]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ASoC: Fix non-networked I2S mode for PXA SSP
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Fri, 13 Mar 2009 14:26:08 +0000 (14:26 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Sat, 14 Mar 2009 11:37:46 +0000 (11:37 +0000)
Two issues are fixed here:

 - I2S transmits the left frame with the clock low but I don't seem to
   get LRCLK out without SFRMDLY being set so invert SFRMP and set a
   delay.
 - I2S has a clock cycle prior to the first data byte in each channel
   so we need to delay the data by one cycle.

Tested-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
sound/soc/pxa/pxa-ssp.c

index 4dd0d7c57220326eaaae34c2319db5743e656733..b0bf40973d5bf7836e8e5cf092924a66b54d6b85 100644 (file)
@@ -1,4 +1,3 @@
-#define DEBUG
 /*
  * pxa-ssp.c  --  ALSA Soc Audio Layer
  *
@@ -561,14 +560,15 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
                sscr0 |= SSCR0_PSP;
                sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
 
+               /* See hw_params() */
                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
                case SND_SOC_DAIFMT_NB_NF:
+                       sspsp |= SSPSP_SFRMP;
                        break;
                case SND_SOC_DAIFMT_NB_IF:
-                       sspsp |= SSPSP_SFRMP;
                        break;
                case SND_SOC_DAIFMT_IB_IF:
-                       sspsp |= SSPSP_SFRMP | SSPSP_SCMODE(3);
+                       sspsp |= SSPSP_SCMODE(3);
                        break;
                default:
                        return -EINVAL;
@@ -691,8 +691,17 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
 #else
                        return -EINVAL;
 #endif
-               } else
-                       sspsp |= SSPSP_SFRMWDTH(width);
+               } else {
+                       /* The frame width is the width the LRCLK is
+                        * asserted for; the delay is expressed in
+                        * half cycle units.  We need the extra cycle
+                        * because the data starts clocking out one BCLK
+                        * after LRCLK changes polarity.
+                        */
+                       sspsp |= SSPSP_SFRMWDTH(width + 1);
+                       sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
+                       sspsp |= SSPSP_DMYSTRT(1);
+               }
 
                ssp_write_reg(ssp, SSPSP, sspsp);
                break;