]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ide: HPA detect from resume
authorLee Trager <lt73@cs.drexel.edu>
Fri, 8 Jun 2007 13:14:30 +0000 (15:14 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Fri, 8 Jun 2007 13:14:30 +0000 (15:14 +0200)
Currently when system which have HPA require HPA to be detected and
disabled upon resume from RAM or disk. The current IDE drivers do not do
this nor does libata (obviously it since it doesn't support HPA yet).

I have implemented this into the current IDE drivers and it has been
tested by many others since 7/15/2006 in bug number 6840:

http://bugzilla.kernel.org/show_bug.cgi?id=6840

and it has been confirmed to work fine with no problems.

bart: added drv != NULL check to generic_ide_suspend()

From: Lee Trager <lt73@cs.drexel.edu>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-disk.c
drivers/ide/ide.c
include/linux/ide.h

index 7fff773f2df77ece16e19644346c771b6864516b..dc2175c81f5efe5c955729efd5b23b22c612d48e 100644 (file)
@@ -1037,6 +1037,17 @@ static void ide_disk_release(struct kref *kref)
 
 static int ide_disk_probe(ide_drive_t *drive);
 
+/*
+ * On HPA drives the capacity needs to be
+ * reinitilized on resume otherwise the disk
+ * can not be used and a hard reset is required
+ */
+static void ide_disk_resume(ide_drive_t *drive)
+{
+       if (idedisk_supports_hpa(drive->id))
+               init_idedisk_capacity(drive);
+}
+
 static void ide_device_shutdown(ide_drive_t *drive)
 {
 #ifdef CONFIG_ALPHA
@@ -1071,6 +1082,7 @@ static ide_driver_t idedisk_driver = {
        },
        .probe                  = ide_disk_probe,
        .remove                 = ide_disk_remove,
+       .resume                 = ide_disk_resume,
        .shutdown               = ide_device_shutdown,
        .version                = IDEDISK_VERSION,
        .media                  = ide_disk,
index 6002713a20a1bdfbcf9f7e2a3f000d491baa6802..0af0d1614f7553350a737edce67b0c931352fec1 100644 (file)
@@ -1010,9 +1010,11 @@ static int generic_ide_resume(struct device *dev)
 {
        ide_drive_t *drive = dev->driver_data;
        ide_hwif_t *hwif = HWIF(drive);
+       ide_driver_t *drv = to_ide_driver(dev->driver);
        struct request rq;
        struct request_pm_state rqpm;
        ide_task_t args;
+       int err;
 
        /* Call ACPI _STM only once */
        if (!(drive->dn % 2))
@@ -1029,7 +1031,12 @@ static int generic_ide_resume(struct device *dev)
        rqpm.pm_step = ide_pm_state_start_resume;
        rqpm.pm_state = PM_EVENT_ON;
 
-       return ide_do_drive_cmd(drive, &rq, ide_head_wait);
+       err = ide_do_drive_cmd(drive, &rq, ide_head_wait);
+
+       if (err == 0 && drv && drv->resume)
+               drv->resume(drive);
+
+       return err;
 }
 
 int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
index 07aba87d369db7d87c781ab5ebe66eda07985875..1e365acdd36922dafcfc0a8b287a5368c5b9c9c2 100644 (file)
@@ -1001,6 +1001,7 @@ struct ide_driver_s {
        struct device_driver    gen_driver;
        int             (*probe)(ide_drive_t *);
        void            (*remove)(ide_drive_t *);
+       void            (*resume)(ide_drive_t *);
        void            (*shutdown)(ide_drive_t *);
 #ifdef CONFIG_IDE_PROC_FS
        ide_proc_entry_t        *proc;