* when the cover switch is open */
#define OMAP_MMC_SWITCH_POLL_DELAY 500
-static int mmc_omap_enable_poll = 1;
+static int mmc_omap_enable_poll = 0;
struct mmc_omap_host {
int initialized;
u16 * buffer;
u32 buffer_bytes_left;
u32 total_bytes_left;
+ struct timer_list xfer_timer;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
static void
mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
{
+ del_timer_sync(&host->xfer_timer);
+
if (host->dma_in_use) {
enum dma_data_direction dma_data_dir;
if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
DBG("MMC%d: End request, err %x\n", host->id, cmd->error);
+ if (host->data != NULL)
+ del_timer_sync(&host->xfer_timer);
host->mrq = NULL;
clk_unuse(host->clk);
mmc_request_done(host->mmc, cmd->mrq);
}
}
+static void
+mmc_omap_xfer_timeout(unsigned long data)
+{
+ struct mmc_omap_host *host = (struct mmc_omap_host *) data;
+
+ printk(KERN_ERR "MMC%d: Data xfer timeout\n", host->id);
+ if (host->data != NULL) {
+ host->data->error |= MMC_ERR_TIMEOUT;
+ /* Perform a pseudo-reset of the MMC core logic, since
+ * the controller seems to get really stuck */
+ OMAP_MMC_WRITE(host->base, CON, OMAP_MMC_READ(host->base, CON) & ~(1 << 11));
+ OMAP_MMC_WRITE(host->base, CON, OMAP_MMC_READ(host->base, CON) | (1 << 11));
+ mmc_omap_xfer_done(host, host->data);
+ }
+}
+
/* PIO only */
static void
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) {
OMAP_MMC_WRITE(host->base, STAT, status); // Reset status bits
#ifdef CONFIG_MMC_DEBUG
- printk(KERN_DEBUG "\tMMC IRQ %04x (CMD %d): ", status,
+ pr_debug("\tMMC IRQ %04x (CMD %d): ", status,
host->cmd != NULL ? host->cmd->opcode : -1);
mmc_omap_report_irq(status);
printk("\n");
static irqreturn_t mmc_omap_switch_irq(int irq, void *dev_id, struct pt_regs *regs)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) dev_id;
+ int cover_open, detect_now;
+ cover_open = mmc_omap_cover_is_open(host);
DBG("MMC%d cover is now %s\n", host->id,
- omap_get_gpio_datain(host->switch_pin) ? "open" : "closed");
- schedule_work(&host->switch_work);
-
+ cover_open ? "open" : "closed");
+ detect_now = 0;
+ if (host->switch_last_state != cover_open) {
+ /* If the cover was just opened, we want to inform user-space
+ * about it as soon as possible */
+ if (cover_open)
+ detect_now = 1;
+ }
+ if (detect_now)
+ schedule_work(&host->switch_work);
+ else {
+ /* Delay the switch work a little bit to get rid of the GPIO
+ * line bounces */
+ mod_timer(&host->switch_timer,
+ jiffies + msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
+ }
return IRQ_HANDLED;
}
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
struct mmc_card *card;
static int complained = 0;
- int cards = 0, cover_open;
+ int card_count = 0, cover_open;
if (host->switch_pin == -1)
return;
mmc_detect_change(host->mmc);
list_for_each_entry(card, &host->mmc->cards, node) {
if (mmc_card_present(card))
- cards++;
+ card_count++;
}
- DBG("MMC%d: %d card(s) present\n", host->id, cards);
- if (mmc_omap_cover_is_open(host)) {
+ DBG("MMC%d: %d card(s) present\n", host->id, card_count);
+ if (cover_open) {
if (!complained) {
printk(KERN_INFO "MMC%d: cover is open\n", host->id);
complained = 1;
}
- if (mmc_omap_enable_poll)
+ /* If the cover is open and a card is present (or the
+ * poll has been forced on manually), we continue
+ * polling */
+ if (cover_open && (card_count || mmc_omap_enable_poll))
mod_timer(&host->switch_timer, jiffies +
msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
} else {
mmc_omap_sg_to_buf(host);
host->dma_in_use = 0;
}
+ mod_timer(&host->xfer_timer, jiffies + msecs_to_jiffies(500));
pr_debug("MMC%d: %s %s %s, DTO %d cycles + %d ns, "
"%d blocks of %d bytes, %d segments\n",
host->dma_timer.function = mmc_omap_dma_timer;
host->dma_timer.data = (unsigned long) host;
+ init_timer(&host->xfer_timer);
+ host->xfer_timer.function = mmc_omap_xfer_timeout;
+ host->xfer_timer.data = (unsigned long) host;
+
host->id = pdev->id;
host->clk = clk_get(dev, (host->id == 1) ? "mmc1_ck" : "mmc2_ck");
if (IS_ERR(host->clk)) {