[MIPS] Kconfig: Provide sane NR_CPUS defaults for more configurations

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 21db07efd7a0c949014f6e44b35bdd3bf62864f9..44a0224c32ddbe39d30c3134b4d41766e95d4d0b 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -575,6 +575,7 @@ config SGI_IP27
        select DMA_IP27
        select EARLY_PRINTK
        select HW_HAS_PCI
+       select NR_CPUS_DEFAULT_64
        select PCI_DOMAINS
        select SYS_HAS_CPU_R10000
        select SYS_SUPPORTS_64BIT_KERNEL
@@ -612,6 +613,7 @@ config SIBYTE_BIGSUR
        bool "Sibyte BCM91480B-BigSur"
        select BOOT_ELF32
        select DMA_COHERENT
+       select NR_CPUS_DEFAULT_4
        select PCI_DOMAINS
        select SIBYTE_BCM1x80
        select SWAP_IO_SPACE
@@ -623,6 +625,7 @@ config SIBYTE_SWARM
        bool "Sibyte BCM91250A-SWARM"
        select BOOT_ELF32
        select DMA_COHERENT
+       select NR_CPUS_DEFAULT_2
        select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
@@ -635,6 +638,7 @@ config SIBYTE_SENTOSA
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
+       select NR_CPUS_DEFAULT_2
        select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
@@ -668,6 +672,7 @@ config SIBYTE_PTSWARM
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
+       select NR_CPUS_DEFAULT_2
        select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
@@ -680,6 +685,7 @@ config SIBYTE_LITTLESUR
        depends on EXPERIMENTAL
        select BOOT_ELF32
        select DMA_COHERENT
+       select NR_CPUS_DEFAULT_2
        select SIBYTE_SB1250
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_SB1
@@ -1524,6 +1530,8 @@ config MIPS_MT_SMTC
        select CPU_MIPSR2_IRQ_VI
        select CPU_MIPSR2_SRS
        select MIPS_MT
+       select NR_CPUS_DEFAULT_2
+       select NR_CPUS_DEFAULT_8
        select SMP
        select SYS_SUPPORTS_SMP
        help
@@ -1739,13 +1747,34 @@ config SMP
 config SYS_SUPPORTS_SMP
        bool
 
+config NR_CPUS_DEFAULT_2
+       bool
+
+config NR_CPUS_DEFAULT_4
+       bool
+
+config NR_CPUS_DEFAULT_8
+       bool
+
+config NR_CPUS_DEFAULT_16
+       bool
+
+config NR_CPUS_DEFAULT_32
+       bool
+
+config NR_CPUS_DEFAULT_64
+       bool
+
 config NR_CPUS
        int "Maximum number of CPUs (2-64)"
        range 2 64
        depends on SMP
-       default "64" if SGI_IP27
-       default "2"
-       default "8" if MIPS_MT_SMTC
+       default "2" if NR_CPUS_DEFAULT_2
+       default "4" if NR_CPUS_DEFAULT_4
+       default "8" if NR_CPUS_DEFAULT_8
+       default "16" if NR_CPUS_DEFAULT_16
+       default "32" if NR_CPUS_DEFAULT_32
+       default "64" if NR_CPUS_DEFAULT_64
        help
          This allows you to specify the maximum number of CPUs which this
          kernel will support.  The maximum supported value is 32 for 32-bit