[PATCH] Update devices.txt

Update Documentation/devices.txt with a new version from the LANANA site
http://www.lanana.org/docs/device-list/devices-2.6+.txt

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Torben Mathiasen <device@lanana.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index b369a8c46a7311c8d5561d730a95a6049cee2ff2..b2f593fc76ca736a10941a5983dbbab3c8973afe 100644 (file)
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -3,7 +3,7 @@
 
             Maintained by Torben Mathiasen <device@lanana.org>
 
-                     Last revised: 25 January 2005
+                     Last revised: 01 March 2006
 
 This list is the Linux Device List, the official registry of allocated
 device numbers and /dev directory nodes for the Linux operating
@@ -94,7 +94,6 @@ Your cooperation is appreciated.
                  9 = /dev/urandom      Faster, less secure random number gen.
                 10 = /dev/aio          Asyncronous I/O notification interface
                 11 = /dev/kmsg         Writes to this come out as printk's
-                12 = /dev/oldmem       Access to crash dump from kexec kernel
   1 block      RAM disk
                  0 = /dev/ram0         First RAM disk
                  1 = /dev/ram1         Second RAM disk
@@ -262,13 +261,13 @@ Your cooperation is appreciated.
                NOTE: These devices permit both read and write access.
 
   7 block      Loopback devices
-                 0 = /dev/loop0        First loopback device
-                 1 = /dev/loop1        Second loopback device
+                 0 = /dev/loop0        First loop device
+                 1 = /dev/loop1        Second loop device
                    ...
 
-               The loopback devices are used to mount filesystems not
+               The loop devices are used to mount filesystems not
                associated with block devices.  The binding to the
-               loopback devices is handled by mount(8) or losetup(8).
+               loop devices is handled by mount(8) or losetup(8).
 
   8 block      SCSI disk devices (0-15)
                  0 = /dev/sda          First SCSI disk whole disk
@@ -943,7 +942,7 @@ Your cooperation is appreciated.
                240 = /dev/ftlp         FTL on 16th Memory Technology Device 
 
                Partitions are handled in the same way as for IDE
-               disks (see major number 3) expect that the partition
+               disks (see major number 3) except that the partition
                limit is 15 rather than 63 per disk (same as SCSI.)
 
  45 char       isdn4linux ISDN BRI driver
@@ -1168,7 +1167,7 @@ Your cooperation is appreciated.
                The filename of the encrypted container and the passwords
                are sent via ioctls (using the sdmount tool) to the master
                node which then activates them via one of the
-               /dev/scramdisk/x nodes for loopback mounting (all handled
+               /dev/scramdisk/x nodes for loop mounting (all handled
                through the sdmount tool).
 
                Requested by: andy@scramdisklinux.org
@@ -2538,18 +2537,32 @@ Your cooperation is appreciated.
                  0 = /dev/usb/lp0      First USB printer
                    ...
                 15 = /dev/usb/lp15     16th USB printer
-                16 = /dev/usb/mouse0   First USB mouse
-                   ...
-                31 = /dev/usb/mouse15  16th USB mouse
-                32 = /dev/usb/ez0      First USB firmware loader
-                   ...
-                47 = /dev/usb/ez15     16th USB firmware loader
                 48 = /dev/usb/scanner0 First USB scanner
                    ...
                 63 = /dev/usb/scanner15 16th USB scanner
                 64 = /dev/usb/rio500   Diamond Rio 500
                 65 = /dev/usb/usblcd   USBLCD Interface (info@usblcd.de)
                 66 = /dev/usb/cpad0    Synaptics cPad (mouse/LCD)
+                96 = /dev/usb/hiddev0  1st USB HID device
+                   ...
+               111 = /dev/usb/hiddev15 16th USB HID device
+               112 = /dev/usb/auer0    1st auerswald ISDN device
+                   ...
+               127 = /dev/usb/auer15   16th auerswald ISDN device
+               128 = /dev/usb/brlvgr0  First Braille Voyager device
+                   ...
+               131 = /dev/usb/brlvgr3  Fourth Braille Voyager device
+               132 = /dev/usb/idmouse  ID Mouse (fingerprint scanner) device
+               133 = /dev/usb/sisusbvga1       First SiSUSB VGA device
+                   ...
+               140 = /dev/usb/sisusbvga8       Eigth SISUSB VGA device
+               144 = /dev/usb/lcd      USB LCD device
+               160 = /dev/usb/legousbtower0    1st USB Legotower device
+                   ...
+               175 = /dev/usb/legousbtower15   16th USB Legotower device
+               240 = /dev/usb/dabusb0  First daubusb device
+                   ...
+               243 = /dev/usb/dabusb3  Fourth dabusb device
 
 180 block      USB block devices
                0 = /dev/uba            First USB block device
@@ -2710,6 +2723,17 @@ Your cooperation is appreciated.
                  1 = /dev/cpu/1/msr            MSRs on CPU 1
                    ...
 
+202 block      Xen Virtual Block Device
+                 0 = /dev/xvda       First Xen VBD whole disk
+                 16 = /dev/xvdb      Second Xen VBD whole disk
+                 32 = /dev/xvdc      Third Xen VBD whole disk
+                   ...
+                 240 = /dev/xvdp     Sixteenth Xen VBD whole disk
+
+                Partitions are handled in the same way as for IDE
+                disks (see major number 3) except that the limit on
+                partitions is 15.
+
 203 char       CPU CPUID information
                  0 = /dev/cpu/0/cpuid          CPUID on CPU 0
                  1 = /dev/cpu/1/cpuid          CPUID on CPU 1
@@ -2747,11 +2771,26 @@ Your cooperation is appreciated.
                 46 = /dev/ttyCPM0              PPC CPM (SCC or SMC) - port 0
                    ...
                 47 = /dev/ttyCPM5              PPC CPM (SCC or SMC) - port 5
-                50 = /dev/ttyIOC40             Altix serial card
+                50 = /dev/ttyIOC0              Altix serial card
+                   ...
+                81 = /dev/ttyIOC31             Altix serial card
+                82 = /dev/ttyVR0               NEC VR4100 series SIU
+                83 = /dev/ttyVR1               NEC VR4100 series DSIU
+                84 = /dev/ttyIOC84             Altix ioc4 serial card
+                   ...
+                115 = /dev/ttyIOC115           Altix ioc4 serial card
+                116 = /dev/ttySIOC0            Altix ioc3 serial card
+                   ...
+                147 = /dev/ttySIOC31           Altix ioc3 serial card
+                148 = /dev/ttyPSC0             PPC PSC - port 0
+                   ...
+                153 = /dev/ttyPSC5             PPC PSC - port 5
+                154 = /dev/ttyAT0              ATMEL serial port 0
                    ...
-                81 = /dev/ttyIOC431            Altix serial card
-                82 = /dev/ttyVR0               NEC VR4100 series SIU
-                83 = /dev/ttyVR1               NEC VR4100 series DSIU
+                169 = /dev/ttyAT15             ATMEL serial port 15
+                170 = /dev/ttyNX0              Hilscher netX serial port 0
+                   ...
+                185 = /dev/ttyNX15             Hilscher netX serial port 15
 
 205 char       Low-density serial ports (alternate device)
                  0 = /dev/culu0                Callout device for ttyLU0
@@ -2786,8 +2825,8 @@ Your cooperation is appreciated.
                 50 = /dev/cuioc40              Callout device for ttyIOC40
                    ...
                 81 = /dev/cuioc431             Callout device for ttyIOC431
-                82 = /dev/cuvr0                Callout device for ttyVR0
-                83 = /dev/cuvr1                Callout device for ttyVR1
+                82 = /dev/cuvr0                Callout device for ttyVR0
+                83 = /dev/cuvr1                Callout device for ttyVR1
 
 
 206 char       OnStream SC-x0 tape devices
@@ -2897,7 +2936,6 @@ Your cooperation is appreciated.
                    ...
                196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
 
-
 216 char       Bluetooth RFCOMM TTY devices
                  0 = /dev/rfcomm0              First Bluetooth RFCOMM TTY device
                  1 = /dev/rfcomm1              Second Bluetooth RFCOMM TTY device
@@ -3002,12 +3040,43 @@ Your cooperation is appreciated.
                ioctl()'s can be used to rewind the tape regardless of
                the device used to access it.
 
-231 char       InfiniBand MAD
+231 char       InfiniBand
                0 = /dev/infiniband/umad0
                1 = /dev/infiniband/umad1
-                ...
+                 ...
+               63 = /dev/infiniband/umad63    63rd InfiniBandMad device
+               64 = /dev/infiniband/issm0     First InfiniBand IsSM device
+               65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
+                 ...
+               127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
+               128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+               129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+                 ...
+               159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+
+232 char       Biometric Devices
+               0 = /dev/biometric/sensor0/fingerprint  first fingerprint sensor on first device
+               1 = /dev/biometric/sensor0/iris         first iris sensor on first device
+               2 = /dev/biometric/sensor0/retina       first retina sensor on first device
+               3 = /dev/biometric/sensor0/voiceprint   first voiceprint sensor on first device
+               4 = /dev/biometric/sensor0/facial       first facial sensor on first device
+               5 = /dev/biometric/sensor0/hand         first hand sensor on first device
+                 ...
+               10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
+                 ...
+               20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
+                 ...
 
-232-239                UNASSIGNED
+233 char       PathScale InfiniPath interconnect
+               0 = /dev/ipath        Primary device for programs (any unit)
+               1 = /dev/ipath0       Access specifically to unit 0
+               2 = /dev/ipath1       Access specifically to unit 1
+                 ...
+               4 = /dev/ipath3       Access specifically to unit 3
+               129 = /dev/ipath_sma    Device used by Subnet Management Agent
+               130 = /dev/ipath_diag   Device used by diagnostics programs
+
+234-239                UNASSIGNED
 
 240-254 char   LOCAL/EXPERIMENTAL USE
 240-254 block  LOCAL/EXPERIMENTAL USE
@@ -3021,6 +3090,24 @@ Your cooperation is appreciated.
                This major is reserved to assist the expansion to a
                larger number space.  No device nodes with this major
                should ever be created on the filesystem.
+               (This is probaly not true anymore, but I'll leave it
+               for now /Torben)
+
+---LARGE MAJORS!!!!!---
+
+256 char       Equinox SST multi-port serial boards
+                  0 = /dev/ttyEQ0      First serial port on first Equinox SST board
+                127 = /dev/ttyEQ127    Last serial port on first Equinox SST board
+                128 = /dev/ttyEQ128    First serial port on second Equinox SST board
+                 ...
+               1027 = /dev/ttyEQ1027   Last serial port on eighth Equinox SST board
+
+256 block      Resident Flash Disk Flash Translation Layer
+                 0 = /dev/rfda         First RFD FTL layer
+                16 = /dev/rfdb         Second RFD FTL layer
+                 ...
+               240 = /dev/rfdp         16th RFD FTL layer
+
 
  ****  ADDITIONAL /dev DIRECTORY ENTRIES