus_host;
+
+extern int cbus_read_reg(struct cbus_host *host, int dev, int reg);
+extern int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val);
+
+#endif /* __DRIVERS_CBUS_CBUS_H */
diff --git a/drivers/cbus/retu-headset.c b/drivers/cbus/retu-headset.c
new file mode 100644 (file)
index 0000000..e798bc2
--- /dev/null
@@ -0,0 +1,355 @@
+/**
+ * Retu/Vilma headset detection
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * Written by Juha Yrjölä
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+
+#include "retu.h"
+
+#define RETU_ADC_CHANNEL_HOOKDET       0x05
+
+#define RETU_HEADSET_KEY               KEY_PHONE
+
+struct retu_headset {
+       spinlock_t                      lock;
+       struct mutex                    mutex;
+       struct platform_device          *pdev;
+       struct input_dev                *idev;
+       unsigned                        bias_enabled;
+       unsigned                        detection_enabled;
+       unsigned                        pressed;
+       struct timer_list               enable_timer;
+       struct timer_list               detect_timer;
+};
+
+static void retu_headset_set_bias(int enable)
+{
+       if (enable) {
+               retu_set_clear_reg_bits(RETU_REG_AUDTXR,
+                                       (1 << 0) | (1 << 1), 0);
+               msleep(2);
+               retu_set_clear_reg_bits(RETU_REG_AUDTXR, 1 << 3, 0);
+       } else {
+               retu_set_clear_reg_bits(RETU_REG_AUDTXR, 0,
+                                       (1 << 0) | (1 << 1) | (1 << 3));
+       }
+}
+
+static void retu_headset_enable(struct retu_headset *hs)
+{
+       mutex_lock(&hs->mutex);
+       if (!hs->bias_enabled) {
+               hs->bias_enabled = 1;
+               retu_headset_set_bias(1);
+       }
+       mutex_unlock(&hs->mutex);
+}
+
+static void retu_headset_disable(struct retu_headset *hs)
+{
+       mutex_lock(&hs->mutex);
+       if (hs->bias_enabled) {
+               hs->bias_enabled = 0;
+               retu_headset_set_bias(0);
+       }
+       mutex_unlock(&hs->mutex);
+}
+
+static void retu_headset_det_enable(struct retu_headset *hs)
+{
+       mutex_lock(&hs->mutex);
+       if (!hs->detection_enabled) {
+               hs->detection_enabled = 1;
+               retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
+               retu_enable_irq(RETU_INT_HOOK);
+       }
+       mutex_unlock(&hs->mutex);
+}
+
+static void retu_headset_det_disable(struct retu_headset *hs)
+{
+       unsigned long flags;
+
+       mutex_lock(&hs->mutex);
+       if (hs->detection_enabled) {
+               hs->detection_enabled = 0;
+               retu_disable_irq(RETU_INT_HOOK);
+               del_timer_sync(&hs->enable_timer);
+               del_timer_sync(&hs->detect_timer);
+               spin_lock_irqsave(&hs->lock, flags);
+               if (hs->pressed)
+                       input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
+               spin_unlock_irqrestore(&hs->lock, flags);
+               retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
+       }
+       mutex_unlock(&hs->mutex);
+}
+
+static ssize_t retu_headset_hookdet_show(struct device *dev,
+                                        struct device_attribute *attr,
+                                        char *buf)
+{
+       int val;
+
+       val = retu_read_adc(RETU_ADC_CHANNEL_HOOKDET);
+       return sprintf(buf, "%d\n", val);
+}
+
+static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
+
+static ssize_t retu_headset_enable_show(struct device *dev,
+                                       struct device_attribute *attr,
+                                       char *buf)
+{
+       struct retu_headset *hs = dev_get_drvdata(dev);
+
+       return sprintf(buf, "%u\n", hs->bias_enabled);
+}
+
+static ssize_t retu_headset_enable_store(struct device *dev,
+                                        struct device_attribute *attr,
+                                        const char *buf, size_t count)
+{
+       struct retu_headset *hs = dev_get_drvdata(dev);
+       int enable;
+
+       if (sscanf(buf, "%u", &enable) != 1)
+               return -EINVAL;
+       if (enable)
+               retu_headset_enable(hs);
+       else
+               retu_headset_disable(hs);
+       return count;
+}
+
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
+                  retu_headset_enable_show, retu_headset_enable_store);
+
+static ssize_t retu_headset_enable_det_show(struct device *dev,
+                                           struct device_attribute *attr,
+                                           char *buf)
+{
+       struct retu_headset *hs = dev_get_drvdata(dev);
+
+       return sprintf(buf, "%u\n", hs->detection_enabled);
+}
+
+static ssize_t retu_headset_enable_det_store(struct device *dev,
+                                            struct device_attribute *attr,
+                                            const char *buf, size_t count)
+{
+       struct retu_headset *hs = dev_get_drvdata(dev);
+       int enable;
+
+       if (sscanf(buf, "%u", &enable) != 1)
+               return -EINVAL;
+       if (enable)
+               retu_headset_det_enable(hs);
+       else
+               retu_headset_det_disable(hs);
+       return count;
+}
+
+static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
+                  retu_headset_enable_det_show,
+                  retu_headset_enable_det_store);
+
+static void retu_headset_hook_interrupt(unsigned long arg)
+{
+       struct retu_headset *hs = (struct retu_headset *) arg;
+       unsigned long flags;
+
+       retu_ack_irq(RETU_INT_HOOK);
+       spin_lock_irqsave(&hs->lock, flags);
+       if (!hs->pressed) {
+               /* Headset button was just pressed down. */
+               hs->pressed = 1;
+               input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
+       }
+       spin_unlock_irqrestore(&hs->lock, flags);
+       retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
+       mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
+}
+
+static void retu_headset_enable_timer(unsigned long arg)
+{
+       struct retu_headset *hs = (struct retu_headset *) arg;
+
+       retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
+       mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
+}
+
+static void retu_headset_detect_timer(unsigned long arg)
+{
+       struct retu_headset *hs = (struct retu_headset *) arg;
+       unsigned long flags;
+
+       spin_lock_irqsave(&hs->lock, flags);
+       if (hs->pressed) {
+               hs->pressed = 0;
+               input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
+       }
+       spin_unlock_irqrestore(&hs->lock, flags);
+}
+
+static int __init retu_headset_probe(struct platform_device *pdev)
+{
+       struct retu_headset *hs;
+       int r;
+
+       hs = kzalloc(sizeof(*hs), GFP_KERNEL);
+       if (hs == NULL)
+               return -ENOMEM;
+
+       hs->pdev = pdev;
+
+       hs->idev = input_allocate_device();
+       if (hs->idev == NULL) {
+               r = -ENOMEM;
+               goto err1;
+       }
+       hs->idev->name = "retu-headset";
+       hs->idev->dev.parent = &pdev->dev;
+       set_bit(EV_KEY, hs->idev->evbit);
+       set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
+       r = input_register_device(hs->idev);
+       if (r < 0)
+               goto err2;
+
+       r = device_create_file(&pdev->dev, &dev_attr_hookdet);
+       if (r < 0)
+               goto err3;
+       r = device_create_file(&pdev->dev, &dev_attr_enable);
+       if (r < 0)
+               goto err4;
+       r = device_create_file(&pdev->dev, &dev_attr_enable_det);
+       if (r < 0)
+               goto err5;
+       platform_set_drvdata(pdev, hs);
+
+       spin_lock_init(&hs->lock);
+       mutex_init(&hs->mutex);
+       setup_timer(&hs->enable_timer, retu_headset_enable_timer,
+                   (unsigned long) hs);
+       setup_timer(&hs->detect_timer, retu_headset_detect_timer,
+                   (unsigned long) hs);
+
+       r = retu_request_irq(RETU_INT_HOOK, retu_headset_hook_interrupt,
+                            (unsigned long) hs, "hookdet");
+       if (r != 0) {
+               dev_err(&pdev->dev, "hookdet IRQ not available\n");
+               goto err6;
+       }
+       retu_disable_irq(RETU_INT_HOOK);
+       return 0;
+err6:
+       device_remove_file(&pdev->dev, &dev_attr_enable_det);
+err5:
+       device_remove_file(&pdev->dev, &dev_attr_enable);
+err4:
+       device_remove_file(&pdev->dev, &dev_attr_hookdet);
+err3:
+       input_unregister_device(hs->idev);
+err2:
+       input_free_device(hs->idev);
+err1:
+       kfree(hs);
+       return r;
+}
+
+static int retu_headset_remove(struct platform_device *pdev)
+{
+       struct retu_headset *hs = platform_get_drvdata(pdev);
+
+       device_remove_file(&pdev->dev, &dev_attr_hookdet);
+       device_remove_file(&pdev->dev, &dev_attr_enable);
+       device_remove_file(&pdev->dev, &dev_attr_enable_det);
+       retu_headset_disable(hs);
+       retu_headset_det_disable(hs);
+       retu_free_irq(RETU_INT_HOOK);
+       input_unregister_device(hs->idev);
+       input_free_device(hs->idev);
+       return 0;
+}
+
+static int retu_headset_suspend(struct platform_device *pdev,
+                               pm_message_t mesg)
+{
+       struct retu_headset *hs = platform_get_drvdata(pdev);
+
+       mutex_lock(&hs->mutex);
+       if (hs->bias_enabled)
+               retu_headset_set_bias(0);
+       mutex_unlock(&hs->mutex);
+
+       return 0;
+}
+
+static int retu_headset_resume(struct platform_device *pdev)
+{
+       struct retu_headset *hs = platform_get_drvdata(pdev);
+
+       mutex_lock(&hs->mutex);
+       if (hs->bias_enabled)
+               retu_headset_set_bias(1);
+       mutex_unlock(&hs->mutex);
+
+       return 0;
+}
+
+static struct platform_driver retu_headset_driver = {
+       .probe          = retu_headset_probe,
+       .remove         = retu_headset_remove,
+       .suspend        = retu_headset_suspend,
+       .resume         = retu_headset_resume,
+       .driver         = {
+               .name   = "retu-headset",
+       },
+};
+
+static int __init retu_headset_init(void)
+{
+       int r;
+
+       printk(KERN_INFO "Retu/Vilma headset driver initializing\n");
+
+       r = platform_driver_register(&retu_headset_driver);
+       if (r < 0)
+               return r;
+
+       return 0;
+}
+
+static void __exit retu_headset_exit(void)
+{
+       platform_driver_unregister(&retu_headset_driver);
+}
+
+module_init(retu_headset_init);
+module_exit(retu_headset_exit);
+
+MODULE_DESCRIPTION("Retu/Vilma headset detection");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä");
diff --git a/drivers/cbus/retu-pwrbutton.c b/drivers/cbus/retu-pwrbutton.c
new file mode 100644 (file)
index 0000000..38d7aa4
--- /dev/null
@@ -0,0 +1,118 @@
+/**
+ * drivers/cbus/retu-pwrbutton.c
+ *
+ * Driver for sending retu power button event to input-layer
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ *
+ * Written by Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
+ *
+ * Contact Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+
+#include "retu.h"
+
+#define RETU_STATUS_PWRONX     (1 << 5)
+
+#define PWRBTN_DELAY           20
+#define PWRBTN_UP              0
+#define PWRBTN_PRESSED         1
+
+static int pwrbtn_state;
+static struct input_dev *pwrbtn_dev;
+static struct timer_list pwrbtn_timer;
+
+static void retubutton_timer_func(unsigned long arg)
+{
+       int state;
+
+       if (retu_read_reg(RETU_REG_STATUS) & RETU_STATUS_PWRONX)
+               state = PWRBTN_UP;
+       else
+               state = PWRBTN_PRESSED;
+
+       if (pwrbtn_state != state) {
+               input_report_key(pwrbtn_dev, KEY_POWER, state);
+               pwrbtn_state = state;
+       }
+}
+
+/**
+ * Interrupt function is called whenever power button key is pressed
+ * or released.
+ */
+static void retubutton_irq(unsigned long arg)
+{
+       retu_ack_irq(RETU_INT_PWR);
+       mod_timer(&pwrbtn_timer, jiffies + msecs_to_jiffies(PWRBTN_DELAY));
+}
+
+/**
+ * Init function.
+ * Allocates interrupt for power button and registers itself to input layer.
+ */
+static int __init retubutton_init(void)
+{
+       int irq;
+
+       printk(KERN_INFO "Retu power button driver initialized\n");
+       irq = RETU_INT_PWR;
+
+       init_timer(&pwrbtn_timer);
+       pwrbtn_timer.function = retubutton_timer_func;
+
+       if (retu_request_irq(irq, &retubutton_irq, 0, "PwrOnX") < 0) {
+               printk(KERN_ERR "%s@%s: Cannot allocate irq\n",
+                      __FUNCTION__, __FILE__);
+               return -EBUSY;
+       }
+
+       pwrbtn_dev = input_allocate_device();
+       if (!pwrbtn_dev)
+               return -ENOMEM;
+
+       pwrbtn_dev->evbit[0] = BIT_MASK(EV_KEY);
+       pwrbtn_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+       pwrbtn_dev->name = "retu-pwrbutton";
+
+       return input_register_device(pwrbtn_dev);
+}
+
+/**
+ * Cleanup function which is called when driver is unloaded
+ */
+static void __exit retubutton_exit(void)
+{
+       retu_free_irq(RETU_INT_PWR);
+       del_timer_sync(&pwrbtn_timer);
+       input_unregister_device(pwrbtn_dev);
+}
+
+module_init(retubutton_init);
+module_exit(retubutton_exit);
+
+MODULE_DESCRIPTION("Retu Power Button");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ari Saastamoinen");
diff --git a/drivers/cbus/retu-rtc.c b/drivers/cbus/retu-rtc.c
new file mode 100644 (file)
index 0000000..1ebc33b
--- /dev/null
@@ -0,0 +1,477 @@
+/**
+ * drivers/cbus/retu-rtc.c
+ *
+ * Support for Retu RTC
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Paul Mundt <paul.mundt@nokia.com> and
+ *            Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
+ * idea of what time actually is. It's left as a userspace excercise to map
+ * this back to time in the real world and ensure that calibration settings
+ * are sane to compensate for any horrible drift (on account of not being able
+ * to set the clock to anything).
+ *
+ * Days are semi-writeable. Namely, Retu will only track 255 days for us
+ * consecutively, after which the counter is explicitly stuck at 255 until
+ * someone comes along and clears it with a write. In the event that no one
+ * comes along and clears it, we no longer have any idea what day it is.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+
+#include "cbus.h"
+#include "retu.h"
+
+static struct mutex retu_rtc_mutex;
+static u16 retu_rtc_alarm_expired;
+static u16 retu_rtc_reset_occurred;
+
+static DECLARE_COMPLETION(retu_rtc_exited);
+static DECLARE_COMPLETION(retu_rtc_sync);
+
+static void retu_rtc_barrier(void);
+
+static void retu_rtc_device_release(struct device *dev)
+{
+       complete(&retu_rtc_exited);
+}
+
+static ssize_t retu_rtc_time_show(struct device *dev, struct device_attribute *attr,
+                                 char *buf)
+{
+       u16 dsr, hmr, dsr2;
+
+       mutex_lock(&retu_rtc_mutex);
+
+       do {
+               u16 dummy;
+
+               /*
+                * Not being in_interrupt() for a retu rtc IRQ, we need to
+                * read twice for consistency..
+                */
+               dummy   = retu_read_reg(RETU_REG_RTCDSR);
+               dsr     = retu_read_reg(RETU_REG_RTCDSR);
+
+               dummy   = retu_read_reg(RETU_REG_RTCHMR);
+               hmr     = retu_read_reg(RETU_REG_RTCHMR);
+
+               dummy   = retu_read_reg(RETU_REG_RTCDSR);
+               dsr2    = retu_read_reg(RETU_REG_RTCDSR);
+       } while ((dsr != dsr2));
+
+       mutex_unlock(&retu_rtc_mutex);
+
+       /*
+        * Format a 32-bit date-string for userspace
+        *
+        * days | hours | minutes | seconds
+        *
+        * 8 bits for each.
+        *
+        * This mostly sucks because days and seconds are tracked in RTCDSR
+        * while hours and minutes are tracked in RTCHMR. And yes, there
+        * really are no words that can describe an 8 bit day register (or
+        * rather, none that will be reprinted here).
+        */
+       return sprintf(buf, "0x%08x\n", (((dsr >> 8) & 0xff) << 24) |
+                                       (((hmr >> 8) & 0x1f) << 16) |
+                                        ((hmr & 0x3f) << 8) | (dsr & 0x3f));
+}
+
+static ssize_t retu_rtc_time_store(struct device *dev, struct device_attribute *attr,
+                                  const char *buf, size_t count)
+{
+       mutex_lock(&retu_rtc_mutex);
+       /*
+        * Writing anything to the day counter forces it to 0
+        * The seconds counter would be cleared by resetting the minutes counter,
+        * however this won't happen, since we are using the hh:mm counters as
+        * a set of free running counters and the day counter as a multiple
+        * overflow holder.
+        */
+
+       /* Reset day counter, but keep Temperature Shutdown state */
+       retu_write_reg(RETU_REG_RTCDSR,
+                      retu_read_reg(RETU_REG_RTCDSR) & (1 << 6));
+
+       mutex_unlock(&retu_rtc_mutex);
+
+       return count;
+}
+
+static DEVICE_ATTR(time, S_IRUGO | S_IWUSR, retu_rtc_time_show,
+                  retu_rtc_time_store);
+
+
+static ssize_t retu_rtc_reset_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+       /*
+        * Returns the status of the rtc
+        *
+        * 0: no reset has occurred or the status has been cleared
+        * 1: a reset has occurred
+        *
+        * RTC needs to be reset only when both main battery
+        * _AND_ backup battery are discharged
+        */
+       return sprintf(buf, "%u\n", retu_rtc_reset_occurred);
+}
+
+static void retu_rtc_do_reset(void)
+{
+       u16 ccr1;
+
+       ccr1 = retu_read_reg(RETU_REG_CC1);
+       /* RTC in reset */
+       retu_write_reg(RETU_REG_CC1, ccr1 | 0x0001);
+       /* RTC in normal operating mode */
+       retu_write_reg(RETU_REG_CC1, ccr1 & ~0x0001);
+
+       retu_rtc_barrier();
+       /* Disable alarm and RTC WD */
+       retu_write_reg(RETU_REG_RTCHMAR, 0x7f3f);
+       /* Set Calibration register to default value */
+       retu_write_reg(RETU_REG_RTCCALR, 0x00c0);
+
+       retu_rtc_alarm_expired = 0;
+       retu_rtc_reset_occurred = 1;
+}
+
+static ssize_t retu_rtc_reset_store(struct device *dev, struct device_attribute *attr,
+                                   const char *buf, size_t count)
+{
+       unsigned choice;
+
+       if(sscanf(buf, "%u", &choice) != 1)
+               return count;
+       mutex_lock(&retu_rtc_mutex);
+       if (choice == 0)
+               retu_rtc_reset_occurred = 0;
+       else if (choice == 1)
+               retu_rtc_do_reset();
+       mutex_unlock(&retu_rtc_mutex);
+       return count;
+}
+
+static DEVICE_ATTR(reset, S_IRUGO | S_IWUSR, retu_rtc_reset_show,
+                  retu_rtc_reset_store);
+
+static ssize_t retu_rtc_alarm_show(struct device *dev, struct device_attribute *attr,
+                                  char *buf)
+{
+       u16 chmar;
+       ssize_t retval;
+
+       mutex_lock(&retu_rtc_mutex);
+       /*
+        * Format a 16-bit date-string for userspace
+        *
+        * hours | minutes
+        * 8 bits for each.
+        */
+       chmar = retu_read_reg(RETU_REG_RTCHMAR);
+       /* No shifting needed, only masking unrelated bits */
+       retval = sprintf(buf, "0x%04x\n", chmar & 0x1f3f);
+       mutex_unlock(&retu_rtc_mutex);
+
+       return retval;
+}
+
+static ssize_t retu_rtc_alarm_store(struct device *dev, struct device_attribute *attr,
+                                   const char *buf, size_t count)
+{
+       u16 chmar;
+       unsigned alrm;
+       unsigned hours;
+       unsigned minutes;
+
+       mutex_lock(&retu_rtc_mutex);
+
+       if(sscanf(buf, "%x", &alrm) != 1)
+               return count;
+       hours = (alrm >> 8) & 0x001f;
+       minutes = (alrm >> 0) & 0x003f;
+       if ((hours < 24 && minutes < 60) || (hours == 24 && minutes == 60)) {
+               /*
+                * OK, the time format for the alarm is valid (including the
+                * disabling values)
+                */
+               /* Keeps the RTC watchdog status */
+               chmar = retu_read_reg(RETU_REG_RTCHMAR) & 0x6000;
+               chmar |= alrm & 0x1f3f; /* Stores the requested alarm */
+               retu_rtc_barrier();
+               retu_write_reg(RETU_REG_RTCHMAR, chmar);
+               /* If the alarm is being disabled */
+               if (hours == 24 && minutes == 60) {
+                       /* disable the interrupt */
+                       retu_disable_irq(RETU_INT_RTCA);
+                       retu_rtc_alarm_expired = 0;
+               } else
+                       /* enable the interrupt */
+                       retu_enable_irq(RETU_INT_RTCA);
+       }
+       mutex_unlock(&retu_rtc_mutex);
+
+       return count;
+}
+
+static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, retu_rtc_alarm_show,
+                  retu_rtc_alarm_store);
+
+static ssize_t retu_rtc_alarm_expired_show(struct device *dev, struct device_attribute *attr,
+                                          char *buf)
+{
+       ssize_t retval;
+
+       retval = sprintf(buf, "%u\n", retu_rtc_alarm_expired);
+
+       return retval;
+}
+
+static ssize_t retu_rtc_alarm_expired_store(struct device *dev, struct device_attribute *attr,
+                                           const char *buf, size_t count)
+{
+       retu_rtc_alarm_expired = 0;
+
+       return count;
+}
+
+static DEVICE_ATTR(alarm_expired, S_IRUGO | S_IWUSR, retu_rtc_alarm_expired_show,
+                  retu_rtc_alarm_expired_store);
+
+
+static ssize_t retu_rtc_cal_show(struct device *dev, struct device_attribute *attr,
+                                char *buf)
+{
+       u16 rtccalr1;
+
+       mutex_lock(&retu_rtc_mutex);
+       rtccalr1 = retu_read_reg(RETU_REG_RTCCALR);
+       mutex_unlock(&retu_rtc_mutex);
+
+       /*
+        * Shows the status of the Calibration Register.
+        *
+        * Default, after power loss: 0x0000
+        * Default, for R&D: 0x00C0
+        * Default, for factory: 0x00??
+        *
+        */
+       return sprintf(buf, "0x%04x\n", rtccalr1 & 0x00ff);
+}
+
+static ssize_t retu_rtc_cal_store(struct device *dev, struct device_attribute *attr,
+                                 const char *buf, size_t count)
+{
+       unsigned calibration_value;
+
+       if (sscanf(buf, "%x", &calibration_value) != 1)
+               return count;
+
+       mutex_lock(&retu_rtc_mutex);
+       retu_rtc_barrier();
+       retu_write_reg(RETU_REG_RTCCALR, calibration_value & 0x00ff);
+       mutex_unlock(&retu_rtc_mutex);
+
+       return count;
+}
+
+static DEVICE_ATTR(cal, S_IRUGO | S_IWUSR, retu_rtc_cal_show,
+                  retu_rtc_cal_store);
+
+static struct platform_device retu_rtc_device;
+
+static void retu_rtca_disable(void)
+{
+       retu_disable_irq(RETU_INT_RTCA);
+       retu_rtc_alarm_expired = 1;
+       retu_rtc_barrier();
+       retu_write_reg(RETU_REG_RTCHMAR, (24 << 8) | 60);
+}
+
+static void retu_rtca_expired(struct work_struct *unused)
+{
+       retu_rtca_disable();
+       sysfs_notify(&retu_rtc_device.dev.kobj, NULL, "alarm_expired");
+}
+
+DECLARE_WORK(retu_rtca_work, retu_rtca_expired);
+
+/*
+ * RTCHMR RTCHMAR RTCCAL must be accessed within 0.9 s since the seconds
+ * interrupt has been signaled in the IDR register
+ */
+static void retu_rtcs_interrupt(unsigned long unused)
+{
+       retu_ack_irq(RETU_INT_RTCS);
+       complete_all(&retu_rtc_sync);
+}
+
+static void retu_rtca_interrupt(unsigned long unused)
+{
+       retu_ack_irq(RETU_INT_RTCA);
+       schedule_work(&retu_rtca_work);
+}
+
+static int retu_rtc_init_irq(void)
+{
+       int ret;
+
+       ret = retu_request_irq(RETU_INT_RTCS, retu_rtcs_interrupt, 0, "RTCS");
+       if (ret != 0)
+               return ret;
+       /*
+        * We will take care of enabling and disabling the interrupt
+        * elsewhere, so leave it off by default..
+        */
+       retu_disable_irq(RETU_INT_RTCS);
+
+       ret = retu_request_irq(RETU_INT_RTCA, retu_rtca_interrupt, 0, "RTCA");
+       if (ret != 0) {
+               retu_free_irq(RETU_INT_RTCS);
+               return ret;
+       }
+       retu_disable_irq(RETU_INT_RTCA);
+
+       return 0;
+}
+
+
+static int __devinit retu_rtc_probe(struct device *dev)
+{
+       int r;
+
+       retu_rtc_alarm_expired = retu_read_reg(RETU_REG_IDR) &
+                                              (0x1 << RETU_INT_RTCA);
+
+       if ((r = retu_rtc_init_irq()) != 0)
+               return r;
+
+       mutex_init(&retu_rtc_mutex);
+
+       /* If the calibration register is zero, we've probably lost
+        * power */
+       if (retu_read_reg(RETU_REG_RTCCALR) & 0x00ff)
+               retu_rtc_reset_occurred = 0;
+       else
+               retu_rtc_do_reset();
+
+       if ((r = device_create_file(dev, &dev_attr_time)) != 0)
+               return r;
+       else if ((r = device_create_file(dev, &dev_attr_reset)) != 0)
+               goto err_unregister_time;
+       else if ((r = device_create_file(dev, &dev_attr_alarm)) != 0)
+               goto err_unregister_reset;
+       else if ((r = device_create_file(dev, &dev_attr_alarm_expired)) != 0)
+               goto err_unregister_alarm;
+       else if ((r = device_create_file(dev, &dev_attr_cal)) != 0)
+               goto err_unregister_alarm_expired;
+       else
+               return r;
+
+err_unregister_alarm_expired:
+       device_remove_file(dev, &dev_attr_alarm_expired);
+err_unregister_alarm:
+       device_remove_file(dev, &dev_attr_alarm);
+err_unregister_reset:
+       device_remove_file(dev, &dev_attr_reset);
+err_unregister_time:
+       device_remove_file(dev, &dev_attr_time);
+       return r;
+}
+
+static int __devexit retu_rtc_remove(struct device *dev)
+{
+       retu_disable_irq(RETU_INT_RTCS);
+       retu_free_irq(RETU_INT_RTCS);
+       retu_free_irq(RETU_INT_RTCA);
+       device_remove_file(dev, &dev_attr_cal);
+       device_remove_file(dev, &dev_attr_alarm_expired);
+       device_remove_file(dev, &dev_attr_alarm);
+       device_remove_file(dev, &dev_attr_reset);
+       device_remove_file(dev, &dev_attr_time);
+       return 0;
+}
+
+static struct device_driver retu_rtc_driver = {
+       .name           = "retu-rtc",
+       .bus            = &platform_bus_type,
+       .probe          = retu_rtc_probe,
+       .remove         = __devexit_p(retu_rtc_remove),
+};
+
+static struct platform_device retu_rtc_device = {
+       .name           = "retu-rtc",
+       .id             = -1,
+       .dev            = {
+               .release        = retu_rtc_device_release,
+       },
+};
+
+/* This function provides syncronization with the RTCS interrupt handler */
+static void retu_rtc_barrier(void)
+{
+       INIT_COMPLETION(retu_rtc_sync);
+       retu_ack_irq(RETU_INT_RTCS);
+       retu_enable_irq(RETU_INT_RTCS);
+       wait_for_completion(&retu_rtc_sync);
+       retu_disable_irq(RETU_INT_RTCS);
+}
+
+static int __init retu_rtc_init(void)
+{
+       int ret;
+
+       init_completion(&retu_rtc_exited);
+
+       if ((ret = driver_register(&retu_rtc_driver)) != 0)
+               return ret;
+
+       if ((ret = platform_device_register(&retu_rtc_device)) != 0)
+               goto err_unregister_driver;
+
+       return 0;
+
+err_unregister_driver:
+       driver_unregister(&retu_rtc_driver);
+       return ret;
+}
+
+static void __exit retu_rtc_exit(void)
+{
+       platform_device_unregister(&retu_rtc_device);
+       driver_unregister(&retu_rtc_driver);
+
+       wait_for_completion(&retu_rtc_exited);
+}
+
+module_init(retu_rtc_init);
+module_exit(retu_rtc_exit);
+
+MODULE_DESCRIPTION("Retu RTC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Paul Mundt and Igor Stoppa");
diff --git a/drivers/cbus/retu-user.c b/drivers/cbus/retu-user.c
new file mode 100644 (file)
index 0000000..74a7d61
--- /dev/null
@@ -0,0 +1,423 @@
+/**
+ * drivers/cbus/retu-user.c
+ *
+ * Retu user space interface functions
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+#include <asm/uaccess.h>
+
+#include "retu.h"
+
+#include "user_retu_tahvo.h"
+
+/* Maximum size of IRQ node buffer/pool */
+#define RETU_MAX_IRQ_BUF_LEN   16
+
+#define PFX                    "retu-user: "
+
+/* Bitmap for marking the interrupt sources as having the handlers */
+static u32 retu_irq_bits;
+
+/* For allowing only one user process to subscribe to the retu interrupts */
+static struct file *retu_irq_subscr = NULL;
+
+/* For poll and IRQ passing */
+struct retu_irq {
+       u32 id;
+       struct list_head node;
+};
+
+static spinlock_t retu_irqs_lock;
+static struct retu_irq *retu_irq_block;
+static LIST_HEAD(retu_irqs);
+static LIST_HEAD(retu_irqs_reserve);
+
+/* Wait queue - used when user wants to read the device */
+DECLARE_WAIT_QUEUE_HEAD(retu_user_waitqueue);
+
+/* Semaphore to protect irq subscription sequence */
+static struct mutex retu_mutex;
+
+/* This array specifies RETU register types (read/write/toggle) */
+static const u8 retu_access_bits[] = {
+       1,
+       4,
+       3,
+       3,
+       1,
+       3,
+       3,
+       0,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       4,
+       4,
+       3,
+       0,
+       0,
+       0,
+       0,
+       1,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3
+};
+
+/*
+ * The handler for all RETU interrupts.
+ *
+ * arg is the interrupt source in RETU.
+ */
+static void retu_user_irq_handler(unsigned long arg)
+{
+       struct retu_irq *irq;
+
+       retu_ack_irq(arg);
+
+       spin_lock(&retu_irqs_lock);
+       if (list_empty(&retu_irqs_reserve)) {
+               spin_unlock(&retu_irqs_lock);
+               return;
+       }
+       irq = list_entry((&retu_irqs_reserve)->next, struct retu_irq, node);
+       irq->id = arg;
+       list_move_tail(&irq->node, &retu_irqs);
+       spin_unlock(&retu_irqs_lock);
+
+       /* wake up waiting thread */
+       wake_up(&retu_user_waitqueue);
+}
+
+/*
+ * This routine sets up the interrupt handler and marks an interrupt source
+ * in RETU as a candidate for signal delivery to the user process.
+ */
+static int retu_user_subscribe_to_irq(int id, struct file *filp)
+{
+       int ret;
+
+       mutex_lock(&retu_mutex);
+       if ((retu_irq_subscr != NULL) && (retu_irq_subscr != filp)) {
+               mutex_unlock(&retu_mutex);
+               return -EBUSY;
+       }
+       /* Store the file pointer of the first user process registering IRQs */
+       retu_irq_subscr = filp;
+       mutex_unlock(&retu_mutex);
+
+       if (retu_irq_bits & (1 << id))
+               return 0;
+
+       ret = retu_request_irq(id, retu_user_irq_handler, id, "");
+       if (ret < 0)
+               return ret;
+
+       /* Mark that this interrupt has a handler */
+       retu_irq_bits |= 1 << id;
+
+       return 0;
+}
+
+/*
+ * Unregisters all RETU interrupt handlers.
+ */
+static void retu_unreg_irq_handlers(void)
+{
+       int id;
+
+       if (!retu_irq_bits)
+               return;
+
+       for (id = 0; id < MAX_RETU_IRQ_HANDLERS; id++)
+               if (retu_irq_bits & (1 << id))
+                       retu_free_irq(id);
+
+       retu_irq_bits = 0;
+}
+
+/*
+ * Write to RETU register.
+ * Returns 0 upon success, a negative error value otherwise.
+ */
+static int retu_user_write_with_mask(u32 field, u16 value)
+{
+       u32 mask;
+       u32 reg;
+       u_short tmp;
+       unsigned long flags;
+
+       mask = MASK(field);
+       reg = REG(field);
+
+       /* Detect bad mask and reg */
+       if (mask == 0 || reg > RETU_REG_MAX ||
+           retu_access_bits[reg] == READ_ONLY) {
+               printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
+                      reg, mask);
+               return -EINVAL;
+       }
+
+       /* Justify value according to mask */
+       while (!(mask & 1)) {
+               value = value << 1;
+               mask = mask >> 1;
+       }
+
+       spin_lock_irqsave(&retu_lock, flags);
+       if (retu_access_bits[reg] == TOGGLE) {
+               /* No need to detect previous content of register */
+               tmp = 0;
+       } else {
+               /* Read current value of register */
+               tmp = retu_read_reg(reg);
+       }
+
+       /* Generate new value */
+       tmp = (tmp & ~MASK(field)) | (value & MASK(field));
+       /* Write data to RETU */
+       retu_write_reg(reg, tmp);
+       spin_unlock_irqrestore(&retu_lock, flags);
+
+       return 0;
+}
+
+/*
+ * Read RETU register.
+ */
+static u32 retu_user_read_with_mask(u32 field)
+{
+       u_short value;
+       u32 mask, reg;
+
+       mask = MASK(field);
+       reg = REG(field);
+
+       /* Detect bad mask and reg */
+       if (mask == 0 || reg > RETU_REG_MAX) {
+               printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
+                      reg, mask);
+               return -EINVAL;
+       }
+
+       /* Read the register */
+       value = retu_read_reg(reg) & mask;
+
+       /* Right justify value */
+       while (!(mask & 1)) {
+               value = value >> 1;
+               mask = mask >> 1;
+       }
+
+       return value;
+}
+
+/*
+ * Close device
+ */
+static int retu_close(struct inode *inode, struct file *filp)
+{
+       /* Unregister all interrupts that have been registered */
+       if (retu_irq_subscr == filp) {
+               retu_unreg_irq_handlers();
+               retu_irq_subscr = NULL;
+       }
+
+       return 0;
+}
+
+/*
+ * Device control (ioctl)
+ */
+static int retu_ioctl(struct inode *inode, struct file *filp,
+                     unsigned int cmd, unsigned long arg)
+{
+       struct retu_tahvo_write_parms par;
+       int ret;
+
+       switch (cmd) {
+       case URT_IOCT_IRQ_SUBSCR:
+               return retu_user_subscribe_to_irq(arg, filp);
+       case RETU_IOCH_READ:
+               return retu_user_read_with_mask(arg);
+       case RETU_IOCX_WRITE:
+               ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
+               if (ret)
+                       printk(KERN_ERR "copy_from_user failed: %d\n", ret);
+               par.result = retu_user_write_with_mask(par.field, par.value);
+               ret = copy_to_user((void __user *) arg, &par, sizeof(par));
+               if (ret)
+                       printk(KERN_ERR "copy_to_user failed: %d\n", ret);
+               break;
+       case RETU_IOCH_ADC_READ:
+               return retu_read_adc(arg);
+       default:
+               return -ENOIOCTLCMD;
+       }
+       return 0;
+}
+
+/*
+ * Read from device
+ */
+static ssize_t retu_read(struct file *filp, char *buf, size_t count,
+                        loff_t * offp)
+{
+       struct retu_irq *irq;
+
+       u32 nr, i;
+
+       /* read not permitted if neither filp nor anyone has registered IRQs */
+       if (retu_irq_subscr != filp)
+               return -EPERM;
+
+       if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
+               return -EINVAL;
+
+       nr = count / sizeof(u32);
+
+       for (i = 0; i < nr; i++) {
+               unsigned long flags;
+               u32 irq_id;
+               int ret;
+
+               ret = wait_event_interruptible(retu_user_waitqueue,
+                                              !list_empty(&retu_irqs));
+               if (ret < 0)
+                       return ret;
+
+               spin_lock_irqsave(&retu_irqs_lock, flags);
+               irq = list_entry((&retu_irqs)->next, struct retu_irq, node);
+               irq_id = irq->id;
+               list_move(&irq->node, &retu_irqs_reserve);
+               spin_unlock_irqrestore(&retu_irqs_lock, flags);
+
+               ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
+                                  sizeof(irq_id));
+               if (ret)
+                       printk(KERN_ERR "copy_to_user failed: %d\n", ret);
+       }
+
+       return count;
+}
+
+/*
+ * Poll method
+ */
+static unsigned retu_poll(struct file *filp, struct poll_table_struct *pt)
+{
+       if (!list_empty(&retu_irqs))
+               return POLLIN;
+
+       poll_wait(filp, &retu_user_waitqueue, pt);
+
+       if (!list_empty(&retu_irqs))
+               return POLLIN;
+       else
+               return 0;
+}
+
+static struct file_operations retu_user_fileops = {
+       .owner = THIS_MODULE,
+       .ioctl = retu_ioctl,
+       .read = retu_read,
+       .release = retu_close,
+       .poll = retu_poll
+};
+
+static struct miscdevice retu_device = {
+       .minor = MISC_DYNAMIC_MINOR,
+       .name = "retu",
+       .fops = &retu_user_fileops
+};
+
+/*
+ * Initialization
+ *
+ * @return 0 if successful, error value otherwise.
+ */
+int retu_user_init(void)
+{
+       struct retu_irq *irq;
+       int res, i;
+
+       irq = kmalloc(sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN, GFP_KERNEL);
+       if (irq == NULL) {
+               printk(KERN_ERR PFX "kmalloc failed\n");
+               return -ENOMEM;
+       }
+       memset(irq, 0, sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN);
+       for (i = 0; i < RETU_MAX_IRQ_BUF_LEN; i++)
+               list_add(&irq[i].node, &retu_irqs_reserve);
+
+       retu_irq_block = irq;
+
+       spin_lock_init(&retu_irqs_lock);
+       mutex_init(&retu_mutex);
+
+       /* Request a misc device */
+       res = misc_register(&retu_device);
+       if (res < 0) {
+               printk(KERN_ERR PFX "unable to register misc device for %s\n",
+                      retu_device.name);
+               kfree(irq);
+               return res;
+       }
+
+       return 0;
+}
+
+/*
+ * Cleanup.
+ */
+void retu_user_cleanup(void)
+{
+       /* Unregister our misc device */
+       misc_deregister(&retu_device);
+       /* Unregister and disable all RETU interrupts used by this module */
+       retu_unreg_irq_handlers();
+       kfree(retu_irq_block);
+}
+
+MODULE_DESCRIPTION("Retu ASIC user space functions");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mikko Ylinen");
diff --git a/drivers/cbus/retu-wdt.c b/drivers/cbus/retu-wdt.c
new file mode 100644 (file)
index 0000000..b7b20b7
--- /dev/null
@@ -0,0 +1,202 @@
+/**
+ * drivers/cbus/retu-wdt.c
+ *
+ * Driver for Retu watchdog
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Amit Kucheria <amit.kucheria@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+
+#include "cbus.h"
+#include "retu.h"
+
+/* Watchdog timeout in seconds */
+#define RETU_WDT_MIN_TIMER 0
+#define RETU_WDT_DEFAULT_TIMER 32
+#define RETU_WDT_MAX_TIMER 63
+
+static struct completion retu_wdt_completion;
+static DEFINE_MUTEX(retu_wdt_mutex);
+
+/* Current period of watchdog */
+static unsigned int period_val = RETU_WDT_DEFAULT_TIMER;
+static int counter_param = RETU_WDT_MAX_TIMER;
+
+static int retu_modify_counter(unsigned int new)
+{
+       int ret = 0;
+
+       if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
+               return -EINVAL;
+
+       mutex_lock(&retu_wdt_mutex);
+
+       period_val = new;
+       retu_write_reg(RETU_REG_WATCHDOG, (u16)period_val);
+
+       mutex_unlock(&retu_wdt_mutex);
+       return ret;
+}
+
+static ssize_t retu_wdt_period_show(struct device *dev,
+                               struct device_attribute *attr, char *buf)
+{
+       /* Show current max counter */
+       return sprintf(buf, "%u\n", (u16)period_val);
+}
+
+static ssize_t retu_wdt_period_store(struct device *dev,
+                               struct device_attribute *attr,
+                               const char *buf, size_t count)
+{
+       unsigned int new_period;
+       int ret;
+
+       if (sscanf(buf, "%u", &new_period) != 1) {
+               printk(KERN_ALERT "retu_wdt_period_store: Invalid input\n");
+               return -EINVAL;
+       }
+
+       ret = retu_modify_counter(new_period);
+       if (ret < 0)
+               return ret;
+
+       return strnlen(buf, count);
+}
+
+static ssize_t retu_wdt_counter_show(struct device *dev,
+                               struct device_attribute *attr, char *buf)
+{
+       u16 counter;
+
+       /* Show current value in watchdog counter */
+       counter = retu_read_reg(RETU_REG_WATCHDOG);
+
+       /* Only the 5 LSB are important */
+       return snprintf(buf, PAGE_SIZE, "%u\n", (counter & 0x3F));
+}
+
+static DEVICE_ATTR(period, S_IRUGO | S_IWUSR, retu_wdt_period_show, \
+                       retu_wdt_period_store);
+static DEVICE_ATTR(counter, S_IRUGO, retu_wdt_counter_show, NULL);
+
+static int __devinit retu_wdt_probe(struct device *dev)
+{
+       int ret;
+
+       ret = device_create_file(dev, &dev_attr_period);
+       if (ret) {
+               printk(KERN_ERR "retu_wdt_probe: Error creating "
+                                       "sys device file: period\n");
+               return ret;
+       }
+
+       ret = device_create_file(dev, &dev_attr_counter);
+       if (ret) {
+               device_remove_file(dev, &dev_attr_period);
+               printk(KERN_ERR "retu_wdt_probe: Error creating "
+                                       "sys device file: counter\n");
+       }
+
+       return ret;
+}
+
+static int __devexit retu_wdt_remove(struct device *dev)
+{
+       device_remove_file(dev, &dev_attr_period);
+       device_remove_file(dev, &dev_attr_counter);
+       return 0;
+}
+
+static void retu_wdt_device_release(struct device *dev)
+{
+       complete(&retu_wdt_completion);
+}
+
+static struct platform_device retu_wdt_device = {
+       .name = "retu-watchdog",
+       .id = -1,
+       .dev = {
+               .release = retu_wdt_device_release,
+       },
+};
+
+static struct device_driver retu_wdt_driver = {
+       .name = "retu-watchdog",
+       .bus = &platform_bus_type,
+       .probe = retu_wdt_probe,
+       .remove = __devexit_p(retu_wdt_remove),
+};
+
+static int __init retu_wdt_init(void)
+{
+       int ret;
+
+       init_completion(&retu_wdt_completion);
+
+       ret = driver_register(&retu_wdt_driver);
+       if (ret)
+               return ret;
+
+       ret = platform_device_register(&retu_wdt_device);
+       if (ret)
+               goto exit1;
+
+       /* passed as module parameter? */
+       ret = retu_modify_counter(counter_param);
+       if (ret == -EINVAL) {
+               ret = retu_modify_counter(RETU_WDT_DEFAULT_TIMER);
+               printk(KERN_INFO
+                      "retu_wdt_init: Intializing to default value\n");
+       }
+
+       printk(KERN_INFO "Retu watchdog driver initialized\n");
+       return ret;
+
+exit1:
+       driver_unregister(&retu_wdt_driver);
+       wait_for_completion(&retu_wdt_completion);
+
+       return ret;
+}
+
+static void __exit retu_wdt_exit(void)
+{
+       platform_device_unregister(&retu_wdt_device);
+       driver_unregister(&retu_wdt_driver);
+
+       wait_for_completion(&retu_wdt_completion);
+}
+
+module_init(retu_wdt_init);
+module_exit(retu_wdt_exit);
+module_param(counter_param, int, 0);
+
+MODULE_DESCRIPTION("Retu WatchDog");
+MODULE_AUTHOR("Amit Kucheria");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/cbus/retu.c b/drivers/cbus/retu.c
new file mode 100644 (file)
index 0000000..84d7840
--- /dev/null
@@ -0,0 +1,467 @@
+/**
+ * drivers/cbus/retu.c
+ *
+ * Support functions for Retu ASIC
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
+ *           David Weinehall <david.weinehall@nokia.com>, and
+ *           Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/uaccess.h>
+
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/board-nokia.h>
+
+#include "cbus.h"
+#include "retu.h"
+
+#define RETU_ID                        0x01
+#define PFX                    "retu: "
+
+static int retu_initialized;
+static int retu_irq_pin;
+static int retu_is_vilma;
+
+static struct tasklet_struct retu_tasklet;
+spinlock_t retu_lock = SPIN_LOCK_UNLOCKED;
+
+static struct completion device_release;
+
+struct retu_irq_handler_desc {
+       int (*func)(unsigned long);
+       unsigned long arg;
+       char name[8];
+};
+
+static struct retu_irq_handler_desc retu_irq_handlers[MAX_RETU_IRQ_HANDLERS];
+
+/**
+ * retu_read_reg - Read a value from a register in Retu
+ * @reg: the register to read from
+ *
+ * This function returns the contents of the specified register
+ */
+int retu_read_reg(int reg)
+{
+       BUG_ON(!retu_initialized);
+       return cbus_read_reg(cbus_host, RETU_ID, reg);
+}
+
+/**
+ * retu_write_reg - Write a value to a register in Retu
+ * @reg: the register to write to
+ * @reg: the value to write to the register
+ *
+ * This function writes a value to the specified register
+ */
+void retu_write_reg(int reg, u16 val)
+{
+       BUG_ON(!retu_initialized);
+       cbus_write_reg(cbus_host, RETU_ID, reg, val);
+}
+
+void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
+{
+       unsigned long flags;
+       u16 w;
+
+       spin_lock_irqsave(&retu_lock, flags);
+       w = retu_read_reg(reg);
+       w &= ~clear;
+       w |= set;
+       retu_write_reg(reg, w);
+       spin_unlock_irqrestore(&retu_lock, flags);
+}
+
+#define ADC_MAX_CHAN_NUMBER    13
+
+int retu_read_adc(int channel)
+{
+       unsigned long flags;
+       int res;
+
+       if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
+               return -EINVAL;
+
+       spin_lock_irqsave(&retu_lock, flags);
+
+       if ((channel == 8) && retu_is_vilma) {
+               int scr = retu_read_reg(RETU_REG_ADCSCR);
+               int ch = (retu_read_reg(RETU_REG_ADCR) >> 10) & 0xf;
+               if (((scr & 0xff) != 0) && (ch != 8))
+                       retu_write_reg (RETU_REG_ADCSCR, (scr & ~0xff));
+       }
+
+       /* Select the channel and read result */
+       retu_write_reg(RETU_REG_ADCR, channel << 10);
+       res = retu_read_reg(RETU_REG_ADCR) & 0x3ff;
+
+       if (retu_is_vilma)
+               retu_write_reg(RETU_REG_ADCR, (1 << 13));
+
+       /* Unlock retu */
+       spin_unlock_irqrestore(&retu_lock, flags);
+
+       return res;
+}
+
+
+static u16 retu_disable_bogus_irqs(u16 mask)
+{
+       int i;
+
+       for (i = 0; i < MAX_RETU_IRQ_HANDLERS; i++) {
+               if (mask & (1 << i))
+                       continue;
+               if (retu_irq_handlers[i].func != NULL)
+                       continue;
+               /* an IRQ was enabled but we don't have a handler for it */
+               printk(KERN_INFO PFX "disabling bogus IRQ %d\n", i);
+               mask |= (1 << i);
+       }
+       return mask;
+}
+
+/*
+ * Disable given RETU interrupt
+ */
+void retu_disable_irq(int id)
+{
+       unsigned long flags;
+       u16 mask;
+
+       spin_lock_irqsave(&retu_lock, flags);
+       mask = retu_read_reg(RETU_REG_IMR);
+       mask |= 1 << id;
+       mask = retu_disable_bogus_irqs(mask);
+       retu_write_reg(RETU_REG_IMR, mask);
+       spin_unlock_irqrestore(&retu_lock, flags);
+}
+
+/*
+ * Enable given RETU interrupt
+ */
+void retu_enable_irq(int id)
+{
+       unsigned long flags;
+       u16 mask;
+
+       if (id == 3) {
+               printk("Enabling Retu IRQ %d\n", id);
+               dump_stack();
+       }
+       spin_lock_irqsave(&retu_lock, flags);
+       mask = retu_read_reg(RETU_REG_IMR);
+       mask &= ~(1 << id);
+       mask = retu_disable_bogus_irqs(mask);
+       retu_write_reg(RETU_REG_IMR, mask);
+       spin_unlock_irqrestore(&retu_lock, flags);
+}
+
+/*
+ * Acknowledge given RETU interrupt
+ */
+void retu_ack_irq(int id)
+{
+       retu_write_reg(RETU_REG_IDR, 1 << id);
+}
+
+/*
+ * RETU interrupt handler. Only schedules the tasklet.
+ */
+static irqreturn_t retu_irq_handler(int irq, void *dev_id)
+{
+       tasklet_schedule(&retu_tasklet);
+       return IRQ_HANDLED;
+}
+
+/*
+ * Tasklet handler
+ */
+static void retu_tasklet_handler(unsigned long data)
+{
+       struct retu_irq_handler_desc *hnd;
+       u16 id;
+       u16 im;
+       int i;
+
+       for (;;) {
+               id = retu_read_reg(RETU_REG_IDR);
+               im = ~retu_read_reg(RETU_REG_IMR);
+               id &= im;
+
+               if (!id)
+                       break;
+
+               for (i = 0; id != 0; i++, id >>= 1) {
+                       if (!(id & 1))
+                               continue;
+                       hnd = &retu_irq_handlers[i];
+                       if (hnd->func == NULL) {
+                               /* Spurious retu interrupt - disable and ack it */
+                               printk(KERN_INFO "Spurious Retu interrupt "
+                                                "(id %d)\n", i);
+                               retu_disable_irq(i);
+                               retu_ack_irq(i);
+                               continue;
+                       }
+                       hnd->func(hnd->arg);
+                       /*
+                        * Don't acknowledge the interrupt here
+                        * It must be done explicitly
+                        */
+               }
+       }
+}
+
+/*
+ * Register the handler for a given RETU interrupt source.
+ */
+int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
+{
+       struct retu_irq_handler_desc *hnd;
+
+       if (irq_handler == NULL || id >= MAX_RETU_IRQ_HANDLERS ||
+           name == NULL) {
+               printk(KERN_ERR PFX "Invalid arguments to %s\n",
+                      __FUNCTION__);
+               return -EINVAL;
+       }
+       hnd = &retu_irq_handlers[id];
+       if (hnd->func != NULL) {
+               printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
+               return -EBUSY;
+       }
+       printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
+              id, name);
+       hnd->func = irq_handler;
+       hnd->arg = arg;
+       strlcpy(hnd->name, name, sizeof(hnd->name));
+
+       retu_ack_irq(id);
+       retu_enable_irq(id);
+
+       return 0;
+}
+
+/*
+ * Unregister the handler for a given RETU interrupt source.
+ */
+void retu_free_irq(int id)
+{
+       struct retu_irq_handler_desc *hnd;
+
+       if (id >= MAX_RETU_IRQ_HANDLERS) {
+               printk(KERN_ERR PFX "Invalid argument to %s\n",
+                      __FUNCTION__);
+               return;
+       }
+       hnd = &retu_irq_handlers[id];
+       if (hnd->func == NULL) {
+               printk(KERN_ERR PFX "IRQ %d already freed\n", id);
+               return;
+       }
+
+       retu_disable_irq(id);
+       hnd->func = NULL;
+}
+
+/**
+ * retu_power_off - Shut down power to system
+ *
+ * This function puts the system in power off state
+ */
+static void retu_power_off(void)
+{
+       /* Ignore power button state */
+       retu_write_reg(RETU_REG_CC1, retu_read_reg(RETU_REG_CC1) | 2);
+       /* Expire watchdog immediately */
+       retu_write_reg(RETU_REG_WATCHDOG, 0);
+       /* Wait for poweroff*/
+       for (;;);
+}
+
+/**
+ * retu_probe - Probe for Retu ASIC
+ * @dev: the Retu device
+ *
+ * Probe for the Retu ASIC and allocate memory
+ * for its device-struct if found
+ */
+static int __devinit retu_probe(struct device *dev)
+{
+       const struct omap_em_asic_bb5_config * em_asic_config;
+       int rev, ret;
+
+       /* Prepare tasklet */
+       tasklet_init(&retu_tasklet, retu_tasklet_handler, 0);
+
+       em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
+                                        struct omap_em_asic_bb5_config);
+       if (em_asic_config == NULL) {
+               printk(KERN_ERR PFX "Unable to retrieve config data\n");
+               return -ENODATA;
+       }
+
+       retu_irq_pin = em_asic_config->retu_irq_gpio;
+
+       if ((ret = gpio_request(retu_irq_pin, "RETU irq")) < 0) {
+               printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
+               return ret;
+       }
+
+       /* Set the pin as input */
+       gpio_direction_input(retu_irq_pin);
+
+       /* Rising edge triggers the IRQ */
+       set_irq_type(gpio_to_irq(retu_irq_pin), IRQ_TYPE_EDGE_RISING);
+
+       retu_initialized = 1;
+
+       rev = retu_read_reg(RETU_REG_ASICR) & 0xff;
+       if (rev & (1 << 7))
+               retu_is_vilma = 1;
+
+       printk(KERN_INFO "%s v%d.%d found\n", retu_is_vilma ? "Vilma" : "Retu",
+              (rev >> 4) & 0x07, rev & 0x0f);
+
+       /* Mask all RETU interrupts */
+       retu_write_reg(RETU_REG_IMR, 0xffff);
+
+       ret = request_irq(gpio_to_irq(retu_irq_pin), retu_irq_handler, 0,
+                         "retu", 0);
+       if (ret < 0) {
+               printk(KERN_ERR PFX "Unable to register IRQ handler\n");
+               gpio_free(retu_irq_pin);
+               return ret;
+       }
+       set_irq_wake(gpio_to_irq(retu_irq_pin), 1);
+
+       /* Register power off function */
+       pm_power_off = retu_power_off;
+
+#ifdef CONFIG_CBUS_RETU_USER
+       /* Initialize user-space interface */
+       if (retu_user_init() < 0) {
+               printk(KERN_ERR "Unable to initialize driver\n");
+               free_irq(gpio_to_irq(retu_irq_pin), 0);
+               gpio_free(retu_irq_pin);
+               return ret;
+       }
+#endif
+
+       return 0;
+}
+
+static int retu_remove(struct device *dev)
+{
+#ifdef CONFIG_CBUS_RETU_USER
+       retu_user_cleanup();
+#endif
+       /* Mask all RETU interrupts */
+       retu_write_reg(RETU_REG_IMR, 0xffff);
+       free_irq(gpio_to_irq(retu_irq_pin), 0);
+       gpio_free(retu_irq_pin);
+       tasklet_kill(&retu_tasklet);
+
+       return 0;
+}
+
+static void retu_device_release(struct device *dev)
+{
+       complete(&device_release);
+}
+
+static struct device_driver retu_driver = {
+       .name           = "retu",
+       .bus            = &platform_bus_type,
+       .probe          = retu_probe,
+       .remove         = retu_remove,
+};
+
+static struct platform_device retu_device = {
+       .name           = "retu",
+       .id             = -1,
+       .dev = {
+               .release = retu_device_release,
+       }
+};
+
+/**
+ * retu_init - initialise Retu driver
+ *
+ * Initialise the Retu driver and return 0 if everything worked ok
+ */
+static int __init retu_init(void)
+{
+       int ret = 0;
+
+       printk(KERN_INFO "Retu/Vilma driver initialising\n");
+
+       init_completion(&device_release);
+
+       if ((ret = driver_register(&retu_driver)) < 0)
+               return ret;
+
+       if ((ret = platform_device_register(&retu_device)) < 0) {
+               driver_unregister(&retu_driver);
+               return ret;
+       }
+       return 0;
+}
+
+/*
+ * Cleanup
+ */
+static void __exit retu_exit(void)
+{
+       platform_device_unregister(&retu_device);
+       driver_unregister(&retu_driver);
+       wait_for_completion(&device_release);
+}
+
+EXPORT_SYMBOL(retu_request_irq);
+EXPORT_SYMBOL(retu_free_irq);
+EXPORT_SYMBOL(retu_enable_irq);
+EXPORT_SYMBOL(retu_disable_irq);
+EXPORT_SYMBOL(retu_ack_irq);
+EXPORT_SYMBOL(retu_read_reg);
+EXPORT_SYMBOL(retu_write_reg);
+
+subsys_initcall(retu_init);
+module_exit(retu_exit);
+
+MODULE_DESCRIPTION("Retu ASIC control");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
diff --git a/drivers/cbus/retu.h b/drivers/cbus/retu.h
new file mode 100644 (file)
index 0000000..c9e044c
--- /dev/null
@@ -0,0 +1,77 @@
+/**
+ * drivers/cbus/retu.h
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
+ *           David Weinehall <david.weinehall@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __DRIVERS_CBUS_RETU_H
+#define __DRIVERS_CBUS_RETU_H
+
+#include <linux/types.h>
+
+/* Registers */
+#define RETU_REG_ASICR         0x00    /* ASIC ID & revision */
+#define RETU_REG_IDR           0x01    /* Interrupt ID */
+#define RETU_REG_IMR           0x02    /* Interrupt mask */
+#define RETU_REG_RTCDSR                0x03    /* RTC seconds register */
+#define RETU_REG_RTCHMR                0x04    /* RTC hours and minutes register */
+#define RETU_REG_RTCHMAR       0x05    /* RTC hours and minutes alarm and time set register */
+#define RETU_REG_RTCCALR       0x06    /* RTC calibration register */
+#define RETU_REG_ADCR          0x08    /* ADC result */
+#define RETU_REG_ADCSCR                0x09    /* ADC sample ctrl */
+#define RETU_REG_CC1           0x0d    /* Common control register 1 */
+#define RETU_REG_CC2           0x0e    /* Common control register 2 */
+#define RETU_REG_CTRL_CLR      0x0f    /* Regulator clear register */
+#define RETU_REG_CTRL_SET      0x10    /* Regulator set register */
+#define RETU_REG_STATUS                0x16    /* Status register */
+#define RETU_REG_WATCHDOG      0x17    /* Watchdog register */
+#define RETU_REG_AUDTXR                0x18    /* Audio Codec Tx register */
+#define RETU_REG_MAX           0x1f
+
+/* Interrupt sources */
+#define RETU_INT_PWR           0
+#define RETU_INT_CHAR          1
+#define RETU_INT_RTCS          2
+#define RETU_INT_RTCM          3
+#define RETU_INT_RTCD          4
+#define RETU_INT_RTCA          5
+#define RETU_INT_HOOK          6
+#define RETU_INT_HEAD          7
+#define RETU_INT_ADCS          8
+
+#define        MAX_RETU_IRQ_HANDLERS   16
+
+int retu_read_reg(int reg);
+void retu_write_reg(int reg, u16 val);
+void retu_set_clear_reg_bits(int reg, u16 set, u16 clear);
+int retu_read_adc(int channel);
+int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
+void retu_free_irq(int id);
+void retu_enable_irq(int id);
+void retu_disable_irq(int id);
+void retu_ack_irq(int id);
+
+#ifdef CONFIG_CBUS_RETU_USER
+int retu_user_init(void);
+void retu_user_cleanup(void);
+#endif
+
+extern spinlock_t retu_lock;
+
+#endif /* __DRIVERS_CBUS_RETU_H */
diff --git a/drivers/cbus/tahvo-usb.c b/drivers/cbus/tahvo-usb.c
new file mode 100644 (file)
index 0000000..d8ad836
--- /dev/null
@@ -0,0 +1,777 @@
+/**
+ * drivers/cbus/tahvo-usb.c
+ *
+ * Tahvo USB transeiver
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Parts copied from drivers/i2c/chips/isp1301_omap.c
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
+ *           Tony Lindgren <tony@atomide.com>, and
+ *           Timo Teräs <timo.teras@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/irq.h>
+#include <mach/usb.h>
+
+#include "cbus.h"
+#include "tahvo.h"
+
+#define DRIVER_NAME     "tahvo-usb"
+
+#define USBR_SLAVE_CONTROL     (1 << 8)
+#define USBR_VPPVIO_SW         (1 << 7)
+#define USBR_SPEED             (1 << 6)
+#define USBR_REGOUT            (1 << 5)
+#define USBR_MASTER_SW2                (1 << 4)
+#define USBR_MASTER_SW1                (1 << 3)
+#define USBR_SLAVE_SW          (1 << 2)
+#define USBR_NSUSPEND          (1 << 1)
+#define USBR_SEMODE            (1 << 0)
+
+/* bits in OTG_CTRL */
+
+/* Bits that are controlled by OMAP OTG and are read-only */
+#define OTG_CTRL_OMAP_MASK     (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
+                               OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
+/* Bits that are controlled by transceiver */
+#define OTG_CTRL_XCVR_MASK     (OTG_ASESSVLD|OTG_BSESSEND|\
+                               OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
+/* Bits that are controlled by system */
+#define OTG_CTRL_SYS_MASK      (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
+                               OTG_B_HNPEN|OTG_BUSDROP)
+
+#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
+#error tahvo-otg.c does not work with OCHI yet!
+#endif
+
+#define TAHVO_MODE_HOST                0
+#define TAHVO_MODE_PERIPHERAL  1
+
+#ifdef CONFIG_USB_OTG
+#define TAHVO_MODE(tu)         (tu)->tahvo_mode
+#elif defined(CONFIG_USB_GADGET_OMAP)
+#define TAHVO_MODE(tu)         TAHVO_MODE_PERIPHERAL
+#else
+#define TAHVO_MODE(tu)         TAHVO_MODE_HOST
+#endif
+
+struct tahvo_usb {
+       struct platform_device *pt_dev;
+       struct otg_transceiver otg;
+       int vbus_state;
+       struct work_struct irq_work;
+       struct mutex serialize;
+#ifdef CONFIG_USB_OTG
+       int tahvo_mode;
+#endif
+};
+static struct platform_device tahvo_usb_device;
+
+/*
+ * ---------------------------------------------------------------------------
+ * OTG related functions
+ *
+ * These shoud be separated into omap-otg.c driver module, as they are used
+ * by various transceivers. These functions are needed in the UDC-only case
+ * as well. These functions are copied from GPL isp1301_omap.c
+ * ---------------------------------------------------------------------------
+ */
+static struct platform_device *tahvo_otg_dev;
+
+static irqreturn_t omap_otg_irq(int irq, void *arg)
+{
+       struct platform_device *otg_dev = (struct platform_device *) arg;
+       struct tahvo_usb *tu = (struct tahvo_usb *) otg_dev->dev.driver_data;
+       u16 otg_irq;
+
+       otg_irq = omap_readw(OTG_IRQ_SRC);
+       if (otg_irq & OPRT_CHG) {
+               omap_writew(OPRT_CHG, OTG_IRQ_SRC);
+       } else if (otg_irq & B_SRP_TMROUT) {
+               omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
+       } else if (otg_irq & B_HNP_FAIL) {
+               omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
+       } else if (otg_irq & A_SRP_DETECT) {
+               omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
+       } else if (otg_irq & A_REQ_TMROUT) {
+               omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
+       } else if (otg_irq & A_VBUS_ERR) {
+               omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
+       } else if (otg_irq & DRIVER_SWITCH) {
+               if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
+                  tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
+                       /* role is host */
+                       usb_bus_start_enum(tu->otg.host,
+                                          tu->otg.host->otg_port);
+               }
+               omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
+       } else
+               return IRQ_NONE;
+
+       return IRQ_HANDLED;
+
+}
+
+static int omap_otg_init(void)
+{
+       u32 l;
+
+#ifdef CONFIG_USB_OTG
+       if (!tahvo_otg_dev) {
+               printk("tahvo-usb: no tahvo_otg_dev\n");
+               return -ENODEV;
+       }
+#endif
+
+       l = omap_readl(OTG_SYSCON_1);
+       l &= ~OTG_IDLE_EN;
+       omap_writel(l, OTG_SYSCON_1);
+       udelay(100);
+
+       /* some of these values are board-specific... */
+       l = omap_readl(OTG_SYSCON_2);
+       l |= OTG_EN
+               /* for B-device: */
+               | SRP_GPDATA            /* 9msec Bdev D+ pulse */
+               | SRP_GPDVBUS           /* discharge after VBUS pulse */
+               // | (3 << 24)          /* 2msec VBUS pulse */
+               /* for A-device: */
+               | (0 << 20)             /* 200ms nominal A_WAIT_VRISE timer */
+               | SRP_DPW               /* detect 167+ns SRP pulses */
+               | SRP_DATA | SRP_VBUS;  /* accept both kinds of SRP pulse */
+       omap_writel(l, OTG_SYSCON_2);
+
+       omap_writew(DRIVER_SWITCH | OPRT_CHG
+                       | B_SRP_TMROUT | B_HNP_FAIL
+                                 | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
+                                       OTG_IRQ_EN);
+       l = omap_readl(OTG_SYSCON_2);
+       l |= OTG_EN;
+       omap_writel(l, OTG_SYSCON_2);
+
+       return 0;
+}
+
+static int omap_otg_probe(struct device *dev)
+{
+       int ret;
+
+       tahvo_otg_dev = to_platform_device(dev);
+       ret = omap_otg_init();
+       if (ret != 0) {
+               printk(KERN_ERR "tahvo-usb: omap_otg_init failed\n");
+               return ret;
+       }
+
+       return request_irq(tahvo_otg_dev->resource[1].start,
+                          omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
+                          &tahvo_usb_device);
+}
+
+static int omap_otg_remove(struct device *dev)
+{
+       free_irq(tahvo_otg_dev->resource[1].start, &tahvo_usb_device);
+       tahvo_otg_dev = NULL;
+
+       return 0;
+}
+
+struct device_driver omap_otg_driver = {
+       .name           = "omap_otg",
+       .bus            = &platform_bus_type,
+       .probe          = omap_otg_probe,
+       .remove         = omap_otg_remove,
+};
+
+/*
+ * ---------------------------------------------------------------------------
+ * Tahvo related functions
+ * These are Nokia proprietary code, except for the OTG register settings,
+ * which are copied from isp1301.c
+ * ---------------------------------------------------------------------------
+ */
+static ssize_t vbus_state_show(struct device *device,
+                              struct device_attribute *attr, char *buf)
+{
+       struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
+       return sprintf(buf, "%d\n", tu->vbus_state);
+}
+static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
+
+int vbus_active = 0;
+
+#if 0
+
+static int host_suspend(struct tahvo_usb *tu)
+{
+       struct device   *dev;
+
+       if (!tu->otg.host)
+               return -ENODEV;
+
+       /* Currently ASSUMES only the OTG port matters;
+        * other ports could be active...
+        */
+       dev = tu->otg.host->controller;
+       return dev->driver->suspend(dev, PMSG_SUSPEND);
+}
+
+static int host_resume(struct tahvo_usb *tu)
+{
+       struct device   *dev;
+
+       if (!tu->otg.host)
+               return -ENODEV;
+
+       dev = tu->otg.host->controller;
+       return dev->driver->resume(dev);
+}
+
+#else
+
+static int host_suspend(struct tahvo_usb *tu)
+{
+       return 0;
+}
+
+static int host_resume(struct tahvo_usb *tu)
+{
+       return 0;
+}
+
+#endif
+
+static void check_vbus_state(struct tahvo_usb *tu)
+{
+       int reg, prev_state;
+
+       reg = tahvo_read_reg(TAHVO_REG_IDSR);
+       if (reg & 0x01) {
+               u32 l;
+
+               vbus_active = 1;
+               switch (tu->otg.state) {
+               case OTG_STATE_B_IDLE:
+                       /* Enable the gadget driver */
+                       if (tu->otg.gadget)
+                               usb_gadget_vbus_connect(tu->otg.gadget);
+                       /* Set B-session valid and not B-sessio ended to indicate
+                        * Vbus to be ok. */
+                       l = omap_readl(OTG_CTRL);
+                       l &= ~OTG_BSESSEND;
+                       l |= OTG_BSESSVLD;
+                       omap_writel(l, OTG_CTRL);
+
+                       tu->otg.state = OTG_STATE_B_PERIPHERAL;
+                       break;
+               case OTG_STATE_A_IDLE:
+                       /* Session is now valid assuming the USB hub is driving Vbus */
+                       tu->otg.state = OTG_STATE_A_HOST;
+                       host_resume(tu);
+                       break;
+               default:
+                       break;
+               }
+               printk("USB cable connected\n");
+       } else {
+               switch (tu->otg.state) {
+               case OTG_STATE_B_PERIPHERAL:
+                       if (tu->otg.gadget)
+                               usb_gadget_vbus_disconnect(tu->otg.gadget);
+                       tu->otg.state = OTG_STATE_B_IDLE;
+                       break;
+               case OTG_STATE_A_HOST:
+                       tu->otg.state = OTG_STATE_A_IDLE;
+                       break;
+               default:
+                       break;
+               }
+               printk("USB cable disconnected\n");
+               vbus_active = 0;
+       }
+
+       prev_state = tu->vbus_state;
+       tu->vbus_state = reg & 0x01;
+       if (prev_state != tu->vbus_state)
+               sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
+}
+
+static void tahvo_usb_become_host(struct tahvo_usb *tu)
+{
+       u32 l;
+
+       /* Clear system and transceiver controlled bits
+        * also mark the A-session is always valid */
+       omap_otg_init();
+
+       l = omap_readl(OTG_CTRL);
+       l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
+       l |= OTG_ASESSVLD;
+       omap_writel(l, OTG_CTRL);
+
+       /* Power up the transceiver in USB host mode */
+       tahvo_write_reg(TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
+                       USBR_MASTER_SW2 | USBR_MASTER_SW1);
+       tu->otg.state = OTG_STATE_A_IDLE;
+
+       check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
+{
+       host_suspend(tu);
+       tu->otg.state = OTG_STATE_A_IDLE;
+}
+
+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
+{
+       u32 l;
+
+       /* Clear system and transceiver controlled bits
+        * and enable ID to mark peripheral mode and
+        * BSESSEND to mark no Vbus */
+       omap_otg_init();
+       l = omap_readl(OTG_CTRL);
+       l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
+       l |= OTG_ID | OTG_BSESSEND;
+       omap_writel(l, OTG_CTRL);
+
+       /* Power up transceiver and set it in USB perhiperal mode */
+       tahvo_write_reg(TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
+       tu->otg.state = OTG_STATE_B_IDLE;
+
+       check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
+{
+       u32 l;
+
+       l = omap_readl(OTG_CTRL);
+       l &= ~OTG_BSESSVLD;
+       l |= OTG_BSESSEND;
+       omap_writel(l, OTG_CTRL);
+
+       if (tu->otg.gadget)
+               usb_gadget_vbus_disconnect(tu->otg.gadget);
+       tu->otg.state = OTG_STATE_B_IDLE;
+
+}
+
+static void tahvo_usb_power_off(struct tahvo_usb *tu)
+{
+       u32 l;
+       int id;
+
+       /* Disable gadget controller if any */
+       if (tu->otg.gadget)
+               usb_gadget_vbus_disconnect(tu->otg.gadget);
+
+       host_suspend(tu);
+
+       /* Disable OTG and interrupts */
+       if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
+               id = OTG_ID;
+       else
+               id = 0;
+       l = omap_readl(OTG_CTRL);
+       l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
+       l |= id | OTG_BSESSEND;
+       omap_writel(l, OTG_CTRL);
+       omap_writew(0, OTG_IRQ_EN);
+
+       l = omap_readl(OTG_SYSCON_2);
+       l &= ~OTG_EN;
+       omap_writel(l, OTG_SYSCON_2);
+
+       l = omap_readl(OTG_SYSCON_1);
+       l |= OTG_IDLE_EN;
+       omap_writel(l, OTG_SYSCON_1);
+
+       /* Power off transceiver */
+       tahvo_write_reg(TAHVO_REG_USBR, 0);
+       tu->otg.state = OTG_STATE_UNDEFINED;
+}
+
+
+static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
+{
+       struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
+
+       dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
+
+       if (dev->state == OTG_STATE_B_PERIPHERAL) {
+               /* REVISIT: Can Tahvo charge battery from VBUS? */
+       }
+       return 0;
+}
+
+static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
+{
+       struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
+       u16 w;
+
+       dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
+
+       w = tahvo_read_reg(TAHVO_REG_USBR);
+       if (suspend)
+               w &= ~USBR_NSUSPEND;
+       else
+               w |= USBR_NSUSPEND;
+       tahvo_write_reg(TAHVO_REG_USBR, w);
+
+       return 0;
+}
+
+static int tahvo_usb_start_srp(struct otg_transceiver *dev)
+{
+       struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
+       u32 otg_ctrl;
+
+       dev_dbg(&tu->pt_dev->dev, "start_srp\n");
+
+       if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
+               return -ENODEV;
+
+       otg_ctrl = omap_readl(OTG_CTRL);
+       if (!(otg_ctrl & OTG_BSESSEND))
+               return -EINVAL;
+
+       otg_ctrl |= OTG_B_BUSREQ;
+       otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
+       omap_writel(otg_ctrl, OTG_CTRL);
+       tu->otg.state = OTG_STATE_B_SRP_INIT;
+
+       return 0;
+}
+
+static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
+{
+       struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
+
+       dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
+#ifdef CONFIG_USB_OTG
+       /* REVISIT: Add this for OTG */
+#endif
+       return -EINVAL;
+}
+
+static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+       struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
+       u32 l;
+
+       dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
+
+       if (otg == NULL)
+               return -ENODEV;
+
+#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
+
+       mutex_lock(&tu->serialize);
+
+       if (host == NULL) {
+               if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
+                       tahvo_usb_power_off(tu);
+               tu->otg.host = NULL;
+               mutex_unlock(&tu->serialize);
+               return 0;
+       }
+
+       l = omap_readl(OTG_SYSCON_1);
+       l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
+       omap_writel(l, OTG_SYSCON_1);
+
+       if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
+               tu->otg.host = NULL;
+               tahvo_usb_become_host(tu);
+       } else
+               host_suspend(tu);
+
+       tu->otg.host = host;
+
+       mutex_unlock(&tu->serialize);
+#else
+       /* No host mode configured, so do not allow host controlled to be set */
+       return -EINVAL;
+#endif
+
+       return 0;
+}
+
+static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
+{
+       struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
+
+       dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
+
+       if (!otg)
+               return -ENODEV;
+
+#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
+
+       mutex_lock(&tu->serialize);
+
+       if (!gadget) {
+               if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
+                       tahvo_usb_power_off(tu);
+               tu->otg.gadget = NULL;
+               mutex_unlock(&tu->serialize);
+               return 0;
+       }
+
+       tu->otg.gadget = gadget;
+       if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
+               tahvo_usb_become_peripheral(tu);
+
+       mutex_unlock(&tu->serialize);
+#else
+       /* No gadget mode configured, so do not allow host controlled to be set */
+       return -EINVAL;
+#endif
+
+       return 0;
+}
+
+static void tahvo_usb_irq_work(struct work_struct *work)
+{
+       struct tahvo_usb *tu = container_of(work, struct tahvo_usb, irq_work);
+
+       mutex_lock(&tu->serialize);
+       check_vbus_state(tu);
+       mutex_unlock(&tu->serialize);
+}
+
+static void tahvo_usb_vbus_interrupt(unsigned long arg)
+{
+       struct tahvo_usb *tu = (struct tahvo_usb *) arg;
+
+       tahvo_ack_irq(TAHVO_INT_VBUSON);
+       /* Seems we need this to acknowledge the interrupt */
+       tahvo_read_reg(TAHVO_REG_IDSR);
+       schedule_work(&tu->irq_work);
+}
+
+#ifdef CONFIG_USB_OTG
+static ssize_t otg_mode_show(struct device *device,
+                            struct device_attribute *attr, char *buf)
+{
+       struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
+       switch (tu->tahvo_mode) {
+       case TAHVO_MODE_HOST:
+               return sprintf(buf, "host\n");
+       case TAHVO_MODE_PERIPHERAL:
+               return sprintf(buf, "peripheral\n");
+       }
+       return sprintf(buf, "unknown\n");
+}
+
+static ssize_t otg_mode_store(struct device *device,
+                             struct device_attribute *attr,
+                             const char *buf, size_t count)
+{
+       struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
+       int r;
+
+       r = strlen(buf);
+       mutex_lock(&tu->serialize);
+       if (strncmp(buf, "host", 4) == 0) {
+               if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+                       tahvo_usb_stop_peripheral(tu);
+               tu->tahvo_mode = TAHVO_MODE_HOST;
+               if (tu->otg.host) {
+                       printk(KERN_INFO "Selected HOST mode: host controller present.\n");
+                       tahvo_usb_become_host(tu);
+               } else {
+                       printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
+                       tahvo_usb_power_off(tu);
+               }
+       } else if (strncmp(buf, "peripheral", 10) == 0) {
+               if (tu->tahvo_mode == TAHVO_MODE_HOST)
+                       tahvo_usb_stop_host(tu);
+               tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+               if (tu->otg.gadget) {
+                       printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
+                       tahvo_usb_become_peripheral(tu);
+               } else {
+                       printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
+                       tahvo_usb_power_off(tu);
+               }
+       } else
+               r = -EINVAL;
+
+       mutex_unlock(&tu->serialize);
+       return r;
+}
+
+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
+#endif
+
+static int tahvo_usb_probe(struct device *dev)
+{
+       struct tahvo_usb *tu;
+       int ret;
+
+       dev_dbg(dev, "probe\n");
+
+       /* Create driver data */
+       tu = kmalloc(sizeof(*tu), GFP_KERNEL);
+       if (!tu)
+               return -ENOMEM;
+       memset(tu, 0, sizeof(*tu));
+       tu->pt_dev = container_of(dev, struct platform_device, dev);
+#ifdef CONFIG_USB_OTG
+       /* Default mode */
+#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
+       tu->tahvo_mode = TAHVO_MODE_HOST;
+#else
+       tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+#endif
+#endif
+
+       INIT_WORK(&tu->irq_work, tahvo_usb_irq_work);
+       mutex_init(&tu->serialize);
+
+       /* Set initial state, so that we generate kevents only on
+        * state changes */
+       tu->vbus_state = tahvo_read_reg(TAHVO_REG_IDSR) & 0x01;
+
+       /* We cannot enable interrupt until omap_udc is initialized */
+       ret = tahvo_request_irq(TAHVO_INT_VBUSON, tahvo_usb_vbus_interrupt,
+                               (unsigned long) tu, "vbus_interrupt");
+       if (ret != 0) {
+               kfree(tu);
+               printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
+               return ret;
+       }
+
+       /* Attributes */
+       ret = device_create_file(dev, &dev_attr_vbus_state);
+#ifdef CONFIG_USB_OTG
+       ret |= device_create_file(dev, &dev_attr_otg_mode);
+#endif
+       if (ret)
+               printk(KERN_ERR "attribute creation failed: %d\n", ret);
+
+       /* Create OTG interface */
+       tahvo_usb_power_off(tu);
+       tu->otg.state = OTG_STATE_UNDEFINED;
+       tu->otg.label = DRIVER_NAME;
+       tu->otg.set_host = tahvo_usb_set_host;
+       tu->otg.set_peripheral = tahvo_usb_set_peripheral;
+       tu->otg.set_power = tahvo_usb_set_power;
+       tu->otg.set_suspend = tahvo_usb_set_suspend;
+       tu->otg.start_srp = tahvo_usb_start_srp;
+       tu->otg.start_hnp = tahvo_usb_start_hnp;
+
+       ret = otg_set_transceiver(&tu->otg);
+       if (ret < 0) {
+               printk(KERN_ERR "Cannot register USB transceiver\n");
+               kfree(tu);
+               tahvo_free_irq(TAHVO_INT_VBUSON);
+               return ret;
+       }
+
+       dev->driver_data = tu;
+
+       /* Act upon current vbus state once at startup. A vbus state irq may or
+        * may not be generated in addition to this. */
+       schedule_work(&tu->irq_work);
+       return 0;
+}
+
+static int tahvo_usb_remove(struct device *dev)
+{
+       dev_dbg(dev, "remove\n");
+
+       tahvo_free_irq(TAHVO_INT_VBUSON);
+       flush_scheduled_work();
+       otg_set_transceiver(0);
+       device_remove_file(dev, &dev_attr_vbus_state);
+#ifdef CONFIG_USB_OTG
+       device_remove_file(dev, &dev_attr_otg_mode);
+#endif
+       return 0;
+}
+
+static struct device_driver tahvo_usb_driver = {
+       .name           = "tahvo-usb",
+       .bus            = &platform_bus_type,
+       .probe          = tahvo_usb_probe,
+       .remove         = tahvo_usb_remove,
+};
+
+static struct platform_device tahvo_usb_device = {
+       .name           = "tahvo-usb",
+       .id             = -1,
+};
+
+static int __init tahvo_usb_init(void)
+{
+       int ret = 0;
+
+       printk(KERN_INFO "Tahvo USB transceiver driver initializing\n");
+       ret = driver_register(&tahvo_usb_driver);
+       if (ret)
+               return ret;
+       ret = platform_device_register(&tahvo_usb_device);
+       if (ret < 0) {
+               driver_unregister(&tahvo_usb_driver);
+               return ret;
+       }
+       ret = driver_register(&omap_otg_driver);
+       if (ret) {
+               platform_device_unregister(&tahvo_usb_device);
+               driver_unregister(&tahvo_usb_driver);
+               return ret;
+       }
+       return 0;
+}
+
+subsys_initcall(tahvo_usb_init);
+
+static void __exit tahvo_usb_exit(void)
+{
+       driver_unregister(&omap_otg_driver);
+       platform_device_unregister(&tahvo_usb_device);
+       driver_unregister(&tahvo_usb_driver);
+}
+module_exit(tahvo_usb_exit);
+
+MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
diff --git a/drivers/cbus/tahvo-user.c b/drivers/cbus/tahvo-user.c
new file mode 100644 (file)
index 0000000..873d648
--- /dev/null
@@ -0,0 +1,405 @@
+/**
+ * drivers/cbus/tahvo-user.c
+ *
+ * Tahvo user space interface functions
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+
+#include <asm/uaccess.h>
+
+#include "tahvo.h"
+
+#include "user_retu_tahvo.h"
+
+/* Maximum size of IRQ node buffer/pool */
+#define TAHVO_MAX_IRQ_BUF_LEN  16
+
+#define PFX                    "tahvo-user: "
+
+/* Bitmap for marking the interrupt sources as having the handlers */
+static u32 tahvo_irq_bits;
+
+/* For allowing only one user process to subscribe to the tahvo interrupts */
+static struct file *tahvo_irq_subscr = NULL;
+
+/* For poll and IRQ passing */
+struct tahvo_irq {
+       u32 id;
+       struct list_head node;
+};
+
+static spinlock_t tahvo_irqs_lock;
+static struct tahvo_irq *tahvo_irq_block;
+static LIST_HEAD(tahvo_irqs);
+static LIST_HEAD(tahvo_irqs_reserve);
+
+/* Wait queue - used when user wants to read the device */
+DECLARE_WAIT_QUEUE_HEAD(tahvo_user_waitqueue);
+
+/* Semaphore to protect irq subscription sequence */
+static struct mutex tahvo_mutex;
+
+/* This array specifies TAHVO register types (read/write/toggle) */
+static const u8 tahvo_access_bits[] = {
+       1,
+       4,
+       1,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       3,
+       1
+};
+
+/*
+ * The handler for all TAHVO interrupts.
+ *
+ * arg is the interrupt source in TAHVO.
+ */
+static void tahvo_user_irq_handler(unsigned long arg)
+{
+       struct tahvo_irq *irq;
+
+       /* user has to re-enable the interrupt once ready
+        * for receiving them again */
+       tahvo_disable_irq(arg);
+       tahvo_ack_irq(arg);
+
+       spin_lock(&tahvo_irqs_lock);
+       if (list_empty(&tahvo_irqs_reserve)) {
+               spin_unlock(&tahvo_irqs_lock);
+               return;
+       }
+       irq = list_entry((&tahvo_irqs_reserve)->next, struct tahvo_irq, node);
+       irq->id = arg;
+       list_move_tail(&irq->node, &tahvo_irqs);
+       spin_unlock(&tahvo_irqs_lock);
+
+       /* wake up waiting thread */
+       wake_up(&tahvo_user_waitqueue);
+}
+
+/*
+ * This routine sets up the interrupt handler and marks an interrupt source
+ * in TAHVO as a candidate for signal delivery to the user process.
+ */
+static int tahvo_user_subscribe_to_irq(int id, struct file *filp)
+{
+       int ret;
+
+       mutex_lock(&tahvo_mutex);
+       if ((tahvo_irq_subscr != NULL) && (tahvo_irq_subscr != filp)) {
+               mutex_unlock(&tahvo_mutex);
+               return -EBUSY;
+       }
+       /* Store the file pointer of the first user process registering IRQs */
+       tahvo_irq_subscr = filp;
+       mutex_unlock(&tahvo_mutex);
+
+       if (tahvo_irq_bits & (1 << id))
+               return 0;
+
+       ret = tahvo_request_irq(id, tahvo_user_irq_handler, id, "");
+       if (ret < 0)
+               return ret;
+
+       /* Mark that this interrupt has a handler */
+       tahvo_irq_bits |= 1 << id;
+
+       return 0;
+}
+
+/*
+ * Unregister all TAHVO interrupt handlers
+ */
+static void tahvo_unreg_irq_handlers(void)
+{
+       int id;
+
+       if (!tahvo_irq_bits)
+               return;
+
+       for (id = 0; id < MAX_TAHVO_IRQ_HANDLERS; id++)
+               if (tahvo_irq_bits & (1 << id))
+                       tahvo_free_irq(id);
+
+       tahvo_irq_bits = 0;
+}
+
+/*
+ * Write to TAHVO register.
+ * Returns 0 upon success, a negative error value otherwise.
+ */
+static int tahvo_user_write_with_mask(u32 field, u16 value)
+{
+       u32 mask;
+       u32 reg;
+       u_short tmp;
+       unsigned long flags;
+
+       mask = MASK(field);
+       reg = REG(field);
+
+       /* Detect bad mask and reg */
+       if (mask == 0 || reg > TAHVO_REG_MAX ||
+           tahvo_access_bits[reg] == READ_ONLY) {
+               printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
+                      reg, mask);
+               return -EINVAL;
+       }
+
+       /* Justify value according to mask */
+       while (!(mask & 1)) {
+               value = value << 1;
+               mask = mask >> 1;
+       }
+
+       spin_lock_irqsave(&tahvo_lock, flags);
+       if (tahvo_access_bits[reg] == TOGGLE) {
+               /* No need to detect previous content of register */
+               tmp = 0;
+       } else {
+               /* Read current value of register */
+               tmp = tahvo_read_reg(reg);
+       }
+       /* Generate a new value */
+       tmp = (tmp & ~MASK(field)) | (value & MASK(field));
+       /* Write data to TAHVO */
+       tahvo_write_reg(reg, tmp);
+       spin_unlock_irqrestore(&tahvo_lock, flags);
+
+       return 0;
+}
+
+/*
+ * Read TAHVO register.
+ */
+static u32 tahvo_user_read_with_mask(u32 field)
+{
+       u_short value;
+       u32 mask, reg;
+
+       mask = MASK(field);
+       reg = REG(field);
+
+       /* Detect bad mask and reg */
+       if (mask == 0 || reg > TAHVO_REG_MAX) {
+               printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
+                      reg, mask);
+               return -EINVAL;
+       }
+
+       /* Read the register */
+       value = tahvo_read_reg(reg) & mask;
+
+       /* Right justify value */
+       while (!(mask & 1)) {
+               value = value >> 1;
+               mask = mask >> 1;
+       }
+
+       return value;
+}
+
+/*
+ * Close device
+ */
+static int tahvo_close(struct inode *inode, struct file *filp)
+{
+       /* Unregister all interrupts that have been registered */
+       if (tahvo_irq_subscr == filp) {
+               tahvo_unreg_irq_handlers();
+               tahvo_irq_subscr = NULL;
+       }
+
+       return 0;
+}
+
+/*
+ * Device control (ioctl)
+ */
+static int tahvo_ioctl(struct inode *inode, struct file *filp,
+                      unsigned int cmd, unsigned long arg)
+{
+       struct retu_tahvo_write_parms par;
+       int ret;
+
+       switch (cmd) {
+       case URT_IOCT_IRQ_SUBSCR:
+               return tahvo_user_subscribe_to_irq(arg, filp);
+       case TAHVO_IOCH_READ:
+               return tahvo_user_read_with_mask(arg);
+       case TAHVO_IOCX_WRITE:
+               ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
+               if (ret)
+                       printk(KERN_ERR "copy_from_user failed: %d\n", ret);
+               par.result = tahvo_user_write_with_mask(par.field, par.value);
+               ret = copy_to_user((void __user *) arg, &par, sizeof(par));
+               if (ret)
+                       printk(KERN_ERR "copy_to_user failed: %d\n", ret);
+               break;
+       default:
+               return -ENOIOCTLCMD;
+       }
+       return 0;
+}
+
+/*
+ * Read from device
+ */
+static ssize_t tahvo_read(struct file *filp, char *buf, size_t count,
+                         loff_t * offp)
+{
+       struct tahvo_irq *irq;
+
+       u32 nr, i;
+
+       /* read not permitted if neither filp nor anyone has registered IRQs */
+       if (tahvo_irq_subscr != filp)
+               return -EPERM;
+
+       if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
+               return -EINVAL;
+
+       nr = count / sizeof(u32);
+
+       for (i = 0; i < nr; i++) {
+               unsigned long flags;
+               u32 irq_id;
+               int ret;
+
+               ret = wait_event_interruptible(tahvo_user_waitqueue,
+                                              !list_empty(&tahvo_irqs));
+               if (ret < 0)
+                       return ret;
+
+               spin_lock_irqsave(&tahvo_irqs_lock, flags);
+               irq = list_entry((&tahvo_irqs)->next, struct tahvo_irq, node);
+               irq_id = irq->id;
+               list_move(&irq->node, &tahvo_irqs_reserve);
+               spin_unlock_irqrestore(&tahvo_irqs_lock, flags);
+
+               ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
+                                  sizeof(irq_id));
+               if (ret)
+                       printk(KERN_ERR "copy_to_user failed: %d\n", ret);
+       }
+
+       return count;
+}
+
+/*
+ * Poll method
+ */
+static unsigned tahvo_poll(struct file *filp, struct poll_table_struct *pt)
+{
+       if (!list_empty(&tahvo_irqs))
+               return POLLIN;
+
+       poll_wait(filp, &tahvo_user_waitqueue, pt);
+
+       if (!list_empty(&tahvo_irqs))
+               return POLLIN;
+       else
+               return 0;
+}
+
+static struct file_operations tahvo_user_fileops = {
+       .owner = THIS_MODULE,
+       .ioctl = tahvo_ioctl,
+       .read = tahvo_read,
+       .release = tahvo_close,
+       .poll = tahvo_poll
+};
+
+static struct miscdevice tahvo_device = {
+       .minor = MISC_DYNAMIC_MINOR,
+       .name = "tahvo",
+       .fops = &tahvo_user_fileops
+};
+
+/*
+ * Initialization
+ *
+ * @return 0 if successful, error value otherwise.
+ */
+int tahvo_user_init(void)
+{
+       struct tahvo_irq *irq;
+       int res, i;
+
+       irq = kmalloc(sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN, GFP_KERNEL);
+       if (irq == NULL) {
+               printk(KERN_ERR PFX "kmalloc failed\n");
+               return -ENOMEM;
+       }
+       memset(irq, 0, sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN);
+       for (i = 0; i < TAHVO_MAX_IRQ_BUF_LEN; i++)
+               list_add(&irq[i].node, &tahvo_irqs_reserve);
+
+       tahvo_irq_block = irq;
+
+       spin_lock_init(&tahvo_irqs_lock);
+       mutex_init(&tahvo_mutex);
+
+       /* Request a misc device */
+       res = misc_register(&tahvo_device);
+       if (res < 0) {
+               printk(KERN_ERR PFX "unable to register misc device for %s\n",
+                      tahvo_device.name);
+               kfree(irq);
+               return res;
+       }
+
+       return 0;
+}
+
+/*
+ * Cleanup.
+ */
+void tahvo_user_cleanup(void)
+{
+       /* Unregister our misc device */
+       misc_deregister(&tahvo_device);
+       /* Unregister and disable all TAHVO interrupts */
+       tahvo_unreg_irq_handlers();
+       kfree(tahvo_irq_block);
+}
+
+MODULE_DESCRIPTION("Tahvo ASIC user space functions");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mikko Ylinen");
diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c
new file mode 100644 (file)
index 0000000..e734c4c
--- /dev/null
@@ -0,0 +1,442 @@
+/**
+ * drivers/cbus/tahvo.c
+ *
+ * Support functions for Tahvo ASIC
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
+ *           David Weinehall <david.weinehall@nokia.com>, and
+ *           Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/uaccess.h>
+
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/board-nokia.h>
+
+#include "cbus.h"
+#include "tahvo.h"
+
+#define TAHVO_ID               0x02
+#define PFX                    "tahvo: "
+
+static int tahvo_initialized;
+static int tahvo_irq_pin;
+static int tahvo_is_betty;
+
+static struct tasklet_struct tahvo_tasklet;
+spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED;
+
+static struct completion device_release;
+
+struct tahvo_irq_handler_desc {
+       int (*func)(unsigned long);
+       unsigned long arg;
+       char name[8];
+};
+
+static struct tahvo_irq_handler_desc tahvo_irq_handlers[MAX_TAHVO_IRQ_HANDLERS];
+
+/**
+ * tahvo_read_reg - Read a value from a register in Tahvo
+ * @reg: the register to read from
+ *
+ * This function returns the contents of the specified register
+ */
+int tahvo_read_reg(int reg)
+{
+       BUG_ON(!tahvo_initialized);
+       return cbus_read_reg(cbus_host, TAHVO_ID, reg);
+}
+
+/**
+ * tahvo_write_reg - Write a value to a register in Tahvo
+ * @reg: the register to write to
+ * @reg: the value to write to the register
+ *
+ * This function writes a value to the specified register
+ */
+void tahvo_write_reg(int reg, u16 val)
+{
+       BUG_ON(!tahvo_initialized);
+       cbus_write_reg(cbus_host, TAHVO_ID, reg, val);
+}
+
+/**
+ * tahvo_set_clear_reg_bits - set and clear register bits atomically
+ * @reg: the register to write to
+ * @bits: the bits to set
+ *
+ * This function sets and clears the specified Tahvo register bits atomically
+ */
+void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear)
+{
+       unsigned long flags;
+       u16 w;
+
+       spin_lock_irqsave(&tahvo_lock, flags);
+       w = tahvo_read_reg(reg);
+       w &= ~clear;
+       w |= set;
+       tahvo_write_reg(reg, w);
+       spin_unlock_irqrestore(&tahvo_lock, flags);
+}
+
+/*
+ * Disable given TAHVO interrupt
+ */
+void tahvo_disable_irq(int id)
+{
+       unsigned long flags;
+       u16 mask;
+
+       spin_lock_irqsave(&tahvo_lock, flags);
+       mask = tahvo_read_reg(TAHVO_REG_IMR);
+       mask |= 1 << id;
+       tahvo_write_reg(TAHVO_REG_IMR, mask);
+       spin_unlock_irqrestore(&tahvo_lock, flags);
+}
+
+/*
+ * Enable given TAHVO interrupt
+ */
+void tahvo_enable_irq(int id)
+{
+       unsigned long flags;
+       u16 mask;
+
+       spin_lock_irqsave(&tahvo_lock, flags);
+       mask = tahvo_read_reg(TAHVO_REG_IMR);
+       mask &= ~(1 << id);
+       tahvo_write_reg(TAHVO_REG_IMR, mask);
+       spin_unlock_irqrestore(&tahvo_lock, flags);
+}
+
+/*
+ * Acknowledge given TAHVO interrupt
+ */
+void tahvo_ack_irq(int id)
+{
+       tahvo_write_reg(TAHVO_REG_IDR, 1 << id);
+}
+
+static int tahvo_7bit_backlight;
+
+int tahvo_get_backlight_level(void)
+{
+       int mask;
+
+       if (tahvo_7bit_backlight)
+               mask = 0x7f;
+       else
+               mask = 0x0f;
+       return tahvo_read_reg(TAHVO_REG_LEDPWMR) & mask;
+}
+
+int tahvo_get_max_backlight_level(void)
+{
+       if (tahvo_7bit_backlight)
+               return 0x7f;
+       else
+               return 0x0f;
+}
+
+void tahvo_set_backlight_level(int level)
+{
+       int max_level;
+
+       max_level = tahvo_get_max_backlight_level();
+       if (level > max_level)
+               level = max_level;
+       tahvo_write_reg(TAHVO_REG_LEDPWMR, level);
+}
+
+/*
+ * TAHVO interrupt handler. Only schedules the tasklet.
+ */
+static irqreturn_t tahvo_irq_handler(int irq, void *dev_id)
+{
+       tasklet_schedule(&tahvo_tasklet);
+       return IRQ_HANDLED;
+}
+
+/*
+ * Tasklet handler
+ */
+static void tahvo_tasklet_handler(unsigned long data)
+{
+       struct tahvo_irq_handler_desc *hnd;
+       u16 id;
+       u16 im;
+       int i;
+
+       for (;;) {
+               id = tahvo_read_reg(TAHVO_REG_IDR);
+               im = ~tahvo_read_reg(TAHVO_REG_IMR);
+               id &= im;
+
+               if (!id)
+                       break;
+
+               for (i = 0; id != 0; i++, id >>= 1) {
+                       if (!(id & 1))
+                               continue;
+                       hnd = &tahvo_irq_handlers[i];
+                       if (hnd->func == NULL) {
+                               /* Spurious tahvo interrupt - just ack it */
+                               printk(KERN_INFO "Spurious Tahvo interrupt "
+                                                "(id %d)\n", i);
+                               tahvo_disable_irq(i);
+                               tahvo_ack_irq(i);
+                               continue;
+                       }
+                       hnd->func(hnd->arg);
+                       /*
+                        * Don't acknowledge the interrupt here
+                        * It must be done explicitly
+                        */
+               }
+       }
+}
+
+/*
+ * Register the handler for a given TAHVO interrupt source.
+ */
+int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
+{
+       struct tahvo_irq_handler_desc *hnd;
+
+       if (irq_handler == NULL || id >= MAX_TAHVO_IRQ_HANDLERS ||
+           name == NULL) {
+               printk(KERN_ERR PFX "Invalid arguments to %s\n",
+                      __FUNCTION__);
+               return -EINVAL;
+       }
+       hnd = &tahvo_irq_handlers[id];
+       if (hnd->func != NULL) {
+               printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
+               return -EBUSY;
+       }
+       printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
+              id, name);
+       hnd->func = irq_handler;
+       hnd->arg = arg;
+       strlcpy(hnd->name, name, sizeof(hnd->name));
+
+       tahvo_ack_irq(id);
+       tahvo_enable_irq(id);
+
+       return 0;
+}
+
+/*
+ * Unregister the handler for a given TAHVO interrupt source.
+ */
+void tahvo_free_irq(int id)
+{
+       struct tahvo_irq_handler_desc *hnd;
+
+       if (id >= MAX_TAHVO_IRQ_HANDLERS) {
+               printk(KERN_ERR PFX "Invalid argument to %s\n",
+                      __FUNCTION__);
+               return;
+       }
+       hnd = &tahvo_irq_handlers[id];
+       if (hnd->func == NULL) {
+               printk(KERN_ERR PFX "IRQ %d already freed\n", id);
+               return;
+       }
+
+       tahvo_disable_irq(id);
+       hnd->func = NULL;
+}
+
+/**
+ * tahvo_probe - Probe for Tahvo ASIC
+ * @dev: the Tahvo device
+ *
+ * Probe for the Tahvo ASIC and allocate memory
+ * for its device-struct if found
+ */
+static int __devinit tahvo_probe(struct device *dev)
+{
+       const struct omap_em_asic_bb5_config * em_asic_config;
+       int rev, id, ret;
+
+       /* Prepare tasklet */
+       tasklet_init(&tahvo_tasklet, tahvo_tasklet_handler, 0);
+
+       em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
+                                        struct omap_em_asic_bb5_config);
+       if (em_asic_config == NULL) {
+               printk(KERN_ERR PFX "Unable to retrieve config data\n");
+               return -ENODATA;
+       }
+
+       tahvo_initialized = 1;
+
+       rev = tahvo_read_reg(TAHVO_REG_ASICR);
+
+       id = (rev >> 8) & 0xff;
+       if (id == 0x03) {
+               if ((rev & 0xff) >= 0x50)
+                       tahvo_7bit_backlight = 1;
+       } else if (id == 0x0b) {
+               tahvo_is_betty = 1;
+               tahvo_7bit_backlight = 1;
+       } else {
+               printk(KERN_ERR "Tahvo/Betty chip not found");
+               return -ENODEV;
+       }
+
+       printk(KERN_INFO "%s v%d.%d found\n", tahvo_is_betty ? "Betty" : "Tahvo",
+              (rev >> 4) & 0x0f, rev & 0x0f);
+
+       tahvo_irq_pin = em_asic_config->tahvo_irq_gpio;
+
+       if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) {
+               printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
+               return ret;
+       }
+
+       /* Set the pin as input */
+       gpio_direction_input(tahvo_irq_pin);
+
+       /* Rising edge triggers the IRQ */
+       set_irq_type(gpio_to_irq(tahvo_irq_pin), IRQ_TYPE_EDGE_RISING);
+
+       /* Mask all TAHVO interrupts */
+       tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
+
+       ret = request_irq(gpio_to_irq(tahvo_irq_pin), tahvo_irq_handler, 0,
+                         "tahvo", 0);
+       if (ret < 0) {
+               printk(KERN_ERR PFX "Unable to register IRQ handler\n");
+               gpio_free(tahvo_irq_pin);
+               return ret;
+       }
+#ifdef CONFIG_CBUS_TAHVO_USER
+       /* Initialize user-space interface */
+       if (tahvo_user_init() < 0) {
+               printk(KERN_ERR "Unable to initialize driver\n");
+               free_irq(gpio_to_irq(tahvo_irq_pin), 0);
+               gpio_free(tahvo_irq_pin);
+               return ret;
+       }
+#endif
+       return 0;
+}
+
+static int tahvo_remove(struct device *dev)
+{
+#ifdef CONFIG_CBUS_TAHVO_USER
+       tahvo_user_cleanup();
+#endif
+       /* Mask all TAHVO interrupts */
+       tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
+       free_irq(gpio_to_irq(tahvo_irq_pin), 0);
+       gpio_free(tahvo_irq_pin);
+       tasklet_kill(&tahvo_tasklet);
+
+       return 0;
+}
+
+static void tahvo_device_release(struct device *dev)
+{
+       complete(&device_release);
+}
+
+static struct device_driver tahvo_driver = {
+       .name           = "tahvo",
+       .bus            = &platform_bus_type,
+       .probe          = tahvo_probe,
+       .remove         = tahvo_remove,
+};
+
+static struct platform_device tahvo_device = {
+       .name           = "tahvo",
+       .id             = -1,
+       .dev = {
+               .release = tahvo_device_release,
+       }
+};
+
+/**
+ * tahvo_init - initialise Tahvo driver
+ *
+ * Initialise the Tahvo driver and return 0 if everything worked ok
+ */
+static int __init tahvo_init(void)
+{
+       int ret = 0;
+
+       printk(KERN_INFO "Tahvo/Betty driver initialising\n");
+
+       init_completion(&device_release);
+
+       if ((ret = driver_register(&tahvo_driver)) < 0)
+               return ret;
+
+       if ((ret = platform_device_register(&tahvo_device)) < 0) {
+               driver_unregister(&tahvo_driver);
+               return ret;
+       }
+       return 0;
+}
+
+/*
+ * Cleanup
+ */
+static void __exit tahvo_exit(void)
+{
+       platform_device_unregister(&tahvo_device);
+       driver_unregister(&tahvo_driver);
+       wait_for_completion(&device_release);
+}
+
+EXPORT_SYMBOL(tahvo_request_irq);
+EXPORT_SYMBOL(tahvo_free_irq);
+EXPORT_SYMBOL(tahvo_enable_irq);
+EXPORT_SYMBOL(tahvo_disable_irq);
+EXPORT_SYMBOL(tahvo_ack_irq);
+EXPORT_SYMBOL(tahvo_read_reg);
+EXPORT_SYMBOL(tahvo_write_reg);
+EXPORT_SYMBOL(tahvo_get_backlight_level);
+EXPORT_SYMBOL(tahvo_get_max_backlight_level);
+EXPORT_SYMBOL(tahvo_set_backlight_level);
+
+subsys_initcall(tahvo_init);
+module_exit(tahvo_exit);
+
+MODULE_DESCRIPTION("Tahvo ASIC control");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, David Weinehall, and Mikko Ylinen");
diff --git a/drivers/cbus/tahvo.h b/drivers/cbus/tahvo.h
new file mode 100644 (file)
index 0000000..b7a8ee1
--- /dev/null
@@ -0,0 +1,61 @@
+/*
+ * drivers/cbus/tahvo.h
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
+ *           David Weinehall <david.weinehall@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __DRIVERS_CBUS_TAHVO_H
+#define __DRIVERS_CBUS_TAHVO_H
+
+#include <linux/types.h>
+
+/* Registers */
+#define TAHVO_REG_ASICR                0x00    /* ASIC ID & revision */
+#define TAHVO_REG_IDR          0x01    /* Interrupt ID */
+#define TAHVO_REG_IDSR         0x02    /* Interrupt status */
+#define TAHVO_REG_IMR          0x03    /* Interrupt mask */
+#define TAHVO_REG_LEDPWMR      0x05    /* LED PWM */
+#define TAHVO_REG_USBR         0x06    /* USB control */
+#define TAHVO_REG_MAX          0x0d
+
+/* Interrupt sources */
+#define TAHVO_INT_VBUSON       0
+
+#define MAX_TAHVO_IRQ_HANDLERS 8
+
+int tahvo_read_reg(int reg);
+void tahvo_write_reg(int reg, u16 val);
+void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear);
+int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
+void tahvo_free_irq(int id);
+void tahvo_enable_irq(int id);
+void tahvo_disable_irq(int id);
+void tahvo_ack_irq(int id);
+int tahvo_get_backlight_level(void);
+int tahvo_get_max_backlight_level(void);
+void tahvo_set_backlight_level(int level);
+
+#ifdef CONFIG_CBUS_TAHVO_USER
+int tahvo_user_init(void);
+void tahvo_user_cleanup(void);
+#endif
+
+extern spinlock_t tahvo_lock;
+
+#endif /* __DRIVERS_CBUS_TAHVO_H */
diff --git a/drivers/cbus/user_retu_tahvo.h b/drivers/cbus/user_retu_tahvo.h
new file mode 100644 (file)
index 0000000..a5c2190
--- /dev/null
@@ -0,0 +1,75 @@
+/**
+ * drivers/cbus/user_retu_tahvo.h
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
+ *
+ * Definitions and types used by both retu-user and tahvo-user.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _USER_RETU_TAHVO_H
+#define _USER_RETU_TAHVO_H
+
+/* Chip IDs */
+#define CHIP_RETU      1
+#define CHIP_TAHVO     2
+
+/* Register access type bits */
+#define READ_ONLY              1
+#define WRITE_ONLY             2
+#define READ_WRITE             3
+#define TOGGLE                 4
+
+#define MASK(field)            ((u16)(field & 0xFFFF))
+#define REG(field)             ((u16)((field >> 16) & 0x3F))
+
+/*** IOCTL definitions. These should be kept in sync with user space **********/
+
+#define URT_IOC_MAGIC '`'
+
+/*
+ * IOCTL function naming conventions:
+ * ==================================
+ *  0 -- No argument and return value
+ *  S -- Set through a pointer
+ *  T -- Tell directly with the argument value
+ *  G -- Reply by setting through a pointer
+ *  Q -- response is on the return value
+ *  X -- S and G atomically
+ *  H -- T and Q atomically
+ */
+
+/* General */
+#define URT_IOCT_IRQ_SUBSCR            _IO(URT_IOC_MAGIC, 0)
+
+/* RETU */
+#define RETU_IOCH_READ                 _IO(URT_IOC_MAGIC, 1)
+#define RETU_IOCX_WRITE                        _IO(URT_IOC_MAGIC, 2)
+#define RETU_IOCH_ADC_READ             _IO(URT_IOC_MAGIC, 3)
+
+/* TAHVO */
+#define TAHVO_IOCH_READ                        _IO(URT_IOC_MAGIC, 4)
+#define TAHVO_IOCX_WRITE               _IO(URT_IOC_MAGIC, 5)
+
+/* This structure is used for writing RETU/TAHVO registers */
+struct retu_tahvo_write_parms {
+    u32        field;
+    u16        value;
+    u8 result;
+};
+
+#endif