]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[netdrvr] ns83820: add ethtool media support
authorJeff Garzik <jeff@garzik.org>
Tue, 14 Aug 2007 05:24:56 +0000 (01:24 -0400)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:50:26 +0000 (16:50 -0700)
Split out from patch authored by Dan Faerch <dan@hacker.dk>.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/ns83820.c

index ea80e6cb3dec1600ba4b5baecba4f4d56c612bba..6e65d61a3fe08f4528f7e36771f36283abd1dc97 100644 (file)
@@ -1,4 +1,4 @@
-#define VERSION "0.22"
+#define VERSION "0.23"
 /* ns83820.c by Benjamin LaHaise with contributions.
  *
  * Questions/comments/discussion to linux-ns83820@kvack.org.
@@ -1247,6 +1247,149 @@ static struct net_device_stats *ns83820_get_stats(struct net_device *ndev)
        return &dev->stats;
 }
 
+/* Let ethtool retrieve info */
+static int ns83820_get_settings(struct net_device *ndev,
+                               struct ethtool_cmd *cmd)
+{
+       struct ns83820 *dev = PRIV(ndev);
+       u32 cfg, tanar, tbicr;
+       int have_optical = 0;
+       int fullduplex   = 0;
+
+       /*
+        * Here's the list of available ethtool commands from other drivers:
+        *      cmd->advertising =
+        *      cmd->speed =
+        *      cmd->duplex =
+        *      cmd->port = 0;
+        *      cmd->phy_address =
+        *      cmd->transceiver = 0;
+        *      cmd->autoneg =
+        *      cmd->maxtxpkt = 0;
+        *      cmd->maxrxpkt = 0;
+        */
+
+       /* read current configuration */
+       cfg   = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+       tanar = readl(dev->base + TANAR);
+       tbicr = readl(dev->base + TBICR);
+
+       if (dev->CFG_cache & CFG_TBI_EN) {
+               /* we have an optical interface */
+               have_optical = 1;
+               fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0;
+
+       } else {
+               /* We have copper */
+               fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0;
+        }
+
+       cmd->supported = SUPPORTED_Autoneg;
+
+       /* we have optical interface */
+       if (dev->CFG_cache & CFG_TBI_EN) {
+               cmd->supported |= SUPPORTED_1000baseT_Half |
+                                       SUPPORTED_1000baseT_Full |
+                                       SUPPORTED_FIBRE;
+               cmd->port       = PORT_FIBRE;
+       } /* TODO: else copper related  support */
+
+       cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF;
+       switch (cfg / CFG_SPDSTS0 & 3) {
+       case 2:
+               cmd->speed = SPEED_1000;
+               break;
+       case 1:
+               cmd->speed = SPEED_100;
+               break;
+       default:
+               cmd->speed = SPEED_10;
+               break;
+       }
+       cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) ? 1: 0;
+       return 0;
+}
+
+/* Let ethool change settings*/
+static int ns83820_set_settings(struct net_device *ndev,
+                               struct ethtool_cmd *cmd)
+{
+       struct ns83820 *dev = PRIV(ndev);
+       u32 cfg, tanar;
+       int have_optical = 0;
+       int fullduplex   = 0;
+
+       /* read current configuration */
+       cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+       tanar = readl(dev->base + TANAR);
+
+       if (dev->CFG_cache & CFG_TBI_EN) {
+               /* we have optical */
+               have_optical = 1;
+               fullduplex   = (tanar & TANAR_FULL_DUP);
+
+       } else {
+               /* we have copper */
+               fullduplex = cfg & CFG_DUPSTS;
+       }
+
+       spin_lock_irq(&dev->misc_lock);
+       spin_lock(&dev->tx_lock);
+
+       /* Set duplex */
+       if (cmd->duplex != fullduplex) {
+               if (have_optical) {
+                       /*set full duplex*/
+                       if (cmd->duplex == DUPLEX_FULL) {
+                               /* force full duplex */
+                               writel(readl(dev->base + TXCFG)
+                                       | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
+                                       dev->base + TXCFG);
+                               writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+                                       dev->base + RXCFG);
+                               /* Light up full duplex LED */
+                               writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
+                                       dev->base + GPIOR);
+                       } else {
+                               /*TODO: set half duplex */
+                       }
+
+               } else {
+                       /*we have copper*/
+                       /* TODO: Set duplex for copper cards */
+               }
+               printk(KERN_INFO "%s: Duplex set via ethtool\n",
+               ndev->name);
+       }
+
+       /* Set autonegotiation */
+       if (1) {
+               if (cmd->autoneg == AUTONEG_ENABLE) {
+                       /* restart auto negotiation */
+                       writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
+                               dev->base + TBICR);
+                       writel(TBICR_MR_AN_ENABLE, dev->base + TBICR);
+                               dev->linkstate = LINK_AUTONEGOTIATE;
+
+                       printk(KERN_INFO "%s: autoneg enabled via ethtool\n",
+                               ndev->name);
+               } else {
+                       /* disable auto negotiation */
+                       writel(0x00000000, dev->base + TBICR);
+               }
+
+               printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name,
+                               cmd->autoneg ? "ENABLED" : "DISABLED");
+       }
+
+       phy_intr(ndev);
+       spin_unlock(&dev->tx_lock);
+       spin_unlock_irq(&dev->misc_lock);
+
+       return 0;
+}
+/* end ethtool get/set support -df */
+
 static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
 {
        struct ns83820 *dev = PRIV(ndev);
@@ -1263,8 +1406,10 @@ static u32 ns83820_get_link(struct net_device *ndev)
 }
 
 static const struct ethtool_ops ops = {
-       .get_drvinfo = ns83820_get_drvinfo,
-       .get_link = ns83820_get_link
+       .get_settings    = ns83820_get_settings,
+       .set_settings    = ns83820_set_settings,
+       .get_drvinfo     = ns83820_get_drvinfo,
+       .get_link        = ns83820_get_link
 };
 
 /* this function is called in irq context from the ISR */