--- /dev/null
+--- bluez-utils-2.21/tools/hciattach.c.orig 2005-07-03 17:19:51.000000000 -0400
++++ bluez-utils-2.21/tools/hciattach.c 2006-03-20 13:52:41.008742344 -0500
+@@ -62,6 +62,8 @@
+ #define HCI_UART_3WIRE 2
+ #define HCI_UART_H4DS 3
+
++#include "ti_bts.h"
++
+ struct uart_t {
+ char *type;
+ int m_id;
+@@ -71,6 +73,7 @@
+ int speed;
+ int flags;
+ int (*init) (int fd, struct uart_t *u, struct termios *ti);
++ char *bts; /* bluetooth script */
+ };
+
+ #define FLOW_CTL 0x0001
+@@ -246,6 +249,114 @@
+ return 0;
+ }
+
++static int brf6150(int fd, struct uart_t *u, struct termios *ti)
++{
++ bts_t *bfp;
++ int i;
++ unsigned long vers;
++ unsigned char actionbuf[256];
++ unsigned char resp[128]; /* Response */
++ unsigned long count;
++ unsigned short atype;
++
++ if (u->bts == NULL) /* no script, ignore */
++ return 0;
++
++ bfp = bts_load_script( u->bts, &vers );
++ if (bfp == NULL)
++ return -1;
++
++ fprintf( stderr, "Loading BTS script version %lu\n", vers );
++
++ while ((count = bts_next_action( bfp, actionbuf,
++ sizeof actionbuf - 1, &atype )) != 0) {
++ if (atype == ACTION_REMARKS) {
++ if (actionbuf[0] != 0)
++ fprintf( stderr, "%s\n", actionbuf );
++ }
++ else if (atype == ACTION_SEND_COMMAND) {
++#if 0
++ fprintf( stderr, "ACTION_SEND_COMMAND: ", (int)atype );
++ for (i=0; i<count; i++) {
++ fprintf( stderr, "0x%02x ", actionbuf[i] );
++ }
++ fprintf( stderr, "\n" );
++#endif
++ int n;
++ n = write(fd, actionbuf, count);
++ if (n < 0 || n < count) {
++ perror("Failed to write TI action command");
++ return -1;
++ }
++ }
++ else if (atype == ACTION_WAIT_EVENT) {
++ action_wait_t *wait = (action_wait_t *)actionbuf;
++#if 0
++ fprintf( stderr, "ACTION_WAIT_EVENT: %u msec, %u size, data = ", wait->msec, wait->size );
++ for (i=0; i<wait->size; i++) {
++ fprintf( stderr, "0x%02x ", wait->data[i] );
++ }
++ fprintf( stderr, "\n" );
++#endif
++ usleep(wait->msec); /* seems they give usec, not msec */
++ /* Read reply. */
++ if ((count = read_hci_event(fd, resp, sizeof resp)) < 0) {
++ perror("Failed to read TI command response");
++ return -1;
++ }
++ if (count < wait->size) {
++ fprintf( stderr, "TI command response is short.");
++ }
++ for (i=0; i<wait->size; i++) {
++ if (i == 3) continue; /* ignore */
++ if (resp[i] != wait->data[i]) {
++ fprintf( stderr, "TI command response does not match expected result.\n" );
++ }
++ }
++ }
++ else if (atype == ACTION_SERIAL_PORT_PARAMETERS) {
++ action_serial_t *sercmd = (action_serial_t *)actionbuf;
++
++ /* Set actual baudrate */
++ fprintf( stderr,
++ "BTS changing baud rate to %u, flow control to %u\n",
++ sercmd->baud, sercmd->flow_control );
++
++ tcflush(fd, TCIOFLUSH);
++
++ if (sercmd->flow_control)
++ ti->c_cflag |= CRTSCTS;
++ else
++ ti->c_cflag &= ~CRTSCTS;
++ if (tcsetattr(fd, TCSANOW, ti) < 0) {
++ perror("Can't set port settings");
++ return -1;
++ }
++
++ u->speed = sercmd->baud;
++
++ tcflush(fd, TCIOFLUSH);
++ if (set_speed(fd, ti, sercmd->baud) < 0) {
++ perror("Can't set baud rate");
++ return -1;
++ }
++ }
++ else if (atype == ACTION_DELAY) {
++ action_delay_t *delay = (action_delay_t *)actionbuf;
++ usleep(delay->msec); /* seems they give usec, not msec */
++ }
++ else {
++ fprintf( stderr, "BTS action type = %d: ", (int)atype );
++ for (i=0; i<count; i++) {
++ fprintf( stderr, "0x%02x ", actionbuf[i] );
++ }
++ fprintf( stderr, "\n" );
++ }
++ }
++ bts_unload_script( bfp );
++ return 0;
++}
++
+ static int texas(int fd, struct uart_t *u, struct termios *ti)
+ {
+ struct timespec tm = {0, 50000};
+@@ -286,14 +397,25 @@
+ } while (resp[4] != cmd[1] && resp[5] != cmd[2]);
+
+ /* Verify manufacturer */
+- if ((resp[11] & 0xFF) != 0x0d)
++ if (resp[11] != 0x0d)
+ fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
+
+ /* Print LMP version */
+- fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
++ fprintf(stderr, "TI module LMP version : 0x%02x\n", resp[10]);
+
+ /* Print LMP subversion */
+- fprintf(stderr, "Texas module LMP sub-version : 0x%02x%02x\n", resp[14] & 0xFF, resp[13] & 0xFF);
++ fprintf(stderr, "TI module LMP sub-version : 0x%02x%02x\n", resp[14], resp[13]);
++ if ((resp[14] >> 2) == 3) {
++ int err;
++ nanosleep(&tm, NULL);
++
++ /* BRF6150 */
++ if ((err=brf6150( fd, u, ti )) != 0) {
++ fprintf( stderr, "TI script failed (err=%d)\n",
++ err );
++ return -1;
++ }
++ }
+
+ nanosleep(&tm, NULL);
+ return 0;
+@@ -957,7 +1079,7 @@
+ {
+ printf("hciattach - HCI UART driver initialization utility\n");
+ printf("Usage:\n");
+- printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow]\n");
++ printf("\thciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] [-S bts-script] <tty> <type | id> [speed] [flow|noflow]\n");
+ printf("\thciattach -l\n");
+ }
+
+@@ -974,11 +1096,12 @@
+ pid_t pid;
+ struct sigaction sa;
+ char dev[20];
++ char *bts = NULL;
+
+ detach = 1;
+ printpid = 0;
+
+- while ((opt=getopt(argc, argv, "bnpt:s:l")) != EOF) {
++ while ((opt=getopt(argc, argv, "bnpt:s:S:l")) != EOF) {
+ switch(opt) {
+ case 'b':
+ send_break = 1;
+@@ -1000,6 +1123,10 @@
+ init_speed = atoi(optarg);
+ break;
+
++ case 'S':
++ bts = optarg;
++ break;
++
+ case 'l':
+ for (i = 0; uart[i].type; i++) {
+ printf("%-10s0x%04x,0x%04x\n", uart[i].type,
+@@ -1071,6 +1198,8 @@
+ if (init_speed)
+ u->init_speed = init_speed;
+
++ u->bts = bts;
++
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_flags = SA_NOCLDSTOP;
+ sa.sa_handler = sig_alarm;
+--- bluez-utils-2.24/tools/Makefile.am.orig 2005-12-03 07:22:16.000000000 +0100
++++ bluez-utils-2.24/tools/Makefile.am 2006-01-22 13:53:59.000000000 +0100
+@@ -37,6 +37,9 @@
+
+ noinst_PROGRAMS = hcisecfilter ppporc
+
++hciattach_SOURCES = hciattach.c ti_bts.h ti_bts.c
++hciattach_LDADD = @BLUEZ_LIBS@
++
+ hciconfig_SOURCES = hciconfig.c csr.h csr.c
+ hciconfig_LDADD = @BLUEZ_LIBS@ $(top_builddir)/common/libtextfile.a
+
+--- bluez-utils-2.24/tools/ti_bts.h.orig 2006-01-22 13:56:38.000000000 +0100
++++ bluez-utils-2.24/tools/ti_bts.h 2006-01-22 13:53:59.000000000 +0100
+@@ -0,0 +1,116 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ * Ported by SDG Systems, LLC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
++ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
++ * SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++#ifndef BT_SCRIPT_H
++#define BT_SCRIPT_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * Define the interface of Bluetooth Script
++ */
++
++typedef void bts_t;
++
++
++#define ACTION_SEND_COMMAND 1 /* Send out raw data (as is) */
++#define ACTION_WAIT_EVENT 2 /* Wait for data */
++#define ACTION_SERIAL_PORT_PARAMETERS 3
++#define ACTION_DELAY 4
++#define ACTION_RUN_SCRIPT 5
++#define ACTION_REMARKS 6
++
++/*
++ * Structure for ACTION_SEND_COMMAND
++ */
++typedef struct tagCActionCommand
++{
++ unsigned char data[1]; /* Data to send */
++} action_command_t;
++
++/*
++ * Structure for ACTION_WAIT_EVENT
++ */
++typedef struct tagCActionWaitEvent
++{
++ unsigned long msec; /* in milliseconds */
++ unsigned long size;
++ unsigned char data[1]; /* Data to wait for */
++} action_wait_t;
++
++
++/*
++ * Structure for ACTION_SERIAL_PORT_PARAMETERS
++ */
++typedef struct tagCActionSerialPortParameters
++{
++ unsigned long baud;
++ unsigned long flow_control;
++} action_serial_t;
++
++/* Flow Control Type */
++#define FCT_NONE 0
++#define FCT_HARDWARE 1
++
++#define DONT_CHANGE 0xFFFFFFFF /* For both baud rate and flow control */
++
++
++/*
++ * Structure for ACTION_DELAY
++ */
++typedef struct tagCActionDelay
++{
++ unsigned long msec; /* in milliseconds */
++} action_delay_t;
++
++/*
++ * Structure for ACTION_RUN_SCRIPT
++ */
++typedef struct tagCActionRunScript
++{
++ char filename[1];
++} action_run_t;
++
++/*
++ * Structure for ACTION_REMARKS
++ */
++typedef struct tagCActionRemarks
++{
++ char m_szRemarks[1];
++} action_remarks_t;
++
++
++const char *cis_create_filename(const unsigned char* cmdparms);
++bts_t * bts_load_script(const char* fname, unsigned long* version);
++unsigned long bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++ unsigned long nMaxSize, unsigned short* ptype);
++void bts_unload_script(bts_t* bts_fp);
++
++#ifdef __cplusplus
++};
++#endif
++
++#endif /* BT_SCRIPT_H */
++
+--- bluez-utils-2.24/tools/ti_bts.c.orig 2006-01-22 13:56:36.000000000 +0100
++++ bluez-utils-2.24/tools/ti_bts.c 2006-01-22 13:56:31.000000000 +0100
+@@ -0,0 +1,149 @@
++/*
++ * Copyright (c) 2005 Texas Instruments, Inc.
++ * Ported by SDG Systems, LLC
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation;
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
++ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
++ * IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
++ * CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ *
++ * ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
++ * COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
++ * SOFTWARE IS DISCLAIMED.
++ *
++ */
++
++
++#include <stdio.h>
++#include <stdlib.h>
++#include "ti_bts.h"
++
++#ifndef MAKEWORD
++#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) | ((unsigned short)((unsigned char)(b))) << 8))
++#endif
++
++#define TI_MANUFACTURER_ID 13
++
++/*
++ * Common Init Script specific
++ */
++const char *
++cis_create_filename(const unsigned char* cmdparms)
++{
++ static char bts_file[50];
++
++ /* Check for TI's id */
++ unsigned short manfid = MAKEWORD(cmdparms[8], cmdparms[9]);
++
++ if (TI_MANUFACTURER_ID == manfid) {
++ unsigned short version = MAKEWORD(cmdparms[10], cmdparms[11]);
++
++ unsigned short chip = (version & 0x7C00) >> 10;
++ unsigned short min_ver = (version & 0x007F);
++ unsigned short maj_ver = (version & 0x0380) >> 7;
++
++ if (0 != (version & 0x8000)) {
++ maj_ver |= 0x0008;
++ }
++
++ sprintf( bts_file, "TIInit_%d.%d.%d.bts",
++ (int)chip, (int)maj_ver, (int)min_ver);
++
++ return &bts_file[0];
++ }
++ return NULL;
++}
++
++typedef struct tagCHeader
++{
++ unsigned long magic;
++ unsigned long version;
++ unsigned char future[24];
++} cheader_t;
++
++
++/* The value 0x42535442 stands for (in ASCII) BTSB */
++/* which is Bluetooth Script Binary */
++#define FILE_HEADER_MAGIC 0x42535442
++
++
++bts_t *
++bts_load_script(const char* fname, unsigned long* version)
++{
++ bts_t* bts = NULL;
++ FILE* fp = fopen(fname, "rb");
++
++ if (NULL != fp) {
++ /* Read header */
++ cheader_t header;
++
++ /* Read header */
++ if (1 == fread(&header, sizeof(header), 1, fp)) {
++ /* Check magic number for correctness */
++ if (header.magic == FILE_HEADER_MAGIC) {
++ /* If user wants the version number */
++ if (NULL != version) {
++ *version = header.version;
++ }
++ bts = (bts_t*)fp;
++ }
++ }
++ /* If failed reading the file, close it */
++ if (NULL == bts) {
++ fclose(fp);
++ }
++ }
++ return bts;
++}
++
++unsigned long
++bts_next_action(const bts_t* bts_fp, unsigned char* action_buf,
++ unsigned long nMaxSize, unsigned short* ptype)
++{
++ unsigned long bytes = 0;
++ FILE* fp = (FILE*)bts_fp;
++ unsigned char action_hdr[4];
++
++ if (bts_fp == NULL)
++ return 0;
++
++ /* Each Action has the following: */
++ /* UINT16 type of this action */
++ /* UINT16 size of rest */
++ /* BYTE[] action buffer (for HCI, includes the type byte e.g. 1 for hci command) */
++
++ if (1 == fread(&action_hdr[0], sizeof(action_hdr), 1, fp)) {
++ unsigned short type = *(unsigned short*)&action_hdr[0];
++ unsigned short size = *(unsigned short*)&action_hdr[2];
++
++ if (size <= nMaxSize) {
++ int nread = fread(action_buf, sizeof(action_buf[0]), size, fp);
++
++ if (nread == size) {
++ *ptype = type;
++ bytes = (unsigned long)size;
++ }
++ }
++ }
++
++ return bytes;
++}
++
++void
++bts_unload_script(bts_t* bts_fp)
++{
++ FILE* fp = (FILE*)bts_fp;
++
++ if (NULL != fp) {
++ fclose(fp);
++ }
++}
++
projects / familiar-h63xx-build.git / commitdiff