avr32: Enable pullup on USART TX lines

Make USART initialization conform to Section 24.6.1 in the AT32AP7000 manual,
i.e. "To prevent the TXD line from falling when the USART is disabled, the use
of an internal pull up is mandatory."

Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se>
[haavard.skinnemoen@atmel.com: enable pullup on RX as well]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 0c6e02f80a31ce6cd562aa2147d0144a3e89b913..066252eebf614e98ffb96c1c58705cbb9e35840b 100644 (file)
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void)
 {
        u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
 
-       select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart1_pins(void)
 {
        u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
 
-       select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+       select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart2_pins(void)
 {
        u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
 
-       select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart3_pins(void)
 {
        u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
 
-       select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+       select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static struct platform_device *__initdata at32_usarts[4];