]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] e1000: Fix collision distance
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>
Fri, 13 Jan 2006 00:51:05 +0000 (16:51 -0800)
committerJeff Garzik <jgarzik@pobox.com>
Tue, 17 Jan 2006 12:44:51 +0000 (07:44 -0500)
Fixed the collision distance for 82543 controllers and newer.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/e1000/e1000_hw.c
drivers/net/e1000/e1000_hw.h
drivers/net/e1000/e1000_main.c

index f79d2a06ee7fbd3dd3d4593d4674232c5f1b4aee..ac227c7847ffdefda0288202b91977db28e53cf2 100644 (file)
@@ -1933,14 +1933,19 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw)
 void
 e1000_config_collision_dist(struct e1000_hw *hw)
 {
-    uint32_t tctl;
+    uint32_t tctl, coll_dist;
 
     DEBUGFUNC("e1000_config_collision_dist");
 
+    if (hw->mac_type < e1000_82543)
+        coll_dist = E1000_COLLISION_DISTANCE_82542;
+    else
+        coll_dist = E1000_COLLISION_DISTANCE;
+
     tctl = E1000_READ_REG(hw, TCTL);
 
     tctl &= ~E1000_TCTL_COLD;
-    tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+    tctl |= coll_dist << E1000_COLD_SHIFT;
 
     E1000_WRITE_REG(hw, TCTL, tctl);
     E1000_WRITE_FLUSH(hw);
index 1ddfd56fc5df31453bf6ce67c87fae19207b45be..600570ff254b5228211118a3475614617a802560 100644 (file)
@@ -2078,7 +2078,10 @@ struct e1000_host_command_info {
 /* Collision related configuration parameters */
 #define E1000_COLLISION_THRESHOLD       15
 #define E1000_CT_SHIFT                  4
-#define E1000_COLLISION_DISTANCE        64
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE        63
+#define E1000_COLLISION_DISTANCE_82542  64
 #define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
 #define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
 #define E1000_COLD_SHIFT                12
index d2e77ee103bb3ebc89852ebd1ec13757adf15ab6..36b04d42252f0248d3ba0affceefd3ba17b132b2 100644 (file)
@@ -1342,6 +1342,7 @@ e1000_configure_tx(struct e1000_adapter *adapter)
        uint64_t tdba;
        struct e1000_hw *hw = &adapter->hw;
        uint32_t tdlen, tctl, tipg, tarc;
+       uint32_t ipgr1, ipgr2;
 
        /* Setup the HW Tx Head and Tail descriptor pointers */
 
@@ -1375,22 +1376,26 @@ e1000_configure_tx(struct e1000_adapter *adapter)
 
        /* Set the default values for the Tx Inter Packet Gap timer */
 
+       if (hw->media_type == e1000_media_type_fiber ||
+           hw->media_type == e1000_media_type_internal_serdes)
+               tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+       else
+               tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
        switch (hw->mac_type) {
        case e1000_82542_rev2_0:
        case e1000_82542_rev2_1:
                tipg = DEFAULT_82542_TIPG_IPGT;
-               tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-               tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+               ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+               ipgr2 = DEFAULT_82542_TIPG_IPGR2;
                break;
        default:
-               if (hw->media_type == e1000_media_type_fiber ||
-                   hw->media_type == e1000_media_type_internal_serdes)
-                       tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
-               else
-                       tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-               tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT;
-               tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT;
+               ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+               ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+               break;
        }
+       tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+       tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
        E1000_WRITE_REG(hw, TIPG, tipg);
 
        /* Set the Tx Interrupt Delay register */
@@ -1600,7 +1605,10 @@ e1000_setup_rctl(struct e1000_adapter *adapter)
                E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
                (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
 
-       if(adapter->hw.tbi_compatibility_on == 1)
+       if (adapter->hw.mac_type > e1000_82543)
+               rctl |= E1000_RCTL_SECRC;
+
+       if (adapter->hw.tbi_compatibility_on == 1)
                rctl |= E1000_RCTL_SBP;
        else
                rctl &= ~E1000_RCTL_SBP;