]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] Add mktree utility to arch/powerpc/boot
authorJosh Boyer <jwboyer@linux.vnet.ibm.com>
Fri, 13 Oct 2006 15:07:01 +0000 (10:07 -0500)
committerPaul Mackerras <paulus@samba.org>
Tue, 24 Oct 2006 05:01:27 +0000 (15:01 +1000)
This patch adds the mktree program that is needed to post process zImage
wrappers for various PowerPC 4xx boards

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/boot/Makefile
arch/powerpc/boot/mktree.c [new file with mode: 0644]

index 9731c25c54a100f1ff1940f3f682c30134031b01..1e71a452b17ffba4fe1171a50aafa6e3064ca67d 100644 (file)
@@ -94,13 +94,13 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
 $(obj)/wrapper.a: $(obj-wlib)
        $(call cmd,bootar)
 
-hostprogs-y    := addnote addRamDisk hack-coff
+hostprogs-y    := addnote addRamDisk hack-coff mktree
 
 extra-y                := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
                   $(obj)/zImage.lds $(obj)/zImage.coff.lds
 
 wrapper                :=$(srctree)/$(src)/wrapper
-wrapperbits    := $(extra-y) $(addprefix $(obj)/,addnote hack-coff)
+wrapperbits    := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree)
 
 #############
 # Bits for building various flavours of zImage
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
new file mode 100644 (file)
index 0000000..4cb8929
--- /dev/null
@@ -0,0 +1,152 @@
+/*
+ * Makes a tree bootable image for IBM Evaluation boards.
+ * Basically, just take a zImage, skip the ELF header, and stuff
+ * a 32 byte header on the front.
+ *
+ * We use htonl, which is a network macro, to make sure we're doing
+ * The Right Thing on an LE machine.  It's non-obvious, but it should
+ * work on anything BSD'ish.
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <netinet/in.h>
+#ifdef __sun__
+#include <inttypes.h>
+#else
+#include <stdint.h>
+#endif
+
+/* This gets tacked on the front of the image.  There are also a few
+ * bytes allocated after the _start label used by the boot rom (see
+ * head.S for details).
+ */
+typedef struct boot_block {
+       uint32_t bb_magic;              /* 0x0052504F */
+       uint32_t bb_dest;               /* Target address of the image */
+       uint32_t bb_num_512blocks;      /* Size, rounded-up, in 512 byte blks */
+       uint32_t bb_debug_flag; /* Run debugger or image after load */
+       uint32_t bb_entry_point;        /* The image address to start */
+       uint32_t bb_checksum;   /* 32 bit checksum including header */
+       uint32_t reserved[2];
+} boot_block_t;
+
+#define IMGBLK 512
+char   tmpbuf[IMGBLK];
+
+int main(int argc, char *argv[])
+{
+       int     in_fd, out_fd;
+       int     nblks, i;
+       uint    cksum, *cp;
+       struct  stat    st;
+       boot_block_t    bt;
+
+       if (argc < 3) {
+               fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
+               exit(1);
+       }
+
+       if (stat(argv[1], &st) < 0) {
+               perror("stat");
+               exit(2);
+       }
+
+       nblks = (st.st_size + IMGBLK) / IMGBLK;
+
+       bt.bb_magic = htonl(0x0052504F);
+
+       /* If we have the optional entry point parameter, use it */
+       if (argc == 4)
+               bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
+       else
+               bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
+
+       /* We know these from the linker command.
+        * ...and then move it up into memory a little more so the
+        * relocation can happen.
+        */
+       bt.bb_num_512blocks = htonl(nblks);
+       bt.bb_debug_flag = 0;
+
+       bt.bb_checksum = 0;
+
+       /* To be neat and tidy :-).
+       */
+       bt.reserved[0] = 0;
+       bt.reserved[1] = 0;
+
+       if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
+               perror("zImage open");
+               exit(3);
+       }
+
+       if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
+               perror("bootfile open");
+               exit(3);
+       }
+
+       cksum = 0;
+       cp = (void *)&bt;
+       for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+               cksum += *cp++;
+
+       /* Assume zImage is an ELF file, and skip the 64K header.
+       */
+       if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+               fprintf(stderr, "%s is too small to be an ELF image\n",
+                               argv[1]);
+               exit(4);
+       }
+
+       if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+               fprintf(stderr, "%s is not an ELF image\n", argv[1]);
+               exit(4);
+       }
+
+       if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
+               fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
+               exit(4);
+       }
+
+       nblks -= (64 * 1024) / IMGBLK;
+
+       /* And away we go......
+       */
+       if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+               perror("boot-image write");
+               exit(5);
+       }
+
+       while (nblks-- > 0) {
+               if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+                       perror("zImage read");
+                       exit(5);
+               }
+               cp = (uint *)tmpbuf;
+               for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+                       cksum += *cp++;
+               if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
+                       perror("boot-image write");
+                       exit(5);
+               }
+       }
+
+       /* rewrite the header with the computed checksum.
+       */
+       bt.bb_checksum = htonl(cksum);
+       if (lseek(out_fd, 0, SEEK_SET) < 0) {
+               perror("rewrite seek");
+               exit(1);
+       }
+       if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
+               perror("boot-image rewrite");
+               exit(1);
+       }
+
+       exit(0);
+}