* Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
* information that was not already available.
*
- * It seems that KLSI bought some silicon-design information from ScanLogic,
+ * It seems that KLSI bought some silicon-design information from ScanLogic,
* whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
* KLSI has firmware available for their devices; it is probable that the
* firmware differs from that used by KLSI in their products. If you have an
- * original KLSI device and can provide some information on it, I would be
- * most interested in adding support for it here. If you have any information
+ * original KLSI device and can provide some information on it, I would be
+ * most interested in adding support for it here. If you have any information
* on the protocol used (or find errors in my reverse-engineered stuff), please
* let me know.
*
* 0.2 - TIOCMGET works, so autopilot(1) can be used!
* 0.1 - can be used to to pilot-xfer -p /dev/ttyUSB0 -l
*
- * The driver skeleton is mainly based on mct_u232.c and various other
+ * The driver skeleton is mainly based on mct_u232.c and various other
* pieces of code shamelessly copied from the drivers/usb/serial/ directory.
*/
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
/*
* Function prototypes
*/
-static int klsi_105_startup (struct usb_serial *serial);
-static void klsi_105_shutdown (struct usb_serial *serial);
-static int klsi_105_open (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct file *filp);
-static void klsi_105_close (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct file *filp);
-static int klsi_105_write (struct tty_struct *tty,
- struct usb_serial_port *port,
- const unsigned char *buf,
- int count);
-static void klsi_105_write_bulk_callback (struct urb *urb);
-static int klsi_105_chars_in_buffer (struct tty_struct *tty);
-static int klsi_105_write_room (struct tty_struct *tty);
-
-static void klsi_105_read_bulk_callback (struct urb *urb);
-static void klsi_105_set_termios (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old);
-static void klsi_105_throttle (struct tty_struct *tty);
-static void klsi_105_unthrottle (struct tty_struct *tty);
-/*
-static void klsi_105_break_ctl (struct tty_struct *tty,
- int break_state );
- */
-static int klsi_105_tiocmget (struct tty_struct *tty,
- struct file *file);
-static int klsi_105_tiocmset (struct tty_struct *tty,
- struct file *file, unsigned int set,
- unsigned int clear);
+static int klsi_105_startup(struct usb_serial *serial);
+static void klsi_105_shutdown(struct usb_serial *serial);
+static int klsi_105_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static void klsi_105_close(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *filp);
+static int klsi_105_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count);
+static void klsi_105_write_bulk_callback(struct urb *urb);
+static int klsi_105_chars_in_buffer(struct tty_struct *tty);
+static int klsi_105_write_room(struct tty_struct *tty);
+static void klsi_105_read_bulk_callback(struct urb *urb);
+static void klsi_105_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+static void klsi_105_throttle(struct tty_struct *tty);
+static void klsi_105_unthrottle(struct tty_struct *tty);
+static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file);
+static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
/*
* All of the device info needed for the KLSI converters.
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver kl5kusb105d_driver = {
.name = "kl5kusb105d",
.write_bulk_callback = klsi_105_write_bulk_callback,
.chars_in_buffer = klsi_105_chars_in_buffer,
.write_room = klsi_105_write_room,
- .read_bulk_callback =klsi_105_read_bulk_callback,
+ .read_bulk_callback = klsi_105_read_bulk_callback,
.set_termios = klsi_105_set_termios,
/*.break_ctl = klsi_105_break_ctl,*/
.tiocmget = klsi_105_tiocmget,
struct ktermios termios;
unsigned long line_state; /* modem line settings */
/* write pool */
- struct urb * write_urb_pool[NUM_URBS];
+ struct urb *write_urb_pool[NUM_URBS];
spinlock_t lock;
unsigned long bytes_in;
unsigned long bytes_out;
{
int rc;
- rc = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- KL5KUSB105A_SIO_SET_DATA,
- USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
- 0, /* value */
- 0, /* index */
- settings,
- sizeof(struct klsi_105_port_settings),
- KLSI_TIMEOUT);
+ rc = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_SET_DATA,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE,
+ 0, /* value */
+ 0, /* index */
+ settings,
+ sizeof(struct klsi_105_port_settings),
+ KLSI_TIMEOUT);
if (rc < 0)
err("Change port settings failed (error = %d)", rc);
info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
settings->pktlen,
settings->baudrate, settings->databits,
settings->unknown1, settings->unknown2);
- return rc;
+ return rc;
} /* klsi_105_chg_port_settings */
/* translate a 16-bit status value from the device to linux's TIO bits */
return res;
}
-/*
+/*
* Read line control via vendor command and return result through
- * *line_state_p
+ * *line_state_p
*/
/* It seems that the status buffer has always only 2 bytes length */
#define KLSI_STATUSBUF_LEN 2
unsigned long *line_state_p)
{
int rc;
- __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
+ __u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
__u16 status;
info("%s - sending SIO Poll request", __func__);
- rc = usb_control_msg(port->serial->dev,
+ rc = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_POLL,
- USB_TYPE_VENDOR | USB_DIR_IN,
+ USB_TYPE_VENDOR | USB_DIR_IN,
0, /* value */
0, /* index */
status_buf, KLSI_STATUSBUF_LEN,
*line_state_p = klsi_105_status2linestate(status);
}
-
- return rc;
+ return rc;
}
* Driver's tty interface functions
*/
-static int klsi_105_startup (struct usb_serial *serial)
+static int klsi_105_startup(struct usb_serial *serial)
{
struct klsi_105_private *priv;
int i, j;
*/
/* allocate the private data structure */
- for (i=0; i<serial->num_ports; i++) {
+ for (i = 0; i < serial->num_ports; i++) {
priv = kmalloc(sizeof(struct klsi_105_private),
GFP_KERNEL);
if (!priv) {
priv->bytes_out = 0;
usb_set_serial_port_data(serial->port[i], priv);
- spin_lock_init (&priv->lock);
- for (j=0; j<NUM_URBS; j++) {
- struct urb* urb = usb_alloc_urb(0, GFP_KERNEL);
+ spin_lock_init(&priv->lock);
+ for (j = 0; j < NUM_URBS; j++) {
+ struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
priv->write_urb_pool[j] = urb;
if (urb == NULL) {
goto err_cleanup;
}
- urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
- GFP_KERNEL);
+ urb->transfer_buffer =
+ kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.", __func__);
+ err("%s - out of memory for urb buffers.",
+ __func__);
goto err_cleanup;
}
}
/* priv->termios is left uninitalized until port opening */
init_waitqueue_head(&serial->port[i]->write_wait);
}
-
+
return 0;
err_cleanup:
for (; i >= 0; i--) {
priv = usb_get_serial_port_data(serial->port[i]);
- for (j=0; j < NUM_URBS; j++) {
+ for (j = 0; j < NUM_URBS; j++) {
if (priv->write_urb_pool[j]) {
kfree(priv->write_urb_pool[j]->transfer_buffer);
usb_free_urb(priv->write_urb_pool[j]);
} /* klsi_105_startup */
-static void klsi_105_shutdown (struct usb_serial *serial)
+static void klsi_105_shutdown(struct usb_serial *serial)
{
int i;
-
+
dbg("%s", __func__);
/* stop reads and writes on all ports */
- for (i=0; i < serial->num_ports; ++i) {
- struct klsi_105_private *priv = usb_get_serial_port_data(serial->port[i]);
+ for (i = 0; i < serial->num_ports; ++i) {
+ struct klsi_105_private *priv =
+ usb_get_serial_port_data(serial->port[i]);
unsigned long flags;
if (priv) {
/* kill our write urb pool */
int j;
struct urb **write_urbs = priv->write_urb_pool;
- spin_lock_irqsave(&priv->lock,flags);
+ spin_lock_irqsave(&priv->lock, flags);
for (j = 0; j < NUM_URBS; j++) {
if (write_urbs[j]) {
* oopses. */
/* usb_kill_urb(write_urbs[j]); */
kfree(write_urbs[j]->transfer_buffer);
- usb_free_urb (write_urbs[j]);
+ usb_free_urb(write_urbs[j]);
}
}
-
- spin_unlock_irqrestore (&priv->lock, flags);
-
+ spin_unlock_irqrestore(&priv->lock, flags);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
/* Do a defined restart:
* Set up sane default baud rate and send the 'READ_ON'
- * vendor command.
+ * vendor command.
* FIXME: set modem line control (how?)
* Then read the modem line control and store values in
* priv->line_state.
cfg.unknown1 = 0;
cfg.unknown2 = 1;
klsi_105_chg_port_settings(port, &cfg);
-
+
/* set up termios structure */
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
priv->termios.c_iflag = tty->termios->c_iflag;
priv->termios.c_oflag = tty->termios->c_oflag;
priv->termios.c_cflag = tty->termios->c_cflag;
priv->termios.c_lflag = tty->termios->c_lflag;
- for (i=0; i<NCCS; i++)
+ for (i = 0; i < NCCS; i++)
priv->termios.c_cc[i] = tty->termios->c_cc[i];
priv->cfg.pktlen = cfg.pktlen;
priv->cfg.baudrate = cfg.baudrate;
priv->cfg.databits = cfg.databits;
priv->cfg.unknown1 = cfg.unknown1;
priv->cfg.unknown2 = cfg.unknown2;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
/* READ_ON and urb submission */
- usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
}
rc = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev,0),
+ usb_sndctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_CONFIGURE,
USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
KL5KUSB105A_SIO_CONFIGURE_READ_ON,
if (rc < 0) {
err("Enabling read failed (error = %d)", rc);
retval = rc;
- } else
+ } else
dbg("%s - enabled reading", __func__);
rc = klsi_105_get_line_state(port, &line_state);
if (rc >= 0) {
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
priv->line_state = line_state;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - read line state 0x%lx", __func__, line_state);
retval = 0;
} else
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
/* send READ_OFF */
- rc = usb_control_msg (port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- KL5KUSB105A_SIO_CONFIGURE,
- USB_TYPE_VENDOR | USB_DIR_OUT,
- KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
- 0, /* index */
- NULL, 0,
- KLSI_TIMEOUT);
+ rc = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_CONFIGURE,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+ 0, /* index */
+ NULL, 0,
+ KLSI_TIMEOUT);
if (rc < 0)
err("Disabling read failed (error = %d)", rc);
}
/* FIXME */
/* wgg - do I need this? I think so. */
usb_kill_urb(port->interrupt_in_urb);
- info("kl5kusb105 port stats: %ld bytes in, %ld bytes out", priv->bytes_in, priv->bytes_out);
+ info("kl5kusb105 port stats: %ld bytes in, %ld bytes out",
+ priv->bytes_in, priv->bytes_out);
} /* klsi_105_close */
/* We need to write a complete 64-byte data block and encode the
- * number actually sent in the first double-byte, LSB-order. That
+ * number actually sent in the first double-byte, LSB-order. That
* leaves at most 62 bytes of payload.
*/
#define KLSI_105_DATA_OFFSET 2 /* in the bulk urb data block */
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int result, size;
- int bytes_sent=0;
+ int bytes_sent = 0;
dbg("%s - port %d", __func__, port->number);
struct urb *urb = NULL;
unsigned long flags;
int i;
- /* since the pool is per-port we might not need the spin lock !? */
- spin_lock_irqsave (&priv->lock, flags);
- for (i=0; i<NUM_URBS; i++) {
+ /* since the pool is per-port we might not need
+ the spin lock !? */
+ spin_lock_irqsave(&priv->lock, flags);
+ for (i = 0; i < NUM_URBS; i++) {
if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
urb = priv->write_urb_pool[i];
dbg("%s - using pool URB %d", __func__, i);
break;
}
}
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- if (urb==NULL) {
+ if (urb == NULL) {
dbg("%s - no more free urbs", __func__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
+ urb->transfer_buffer =
+ kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
err("%s - no more kernel memory...", __func__);
goto exit;
}
}
- size = min (count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
- size = min (size, URB_TRANSFER_BUFFER_SIZE - KLSI_105_DATA_OFFSET);
+ size = min(count, port->bulk_out_size - KLSI_105_DATA_OFFSET);
+ size = min(size, URB_TRANSFER_BUFFER_SIZE -
+ KLSI_105_DATA_OFFSET);
- memcpy (urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
+ memcpy(urb->transfer_buffer + KLSI_105_DATA_OFFSET, buf, size);
/* write payload size into transfer buffer */
((__u8 *)urb->transfer_buffer)[0] = (__u8) (size & 0xFF);
/* send the data out the bulk port */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __func__, result);
+ err("%s - failed submitting write urb, error %d",
+ __func__, result);
goto exit;
}
buf += size;
}
exit:
/* lockless, but it's for debug info only... */
- priv->bytes_out+=bytes_sent;
+ priv->bytes_out += bytes_sent;
return bytes_sent; /* that's how much we wrote */
} /* klsi_105_write */
-static void klsi_105_write_bulk_callback ( struct urb *urb)
+static void klsi_105_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int status = urb->status;
/* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer (struct tty_struct *tty)
+static int klsi_105_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
int chars = 0;
unsigned long flags;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
- if (priv->write_urb_pool[i]->status == -EINPROGRESS) {
+ if (priv->write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
- }
}
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - returns %d", __func__, chars);
- return (chars);
+ return chars;
}
-static int klsi_105_write_room (struct tty_struct *tty)
+static int klsi_105_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
unsigned long flags;
int room = 0;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
- if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
+ if (priv->write_urb_pool[i]->status != -EINPROGRESS)
room += URB_TRANSFER_BUFFER_SIZE;
- }
}
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - returns %d", __func__, room);
- return (room);
+ return room;
}
-static void klsi_105_read_bulk_callback (struct urb *urb)
+static void klsi_105_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
* against re-entry an then mixed-up data because of
* intermixed tty_flip_buffer_push()s
* FIXME
- */
+ */
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
priv->bytes_in += bytes_sent;
}
/* Continue trying to always read */
- usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+ usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
port);
rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (rc)
- err("%s - failed resubmitting read urb, error %d", __func__, rc);
+ err("%s - failed resubmitting read urb, error %d",
+ __func__, rc);
} /* klsi_105_read_bulk_callback */
-static void klsi_105_set_termios (struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void klsi_105_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
{
struct klsi_105_private *priv = usb_get_serial_port_data(port);
unsigned int iflag = tty->termios->c_iflag;
struct klsi_105_port_settings cfg;
unsigned long flags;
speed_t baud;
-
+
/* lock while we are modifying the settings */
- spin_lock_irqsave (&priv->lock, flags);
-
+ spin_lock_irqsave(&priv->lock, flags);
+
/*
* Update baud rate
*/
baud = tty_get_baud_rate(tty);
- if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
- /* reassert DTR and (maybe) RTS on transition from B0 */
- if( (old_cflag & CBAUD) == B0 ) {
+ if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
+ /* reassert DTR and (maybe) RTS on transition from B0 */
+ if ((old_cflag & CBAUD) == B0) {
dbg("%s: baud was B0", __func__);
#if 0
priv->control_state |= TIOCM_DTR;
/* don't set RTS if using hardware flow control */
- if (!(old_cflag & CRTSCTS)) {
+ if (!(old_cflag & CRTSCTS))
priv->control_state |= TIOCM_RTS;
- }
mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
}
}
- switch(baud) {
- case 0: /* handled below */
- break;
- case 1200:
- priv->cfg.baudrate = kl5kusb105a_sio_b1200;
- break;
- case 2400:
- priv->cfg.baudrate = kl5kusb105a_sio_b2400;
- break;
- case 4800:
- priv->cfg.baudrate = kl5kusb105a_sio_b4800;
- break;
- case 9600:
+ switch (baud) {
+ case 0: /* handled below */
+ break;
+ case 1200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+ break;
+ case 2400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+ break;
+ case 4800:
+ priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+ break;
+ case 9600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ break;
+ case 19200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+ break;
+ case 38400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+ break;
+ case 57600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+ break;
+ case 115200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+ break;
+ default:
+ dbg("KLSI USB->Serial converter:"
+ " unsupported baudrate request, using default of 9600");
priv->cfg.baudrate = kl5kusb105a_sio_b9600;
- break;
- case 19200:
- priv->cfg.baudrate = kl5kusb105a_sio_b19200;
- break;
- case 38400:
- priv->cfg.baudrate = kl5kusb105a_sio_b38400;
- break;
- case 57600:
- priv->cfg.baudrate = kl5kusb105a_sio_b57600;
- break;
- case 115200:
- priv->cfg.baudrate = kl5kusb105a_sio_b115200;
- break;
- default:
- dbg("KLSI USB->Serial converter:"
- " unsupported baudrate request, using default"
- " of 9600");
- priv->cfg.baudrate = kl5kusb105a_sio_b9600;
- baud = 9600;
- break;
+ baud = 9600;
+ break;
}
- if ((cflag & CBAUD) == B0 ) {
+ if ((cflag & CBAUD) == B0) {
dbg("%s: baud is B0", __func__);
/* Drop RTS and DTR */
/* maybe this should be simulated by sending read
;
#if 0
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- mct_u232_set_modem_ctrl(serial, priv->control_state);
+ mct_u232_set_modem_ctrl(serial, priv->control_state);
#endif
}
tty_encode_baud_rate(tty, baud, baud);
switch (cflag & CSIZE) {
case CS5:
dbg("%s - 5 bits/byte not supported", __func__);
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return ;
case CS6:
dbg("%s - 6 bits/byte not supported", __func__);
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return ;
case CS7:
priv->cfg.databits = kl5kusb105a_dtb_7;
* Update line control register (LCR)
*/
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
- || (cflag & CSTOPB) != (old_cflag & CSTOPB) ) {
-
+ || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
/* Not currently supported */
tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
#if 0
#endif
;
}
-
/*
* Set flow control: well, I do not really now how to handle DTR/RTS.
* Just do what we have seen with SniffUSB on Win98.
*/
- if( (iflag & IXOFF) != (old_iflag & IXOFF)
+ if ((iflag & IXOFF) != (old_iflag & IXOFF)
|| (iflag & IXON) != (old_iflag & IXON)
- || (cflag & CRTSCTS) != (old_cflag & CRTSCTS) ) {
-
+ || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
/* Not currently supported */
tty->termios->c_cflag &= ~CRTSCTS;
/* Drop DTR/RTS if no flow control otherwise assert */
#if 0
- if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS) )
+ if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
priv->control_state |= TIOCM_DTR | TIOCM_RTS;
else
priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
#endif
;
}
- memcpy (&cfg, &priv->cfg, sizeof(cfg));
- spin_unlock_irqrestore (&priv->lock, flags);
-
+ memcpy(&cfg, &priv->cfg, sizeof(cfg));
+ spin_unlock_irqrestore(&priv->lock, flags);
+
/* now commit changes to device */
klsi_105_chg_port_settings(port, &cfg);
} /* klsi_105_set_termios */
#if 0
-static void mct_u232_break_ctl( struct tty_struct *tty, int break_state )
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
- struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
+ struct mct_u232_private *priv =
+ (struct mct_u232_private *)port->private;
unsigned char lcr = priv->last_lcr;
dbg("%sstate=%d", __func__, break_state);
} /* mct_u232_break_ctl */
#endif
-static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file)
+static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
return rc;
}
- spin_lock_irqsave (&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
priv->line_state = line_state;
- spin_unlock_irqrestore (&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - read line state 0x%lx", __func__, line_state);
return (int)line_state;
}
-static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
{
int retval = -EINVAL;
-
+
dbg("%s", __func__);
/* if this ever gets implemented, it should be done something like this:
return retval;
}
-static void klsi_105_throttle (struct tty_struct *tty)
+static void klsi_105_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
-static void klsi_105_unthrottle (struct tty_struct *tty)
+static void klsi_105_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
int result;
-static int __init klsi_105_init (void)
+static int __init klsi_105_init(void)
{
int retval;
retval = usb_serial_register(&kl5kusb105d_device);
}
-static void __exit klsi_105_exit (void)
+static void __exit klsi_105_exit(void)
{
- usb_deregister (&kl5kusb105d_driver);
- usb_serial_deregister (&kl5kusb105d_device);
+ usb_deregister(&kl5kusb105d_driver);
+ usb_serial_deregister(&kl5kusb105d_device);
}
-module_init (klsi_105_init);
-module_exit (klsi_105_exit);
+module_init(klsi_105_init);
+module_exit(klsi_105_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
projects / linux-2.6-omap-h63xx.git / commitdiff