]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[B43]: Change loglevel of radio-enable message.
authorMichael Buesch <mb@bu3sch.de>
Wed, 19 Sep 2007 17:10:08 +0000 (19:10 +0200)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:52:21 +0000 (16:52 -0700)
Also cleanup the code a bit and remove the inline.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/wireless/b43/leds.c
drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/main.h

index 85d965de57911f2d660191e79476b181af7c7e90..0f155b4f34eb9e08b5483f81c71844d3e028c32e 100644 (file)
@@ -176,6 +176,7 @@ void b43_leds_update(struct b43_wldev *dev, int activity)
        unsigned long interval = 0;
        u16 ledctl;
        unsigned long flags;
+       bool radio_enabled = (phy->radio_on && dev->radio_hw_enable);
 
        spin_lock_irqsave(&dev->wl->leds_lock, flags);
        ledctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
@@ -195,21 +196,19 @@ void b43_leds_update(struct b43_wldev *dev, int activity)
                        turn_on = activity;
                        break;
                case B43_LED_RADIO_ALL:
-                       turn_on = phy->radio_on && b43_is_hw_radio_enabled(dev);
+                       turn_on = radio_enabled;
                        break;
                case B43_LED_RADIO_A:
-                       turn_on = (phy->radio_on && b43_is_hw_radio_enabled(dev)
-                                  && phy->type == B43_PHYTYPE_A);
+                       turn_on = (radio_enabled && phy->type == B43_PHYTYPE_A);
                        break;
                case B43_LED_RADIO_B:
-                       turn_on = (phy->radio_on && b43_is_hw_radio_enabled(dev)
-                                  && (phy->type == B43_PHYTYPE_B
-                                      || phy->type == B43_PHYTYPE_G));
+                       turn_on = (radio_enabled &&
+                                  (phy->type == B43_PHYTYPE_B
+                                   || phy->type == B43_PHYTYPE_G));
                        break;
                case B43_LED_MODE_BG:
                        if (phy->type == B43_PHYTYPE_G
-                           && b43_is_hw_radio_enabled(dev)
-                           && 1 /*FIXME: using G rates. */ )
+                           && radio_enabled)
                                turn_on = 1;
                        break;
                case B43_LED_TRANSFER:
index 66c89df51fb8f8ac5d209f49457c81b285308137..1390f41425f1abd4c330465f1a688336972b19a4 100644 (file)
@@ -2175,6 +2175,21 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
        b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_PRPHYCTL, tmp);
 }
 
+/* Returns TRUE, if the radio is enabled in hardware. */
+static bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
+{
+       if (dev->phy.rev >= 3) {
+               if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
+                     & B43_MMIO_RADIO_HWENABLED_HI_MASK))
+                       return 1;
+       } else {
+               if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
+                   & B43_MMIO_RADIO_HWENABLED_LO_MASK)
+                       return 1;
+       }
+       return 0;
+}
+
 /* This is the opposite of b43_chip_init() */
 static void b43_chip_exit(struct b43_wldev *dev)
 {
@@ -2214,7 +2229,7 @@ static int b43_chip_init(struct b43_wldev *dev)
        b43_radio_turn_on(dev);
        dev->radio_hw_enable = b43_is_hw_radio_enabled(dev);
        b43dbg(dev->wl, "Radio %s by hardware\n",
-              (dev->radio_hw_enable == 0) ? "disabled" : "enabled");
+              dev->radio_hw_enable ? "enabled" : "disabled");
 
        b43_write16(dev, 0x03E6, 0x0000);
        err = b43_phy_init(dev);
@@ -2373,14 +2388,14 @@ static void b43_periodic_every15sec(struct b43_wldev *dev)
 
 static void b43_periodic_every1sec(struct b43_wldev *dev)
 {
-       int radio_hw_enable;
+       bool radio_hw_enable;
 
        /* check if radio hardware enabled status changed */
        radio_hw_enable = b43_is_hw_radio_enabled(dev);
        if (unlikely(dev->radio_hw_enable != radio_hw_enable)) {
                dev->radio_hw_enable = radio_hw_enable;
-               b43dbg(dev->wl, "Radio hardware status changed to %s\n",
-                      (radio_hw_enable == 0) ? "disabled" : "enabled");
+               b43info(dev->wl, "Radio hardware status changed to %s\n",
+                       radio_hw_enable ? "ENABLED" : "DISABLED");
                b43_leds_update(dev, 0);
        }
 }
index bd8fcf72dc5d647995f2ec761a1e26146c92ca53..284d17da17d1ae73c56deb79e389697cf69c9068 100644 (file)
@@ -96,23 +96,6 @@ static inline int b43_is_ofdm_rate(int rate)
        return !b43_is_cck_rate(rate);
 }
 
-static inline int b43_is_hw_radio_enabled(struct b43_wldev *dev)
-{
-       /* function to return state of hardware enable of radio
-        * returns 0 if radio disabled, 1 if radio enabled
-        */
-       struct b43_phy *phy = &dev->phy;
-
-       if (phy->rev >= 3)
-               return ((b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
-                        & B43_MMIO_RADIO_HWENABLED_HI_MASK)
-                       == 0) ? 1 : 0;
-       else
-               return ((b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
-                        & B43_MMIO_RADIO_HWENABLED_LO_MASK)
-                       == 0) ? 0 : 1;
-}
-
 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf);
 void b43_tsf_write(struct b43_wldev *dev, u64 tsf);