]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
Blackfin arch: Fix bug set correct baud for spi mmc and enable SPI after DMA.
authorSonic Zhang <sonic.zhang@analog.com>
Tue, 30 Oct 2007 03:48:42 +0000 (11:48 +0800)
committerBryan Wu <bryan.wu@analog.com>
Tue, 30 Oct 2007 03:48:42 +0000 (11:48 +0800)
Changes:

1. The baud for spi mmc defined in board file is not used by the old
spi driver. A slower value from spi framework is used instead. In latest
bug fixing, the correct baud is use which is too high for spi MMC card.

2. SPI is enabled only after DMA is started.

3. MMC detection IRQ is set to 55.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
arch/blackfin/mach-bf533/boards/stamp.c
arch/blackfin/mach-bf537/boards/stamp.c

index f84be4eabfd1985af425717cfeb353c48ecd60a6..62ffa500420fa0aef18ccf0caad1d6d3d050b795 100644 (file)
@@ -218,7 +218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
        {
                .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = 0,
                .platform_data = NULL,
@@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
        {
                .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                .platform_data = NULL,
index cc41f6c2ef4f515c65f5e4f99b3e027b41d96045..c18d85e8a0b6ea77546aeba23ebaa3b4c761802c 100644 (file)
@@ -450,7 +450,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
        {
                .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = 0,
                .platform_data = NULL,
@@ -459,7 +459,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
        {
                .modalias = "spi_mmc",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                .platform_data = NULL,