--- /dev/null
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR (0x3F0)
+#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY 0x55
+#define SMSC_EXIT_CONFIG_KEY 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
+#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
+#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
+#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+ outb((index), SMSC_INDEX_PORT_ADDR); \
+ outb((val), SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
+#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
+#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
+#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE 0x03f8
+#define SERIAL2_PRIMARY_BASE 0x02f8
+
+#define MSB(x) ( (x) >> 8 )
+#define LSB(x) ( (x) & 0xff )
+
+ /* General-Purpose base address on CPU-board FPGA */
+#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+ unsigned char devid, devrev;
+
+ /* Initially the chip is in run state */
+ /* Put it into configuration state */
+ outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ /* Read device ID info */
+ devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+ devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+ if ((devid == 0x30) && (devrev == 0x01))
+ printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+ else
+ return -ENODEV;
+
+ /* Select the keyboard device */
+ SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+ /* Select the Serial #1 device */
+ SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the Serial #2 device */
+ SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+ /* enable the interrupts */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the IDE#1 device */
+ SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+ SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+ /* select the interrupt */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the IDE#2 device */
+ SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+ /* enable it */
+ SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+ /* program with port addresses */
+ SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+ SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+ SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+ /* select the interrupt */
+ SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+ /* Select the configuration registers */
+ SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+ /* enable the appropriate GPIO pins for IDE functionality:
+ * bit[0] In/Out 1==input; 0==output
+ * bit[1] Polarity 1==invert; 0==no invert
+ * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
+ * bit[3:4] Function Select 00==original; 01==Alternate Function #1
+ */
+ SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+ SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+ SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+ SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+ SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
+
+ /* Exit the configuration state */
+ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+ return 0;
+}
+device_initcall(smsc_superio_setup);
#include <mach/microdev.h>
#include <asm/io.h>
#include <asm/machvec.h>
-
- /*
- * Setup for the SMSC FDC37C93xAPM
- */
-#define SMSC_CONFIG_PORT_ADDR (0x3F0)
-#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY 0x55
-#define SMSC_EXIT_CONFIG_KEY 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
-#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
-#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
-#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
- outb((index), SMSC_INDEX_PORT_ADDR); \
- outb((val), SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
-#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
-#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
-#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE 0x03f8
-#define SERIAL2_PRIMARY_BASE 0x02f8
-
-#define MSB(x) ( (x) >> 8 )
-#define LSB(x) ( (x) & 0xff )
-
- /* General-Purpose base address on CPU-board FPGA */
-#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
-
- /* assume a Keyboard Controller is present */
-int microdev_kbd_controller_present = 1;
+#include <asm/sizes.h>
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
- .end = 0x300 + 0x0001000 - 1,
+ .end = 0x300 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.resource = smc91x_resources,
};
-#ifdef CONFIG_FB_S1D13XXX
static struct s1d13xxxfb_regval s1d13806_initregs[] = {
{ S1DREG_MISC, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x00 },
static struct resource s1d13806_resources[] = {
[0] = {
.start = 0x07200000,
- .end = 0x07200000 + 0x00200000 - 1,
+ .end = 0x07200000 + SZ_2M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x07000000,
- .end = 0x07000000 + 0x00200000 - 1,
+ .end = 0x07000000 + SZ_2M - 1,
.flags = IORESOURCE_MEM,
},
};
.platform_data = &s1d13806_platform_data,
},
};
-#endif
static struct platform_device *microdev_devices[] __initdata = {
&smc91x_device,
-#ifdef CONFIG_FB_S1D13XXX
&s1d13806_device,
-#endif
};
static int __init microdev_devices_setup(void)
{
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
-
-/*
- * Setup for the SMSC FDC37C93xAPM
- */
-static int __init smsc_superio_setup(void)
-{
-
- unsigned char devid, devrev;
-
- /* Initially the chip is in run state */
- /* Put it into configuration state */
- outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- /* Read device ID info */
- devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
- devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
- if ( (devid==0x30) && (devrev==0x01) )
- {
- printk("SMSC FDC37C93xAPM SuperIO device detected\n");
- }
- else
- { /* not the device identity we expected */
- printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
- devid, devrev);
- /* inform the keyboard driver that we have no keyboard controller */
- microdev_kbd_controller_present = 0;
- /* little point in doing anything else in this functon */
- return 0;
- }
-
- /* Select the keyboard device */
- SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
- /* Select the Serial #1 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the Serial #2 device */
- SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
- /* enable the interrupts */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#1 device */
- SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
- SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the IDE#2 device */
- SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
- /* enable it */
- SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
- /* program with port addresses */
- SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
- SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
- SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
- /* select the interrupt */
- SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
- /* Select the configuration registers */
- SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
- /* enable the appropriate GPIO pins for IDE functionality:
- * bit[0] In/Out 1==input; 0==output
- * bit[1] Polarity 1==invert; 0==no invert
- * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
- * bit[3:4] Function Select 00==original; 01==Alternate Function #1
- */
- SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
- SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
- SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
- SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
- SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
-
- /* Exit the configuration state */
- outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
- return 0;
-}
-
-static void __init microdev_setup(char **cmdline_p)
-{
- int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
- const int fpgaRevision = *fpgaRevisionRegister;
- int * const CacheControlRegister = (int*)CCR;
-
- device_initcall(microdev_devices_setup);
- device_initcall(smsc_superio_setup);
-
- printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
- get_system_type(), fpgaRevision, *CacheControlRegister);
-}
+device_initcall(microdev_devices_setup);
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
- .mv_setup = microdev_setup,
- .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
+ .mv_nr_irqs = 72,
.mv_inb = microdev_inb,
.mv_inw = microdev_inw,
projects / linux-2.6-omap-h63xx.git / commitdiff