]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] 3c59x: use mii_check_media
authorSteffen Klassert <klassert@mathematik.tu-chemnitz.de>
Sun, 26 Mar 2006 09:37:39 +0000 (01:37 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Sun, 26 Mar 2006 16:56:58 +0000 (08:56 -0800)
Check for media changes and netif_carrier by using mii_check_media() if mii is
used.

Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/net/3c59x.c

index d339308539fa828183788c16f22566a5c470c923..4ae78bf377cdb89a3123e5014f5ae0e316aa3b16 100644 (file)
@@ -1335,7 +1335,7 @@ static int __devinit vortex_probe1(struct device *gendev,
                        vp->enable_wol = 1;
        }
 
-       vp->force_fd = vp->full_duplex;
+       vp->mii.force_media = vp->full_duplex;
        vp->options = option;
        /* Read the station address from the EEPROM. */
        EL3WINDOW(0);
@@ -1624,6 +1624,46 @@ issue_and_wait(struct net_device *dev, int cmd)
                           dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
 }
 
+static void
+vortex_set_duplex(struct net_device *dev)
+{
+       struct vortex_private *vp = netdev_priv(dev);
+       void __iomem *ioaddr = vp->ioaddr;
+
+       printk(KERN_INFO "%s:  setting %s-duplex.\n",
+               dev->name, (vp->full_duplex) ? "full" : "half");
+
+       EL3WINDOW(3);
+       /* Set the full-duplex bit. */
+       iowrite16(((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+                       (vp->large_frames ? 0x40 : 0) |
+                       ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+                                       0x100 : 0),
+                       ioaddr + Wn3_MAC_Ctrl);
+
+       issue_and_wait(dev, TxReset);
+       /*
+        * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+        */
+       issue_and_wait(dev, RxReset|0x04);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+       struct vortex_private *vp = netdev_priv(dev);
+       unsigned int ok_to_print = 0;
+
+       if (vortex_debug > 3)
+               ok_to_print = 1;
+
+       if (mii_check_media(&vp->mii, ok_to_print, init)) {
+               vp->full_duplex = vp->mii.full_duplex;
+               vortex_set_duplex(dev);
+       } else if (init) {
+               vortex_set_duplex(dev);
+       }
+}
+
 static void
 vortex_up(struct net_device *dev)
 {
@@ -1684,53 +1724,20 @@ vortex_up(struct net_device *dev)
                printk(KERN_DEBUG "%s: Initial media type %s.\n",
                           dev->name, media_tbl[dev->if_port].name);
 
-       vp->full_duplex = vp->force_fd;
+       vp->full_duplex = vp->mii.force_media;
        config = BFINS(config, dev->if_port, 20, 4);
        if (vortex_debug > 6)
                printk(KERN_DEBUG "vortex_up(): writing 0x%x to InternalConfig\n", config);
        iowrite32(config, ioaddr + Wn3_Config);
 
+       netif_carrier_off(dev);
        if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
-               int mii_reg1, mii_reg5;
                EL3WINDOW(4);
-               /* Read BMSR (reg1) only to clear old status. */
-               mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
-               mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
-               if (mii_reg5 == 0xffff  ||  mii_reg5 == 0x0000) {
-                       netif_carrier_off(dev); /* No MII device or no link partner report */
-               } else {
-                       mii_reg5 &= vp->advertising;
-                       if ((mii_reg5 & 0x0100) != 0    /* 100baseTx-FD */
-                                || (mii_reg5 & 0x00C0) == 0x0040) /* 10T-FD, but not 100-HD */
-                       vp->full_duplex = 1;
-                       netif_carrier_on(dev);
-               }
-               vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
-               if (vortex_debug > 1)
-                       printk(KERN_INFO "%s: MII #%d status %4.4x, link partner capability %4.4x,"
-                                  " info1 %04x, setting %s-duplex.\n",
-                                       dev->name, vp->phys[0],
-                                       mii_reg1, mii_reg5,
-                                       vp->info1, ((vp->info1 & 0x8000) || vp->full_duplex) ? "full" : "half");
-               EL3WINDOW(3);
+               vortex_check_media(dev, 1);
        }
+       else
+               vortex_set_duplex(dev);
 
-       /* Set the full-duplex bit. */
-       iowrite16(      ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
-                       (vp->large_frames ? 0x40 : 0) |
-                       ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
-                       ioaddr + Wn3_MAC_Ctrl);
-
-       if (vortex_debug > 1) {
-               printk(KERN_DEBUG "%s: vortex_up() InternalConfig %8.8x.\n",
-                       dev->name, config);
-       }
-
-       issue_and_wait(dev, TxReset);
-       /*
-        * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
-        */
-       issue_and_wait(dev, RxReset|0x04);
 
        iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
 
@@ -1892,7 +1899,7 @@ vortex_timer(unsigned long data)
        void __iomem *ioaddr = vp->ioaddr;
        int next_tick = 60*HZ;
        int ok = 0;
-       int media_status, mii_status, old_window;
+       int media_status, old_window;
 
        if (vortex_debug > 2) {
                printk(KERN_DEBUG "%s: Media selection timer tick happened, %s.\n",
@@ -1924,44 +1931,9 @@ vortex_timer(unsigned long data)
                break;
        case XCVR_MII: case XCVR_NWAY:
                {
-                       spin_lock_bh(&vp->lock);
-                       mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
-                       if (!(mii_status & BMSR_LSTATUS)) {
-                               /* Re-read to get actual link status */
-                               mii_status = mdio_read(dev, vp->phys[0], MII_BMSR);
-                       }
                        ok = 1;
-                       if (vortex_debug > 2)
-                               printk(KERN_DEBUG "%s: MII transceiver has status %4.4x.\n",
-                                       dev->name, mii_status);
-                       if (mii_status & BMSR_LSTATUS) {
-                               int mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
-                               if (! vp->force_fd  &&  mii_reg5 != 0xffff) {
-                                       int duplex;
-
-                                       mii_reg5 &= vp->advertising;
-                                       duplex = (mii_reg5&0x0100) || (mii_reg5 & 0x01C0) == 0x0040;
-                                       if (vp->full_duplex != duplex) {
-                                               vp->full_duplex = duplex;
-                                               printk(KERN_INFO "%s: Setting %s-duplex based on MII "
-                                                       "#%d link partner capability of %4.4x.\n",
-                                                       dev->name, vp->full_duplex ? "full" : "half",
-                                                       vp->phys[0], mii_reg5);
-                                               /* Set the full-duplex bit. */
-                                               EL3WINDOW(3);
-                                               iowrite16(      (vp->full_duplex ? 0x20 : 0) |
-                                                               (vp->large_frames ? 0x40 : 0) |
-                                                               ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? 0x100 : 0),
-                                                               ioaddr + Wn3_MAC_Ctrl);
-                                               if (vortex_debug > 1)
-                                                       printk(KERN_DEBUG "Setting duplex in Wn3_MAC_Ctrl\n");
-                                               /* AKPM: bug: should reset Tx and Rx after setting Duplex.  Page 180 */
-                                       }
-                               }
-                               netif_carrier_on(dev);
-                       } else {
-                               netif_carrier_off(dev);
-                       }
+                       spin_lock_bh(&vp->lock);
+                       vortex_check_media(dev, 0);
                        spin_unlock_bh(&vp->lock);
                }
                break;