skge: genesis phy initialzation

The SysKonnect Genesis based board would fail on initialization
with phy_read errors caused by not waiting for last phy write.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 869c7cfb99a4e5b3f7eb53a7f35fbbd0cddf0775..af2e6782031b540bfd3b24998bc9db15a40dbdc2 100644 (file)
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
        int i;
 
        xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
-       xm_read16(hw, port, XM_PHY_DATA);
+       *val = xm_read16(hw, port, XM_PHY_DATA);
 
-       /* Need to wait for external PHY */
        for (i = 0; i < PHY_RETRIES; i++) {
-               udelay(1);
                if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
                        goto ready;
+               udelay(1);
        }
 
        return -ETIMEDOUT;
@@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
 
  ready:
        xm_write16(hw, port, XM_PHY_DATA, val);
-       return 0;
+       for (i = 0; i < PHY_RETRIES; i++) {
+               if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+                       return 0;
+               udelay(1);
+       }
+       return -ETIMEDOUT;
 }
 
 static void genesis_init(struct skge_hw *hw)
@@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
        u32 r;
        const u8 zero[6]  = { 0 };
 
-       /* Clear MIB counters */
-       xm_write16(hw, port, XM_STAT_CMD,
-                       XM_SC_CLR_RXC | XM_SC_CLR_TXC);
-       /* Clear two times according to Errata #3 */
-       xm_write16(hw, port, XM_STAT_CMD,
-                       XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+       for (i = 0; i < 10; i++) {
+               skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
+                            MFF_SET_MAC_RST);
+               if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
+                       goto reset_ok;
+               udelay(1);
+       }
 
+       printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+
+ reset_ok:
        /* Unreset the XMAC. */
        skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
                r |= GP_DIR_2|GP_IO_2;
 
        skge_write32(hw, B2_GP_IO, r);
-       skge_read32(hw, B2_GP_IO);
+
 
        /* Enable GMII interface */
        xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
        for (i = 1; i < 16; i++)
                xm_outaddr(hw, port, XM_EXM(i), zero);
 
+       /* Clear MIB counters */
+       xm_write16(hw, port, XM_STAT_CMD,
+                       XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+       /* Clear two times according to Errata #3 */
+       xm_write16(hw, port, XM_STAT_CMD,
+                       XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
        /* configure Rx High Water Mark (XM_RX_HI_WM) */
        xm_write16(hw, port, XM_RX_HI_WM, 1450);