int i;
int ret;
- /* IEEE 1212 says that the entire bus info block should be readable in
- * a single transaction regardless of the max_rom value.
- * Unfortunately, many IEEE 1394 devices do not abide by that, so the
- * bus info block will be read 1 quadlet at a time. The rest of the
- * ConfigROM will be read according to the max_rom field. */
for (i = 0; i < csr->bus_info_len; i += sizeof(u32)) {
ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i,
- sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)],
- csr->private);
+ &csr->cache_head->data[bytes_to_quads(i)],
+ csr->private);
if (ret != CSR1212_SUCCESS)
return ret;
* a time. */
for (i = csr->bus_info_len; i <= csr->crc_len; i += sizeof(u32)) {
ret = csr->ops->bus_read(csr, CSR1212_CONFIG_ROM_SPACE_BASE + i,
- sizeof(u32), &csr->cache_head->data[bytes_to_quads(i)],
- csr->private);
+ &csr->cache_head->data[bytes_to_quads(i)],
+ csr->private);
if (ret != CSR1212_SUCCESS)
return ret;
}
if (csr->ops->bus_read(csr,
CSR1212_REGISTER_SPACE_BASE + kv->offset,
- sizeof(u32), &q, csr->private))
+ &q, csr->private))
return -EIO;
kv->value.leaf.len = be32_to_cpu(q) >> 16;
addr = (CSR1212_CSR_ARCH_REG_SPACE_BASE + cache->offset +
cr->offset_end) & ~(csr->max_rom - 1);
- if (csr->ops->bus_read(csr, addr, csr->max_rom, cache_ptr,
- csr->private)) {
- if (csr->max_rom == 4)
- /* We've got problems! */
- return -EIO;
-
- /* Apperently the max_rom value was a lie, set it to
- * do quadlet reads and try again. */
- csr->max_rom = 4;
- continue;
- }
+ if (csr->ops->bus_read(csr, addr, cache_ptr, csr->private))
+ return -EIO;
cr->offset_end += csr->max_rom - (cr->offset_end &
(csr->max_rom - 1));
int csr1212_parse_csr(struct csr1212_csr *csr)
{
- static const int mr_map[] = { 4, 64, 1024, 0 };
struct csr1212_dentry *dentry;
int ret;
if (ret != CSR1212_SUCCESS)
return ret;
- if (!csr->ops->get_max_rom) {
- csr->max_rom = mr_map[0]; /* default value */
- } else {
- int i = csr->ops->get_max_rom(csr->bus_info_data,
- csr->private);
- if (i & ~0x3)
- return -EINVAL;
- csr->max_rom = mr_map[i];
- }
+ /*
+ * There has been a buggy firmware with bus_info_block.max_rom > 0
+ * spotted which actually only supported quadlet read requests to the
+ * config ROM. Therefore read everything quadlet by quadlet regardless
+ * of what the bus info block says.
+ */
+ csr->max_rom = 4;
csr->cache_head->layout_head = csr->root_kv;
csr->cache_head->layout_tail = csr->root_kv;
* entries located in the Units Space. Must return 0 on success
* anything else indicates an error. */
int (*bus_read) (struct csr1212_csr *csr, u64 addr,
- u16 length, void *buffer, void *private);
+ void *buffer, void *private);
/* This function is used by csr1212 to allocate a region in units space
* in the event that Config ROM entries don't all fit in the predefined
/* This function is used by csr1212 to release a region in units space
* that is no longer needed. */
void (*release_addr) (u64 addr, void *private);
-
- /* This function is used by csr1212 to determine the max read request
- * supported by a remote node when reading the ConfigROM space. Must
- * return 0, 1, or 2 per IEEE 1212. */
- int (*get_max_rom) (u32 *bus_info, void *private);
};
for (i = IEEE1394_SPEED_100; i <= old_speed; i++) {
*speed = i;
error = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
- &q, sizeof(quadlet_t));
+ &q, 4);
if (error)
break;
*buffer = q;
return error;
}
-static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
+static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr,
void *buffer, void *__ci)
{
struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci;
for (i = 1; ; i++) {
error = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
- buffer, length);
+ buffer, 4);
if (!error) {
ci->speed_unverified = 0;
break;
/* The ieee1394_core guessed the node's speed capability from
* the self ID. Check whether a lower speed works. */
- if (ci->speed_unverified && length == sizeof(quadlet_t)) {
+ if (ci->speed_unverified) {
error = nodemgr_check_speed(ci, addr, buffer);
if (!error)
break;
return error;
}
-#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
-
-static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
-{
- /* Freecom FireWire Hard Drive firmware bug */
- if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
- return 0;
-
- return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
-}
-
static struct csr1212_bus_ops nodemgr_csr_ops = {
.bus_read = nodemgr_bus_read,
- .get_max_rom = nodemgr_get_max_rom
};