ACPI: PCI: lookup _PRT entry by PCI dev and pin, not segment/bus/dev/pin

There's no reason to pass around segment, bus, and device independently
when we can just pass the pci_dev pointer, which carries all those
already.

The pci_dev contains an interrupt pin, too, but we still have to pass both
the pci_dev and the pin because when we use a bridge to derive an IRQ, we
need the pin from the downstream device, not the bridge.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index c4a5c49809db81f4458cf79722ae837a65f31ff8..aabf8a965aff469caaa0063209239b416e775c74 100644 (file)
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -69,11 +69,13 @@ static inline char pin_name(int pin)
                          PCI IRQ Routing Table (PRT) Support
    -------------------------------------------------------------------------- */
 
-static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(int segment,
-                                                         int bus,
-                                                         int device, int pin)
+static struct acpi_prt_entry *acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
+                                                         int pin)
 {
        struct acpi_prt_entry *entry = NULL;
+       int segment = pci_domain_nr(dev->bus);
+       int bus = dev->bus->number;
+       int device = PCI_SLOT(dev->devfn);
 
        if (!acpi_prt.count)
                return NULL;
@@ -385,23 +387,18 @@ acpi_pci_free_irq(struct acpi_prt_entry *entry,
  * failure: return -1
  */
 static int
-acpi_pci_irq_lookup(struct pci_bus *bus,
-                   int device,
-                   int pin,
+acpi_pci_irq_lookup(struct pci_dev *dev, int pin,
                    int *triggering,
                    int *polarity, char **link, irq_lookup_func func)
 {
        struct acpi_prt_entry *entry = NULL;
-       int segment = pci_domain_nr(bus);
-       int bus_nr = bus->number;
        int ret;
 
 
-       ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                         "Searching for _PRT entry for %04x:%02x:%02x[%c]\n",
-                         segment, bus_nr, device, pin_name(pin)));
+       ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Searching for _PRT entry for %s[%c]\n",
+                         pci_name(dev), pin_name(pin)));
 
-       entry = acpi_pci_irq_find_prt_entry(segment, bus_nr, device, pin);
+       entry = acpi_pci_irq_find_prt_entry(dev, pin);
        if (!entry) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "_PRT entry not found\n"));
                return -1;
@@ -447,7 +444,7 @@ acpi_pci_irq_derive(struct pci_dev *dev,
                        pin = bridge_pin;
                }
 
-               irq = acpi_pci_irq_lookup(bridge->bus, PCI_SLOT(bridge->devfn),
+               irq = acpi_pci_irq_lookup(bridge,
                                          pin, triggering, polarity,
                                          link, func);
        }
@@ -493,7 +490,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
         * First we check the PCI IRQ routing table (PRT) for an IRQ.  PRT
         * values override any BIOS-assigned IRQs set during boot.
         */
-       gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
+       gsi = acpi_pci_irq_lookup(dev, pin,
                                  &triggering, &polarity, &link,
                                  acpi_pci_allocate_irq);
 
@@ -574,7 +571,7 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
        /*
         * First we check the PCI IRQ routing table (PRT) for an IRQ.
         */
-       gsi = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin,
+       gsi = acpi_pci_irq_lookup(dev, pin,
                                  &triggering, &polarity, NULL,
                                  acpi_pci_free_irq);
        /*