USB: new ftdi_sio device id

Here is a patch that adds support for the propox jtagcable II dongle
(http://www.propox.com/products/t_117.html): their PID was missing,
therefore we were not able to have the device recognized though it uses
a standard FTDI chip.

Signed-off-by: Mirko Bordignon <mirko.bordignon@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 91dc433dbcf14048488239bc42a788024eadc32a..3abb3c863647832a31937fb3363f415f4a344ed9 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -359,6 +359,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
        { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
        { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
        { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index e1eb742abcd5d081f467b01263a5bf45f26f54b3..6da539ede0ee992185ccb4b789b28f485bc39024 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -557,6 +557,9 @@
 #define TML_VID                        0x1B91  /* Vendor ID */
 #define TML_USB_SERIAL_PID     0x0064  /* USB - Serial Converter */
 
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID    0xD738
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */