[ARM] Kirkwood: support L2 writeback mode

This patch allows booting Kirkwood with the L2 in writeback mode,
by reading the WT override bit from the L2 config register and
passing that into the Feroceon L2 init routine, instead of assuming
that the WT override bit will always be set

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index e73384fbbba8c9c9172c1f2ebe182bb4247b4e9a..5938a3b33cdc2c79357e375eecb60d1868d1cd24 100644 (file)
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -313,6 +313,11 @@ static char * __init kirkwood_id(void)
        return "unknown 88F6000 variant";
 }
 
+static int __init is_l2_writethrough(void)
+{
+       return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH);
+}
+
 void __init kirkwood_init(void)
 {
        printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
@@ -321,6 +326,6 @@ void __init kirkwood_init(void)
        kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
-       feroceon_l2_init(1);
+       feroceon_l2_init(is_l2_writethrough());
 #endif
 }

diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
index 520250dbd8a38eb89c0376649ccb9248b215e853..bb31b315c350ea36c60a1b567199db87dba369af 100644 (file)
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -49,7 +49,6 @@
 #define BRIDGE_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
 #define  CPU_CONTROL           (BRIDGE_VIRT_BASE | 0x0104)
 #define   CPU_RESET            0x00000002
-//#define   L2_WRITETHROUGH    0x00020000
 #define  RSTOUTn_MASK          (BRIDGE_VIRT_BASE | 0x0108)
 #define   SOFT_RESET_OUT_EN    0x00000004
 #define  SYSTEM_SOFT_RESET     (BRIDGE_VIRT_BASE | 0x010c)
@@ -65,6 +64,8 @@
 #define   IRQ_CAUSE_HIGH_OFF   0x0010
 #define   IRQ_MASK_HIGH_OFF    0x0014
 #define  TIMER_VIRT_BASE       (BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG         (BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH      0x00000010
 
 /*
  * Register Map