ARM: OMAP: Fix compile for beagle

Move twl4030 gpio init code to where it should be.
Also include twl4030.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 9e5ada01b5fab3e4c93d9a560b6c4ae561e141e3..38c88fbe658de56f20fe6711a8043aba18c1ee0a 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/i2c/twl4030.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
                unsigned gpio, unsigned ngpio)
 {
        /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+       omap_cfg_reg(AH8_34XX_GPIO29);
+       mmc[0].gpio_cd = gpio + 0;
+       twl4030_mmc_init(mmc);
 
        /* REVISIT: need ehci-omap hooks for external VBUS
         * power switch and overcurrent detect
@@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void)
        omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
        omap_serial_init();
 
-       omap_cfg_reg(AH8_34XX_GPIO29);
-       mmc[0].gpio_cd = gpio + 0;
-       twl4030_mmc_init(mmc);
-
        omap_cfg_reg(J25_34XX_GPIO170);
        gpio_request(170, "DVI_nPD");
        /* REVISIT leave DVI powered down until it's needed ... */