]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
sky2: 88E8057 chip support
authorStephen Hemminger <shemminger@vyatta.com>
Tue, 17 Jun 2008 16:04:27 +0000 (09:04 -0700)
committerJeff Garzik <jgarzik@redhat.com>
Wed, 18 Jun 2008 03:59:39 +0000 (23:59 -0400)
Add support for Yukon 2 Ultra 2 chip set (88E8057) based on code in latest
version of vendor driver (sk98lin 10.60.2.3).  Untested on real hardware.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/net/sky2.c
drivers/net/sky2.h

index 3ebc1b43346477ef463680c3856d8224f8035823..c331c01943b7ab37e5faeb4201f882f43b7a26e6 100644 (file)
@@ -136,6 +136,7 @@ static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
+       { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
        { 0 }
 };
 
@@ -647,7 +648,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
                ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
        }
 
-       if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+       if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
                /* apply fixes in PHY AFE */
                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
 
@@ -655,9 +656,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
                gm_phy_write(hw, port, 0x18, 0xaa99);
                gm_phy_write(hw, port, 0x17, 0x2011);
 
-               /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
-               gm_phy_write(hw, port, 0x18, 0xa204);
-               gm_phy_write(hw, port, 0x17, 0x2002);
+               if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+                       /* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+                       gm_phy_write(hw, port, 0x18, 0xa204);
+                       gm_phy_write(hw, port, 0x17, 0x2002);
+               }
 
                /* set page register to 0 */
                gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
@@ -2807,6 +2810,7 @@ static u32 sky2_mhz(const struct sky2_hw *hw)
        case CHIP_ID_YUKON_EC_U:
        case CHIP_ID_YUKON_EX:
        case CHIP_ID_YUKON_SUPR:
+       case CHIP_ID_YUKON_UL_2:
                return 125;
 
        case CHIP_ID_YUKON_FE:
@@ -2899,6 +2903,11 @@ static int __devinit sky2_init(struct sky2_hw *hw)
                        | SKY2_HW_ADV_POWER_CTL;
                break;
 
+       case CHIP_ID_YUKON_UL_2:
+               hw->flags = SKY2_HW_GIGABIT
+                       | SKY2_HW_ADV_POWER_CTL;
+               break;
+
        default:
                dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
                        hw->chip_id);
@@ -4265,9 +4274,10 @@ static const char *sky2_name(u8 chipid, char *buf, int sz)
                "FE",           /* 0xb7 */
                "FE+",          /* 0xb8 */
                "Supreme",      /* 0xb9 */
+               "UL 2",         /* 0xba */
        };
 
-       if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_SUPR)
+       if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
                strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
        else
                snprintf(buf, sz, "(chip %#x)", chipid);
index 1fa82bf029d9a312c507c4dd0df1798cd4e718e6..4d9c4a19bb854398dd1b67c8c347e950cecf158a 100644 (file)
@@ -441,6 +441,7 @@ enum {
        CHIP_ID_YUKON_FE   = 0xb7, /* YUKON-2 FE */
        CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
        CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
+       CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
 };
 enum yukon_ec_rev {
        CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */