This enables support for the MIPS Technologies Malta evaluation
board.
-config MIPS_SEAD
- bool "MIPS SEAD board"
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_CPU
- select DMA_NONCOHERENT
- select SYS_HAS_EARLY_PRINTK
- select MIPS_BOARDS_GEN
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_CPU_MIPS64_R1
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_SMARTMIPS
- help
- This enables support for the MIPS Technologies SEAD evaluation
- board.
-
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select CEVT_R4K
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
all-$(CONFIG_MIPS_MALTA) := vmlinux.bin
-#
-# MIPS SEAD board
-#
-core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/
-cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD) := vmlinux.srec
-
#
# MIPS SIM
#
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MACH_JAZZ=y
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_LASAT=y
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
CONFIG_MIPS_MALTA=y
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
CONFIG_MIPS_SIM=y
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:28:10 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_SEAD=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=18432
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MACH_JAZZ is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MARKEINS is not set
CONFIG_MACH_VR41XX=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
CONFIG_WR_PPMC=y
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MOMENCO_JAGUAR_ATX is not set
#include <linux/serial_reg.h>
#include <asm/io.h>
-#if defined(CONFIG_MIPS_SEAD)
-
-#include <asm/mips-boards/sead.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (SEAD_UART0_REGS_BASE + ((offset)<<3))
-#else
-#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#else
#define PORT(offset) (0x3f8 + (offset))
-#endif
static inline unsigned int serial_in(int offset)
{
mips_display_message("LINUX");
-#ifdef CONFIG_MIPS_SEAD
- set_io_port_base(KSEG1);
-#else
/*
* early setup of _pcictrl_bonito so that we can determine
* the system controller on a CORE_EMUL board
mips_display_message("SC Error");
while (1); /* We die here... */
}
-#endif
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
{
_machine_restart = mips_machine_restart;
_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
+#ifdef CONFIG_MIPS_MALTA
pm_power_off = mips_machine_halt;
#endif
}
#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
unsigned long cpu_khz;
unsigned int prid = read_c0_prid() & 0xffff00;
unsigned int count;
-#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
+#ifdef CONFIG_MIPS_SIM
/*
* The SEAD board doesn't have a real time clock, so we can't
* really calculate the timer frequency
+++ /dev/null
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the MIPS SEAD specific kernel interface routines
-# under Linux.
-#
-
-obj-y := sead_int.o sead_setup.o
-
-EXTRA_CFLAGS += -Werror
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2004 Maciej W. Rozycki
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Sead board.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/mips-boards/seadint.h>
-
-static inline int clz(unsigned long x)
-{
- __asm__(
- " .set push \n"
- " .set mips32 \n"
- " clz %0, %1 \n"
- " .set pop \n"
- : "=r" (x)
- : "r" (x));
-
- return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- return -clz(pending) + 31 - CAUSEB_IP;
-#else
- unsigned int a0 = 7;
- unsigned int t0;
-
- t0 = s0 & 0xf000;
- t0 = t0 < 1;
- t0 = t0 << 2;
- a0 = a0 - t0;
- s0 = s0 << t0;
-
- t0 = s0 & 0xc000;
- t0 = t0 < 1;
- t0 = t0 << 1;
- a0 = a0 - t0;
- s0 = s0 << t0;
-
- t0 = s0 & 0x8000;
- t0 = t0 < 1;
- //t0 = t0 << 2;
- a0 = a0 - t0;
- //s0 = s0 << t0;
-
- return a0;
-#endif
-}
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 UART0 (hw0)
- * 3 UART1 (hw1)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
- int irq;
-
- irq = irq_ffs(pending);
-
- if (irq >= 0)
- do_IRQ(MIPS_CPU_IRQ_BASE + irq);
- else
- spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
-}
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * SEAD specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/sead.h>
-#include <asm/mips-boards/seadint.h>
-#include <asm/time.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
- return "MIPS SEAD";
-}
-
-const char display_string[] = " LINUX ON SEAD ";
-
-void __init plat_mem_setup(void)
-{
- ioport_resource.end = 0x7fffffff;
-
- serial_init();
-
- mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
- struct uart_port s;
-
- memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- s.iobase = SEAD_UART0_REGS_BASE;
-#else
- s.iobase = SEAD_UART0_REGS_BASE+3;
-#endif
- s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0;
- s.uartclk = SEAD_BASE_BAUD * 16;
- s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
- s.iotype = UPIO_PORT;
- s.regshift = 3;
-
- if (early_serial_setup(&s) != 0) {
- printk(KERN_ERR "Serial setup failed!\n");
- }
-#endif
-}
/*
* Display register base.
*/
-#ifdef CONFIG_MIPS_SEAD
-#define ASCII_DISPLAY_POS_BASE 0x1f0005c0
-#else
#define ASCII_DISPLAY_WORD_BASE 0x1f000410
#define ASCII_DISPLAY_POS_BASE 0x1f000418
-#endif
/*
/*
* Reset register.
*/
-#ifdef CONFIG_MIPS_SEAD
-#define SOFTRES_REG 0x1e800050
-#define GORESET 0x4d
-#else
#define SOFTRES_REG 0x1f000500
#define GORESET 0x42
-#endif
/*
* Revision register.
projects / linux-2.6-omap-h63xx.git / commitdiff