=== 6. Module installation
--- 6.1 INSTALL_MOD_PATH
--- 6.2 INSTALL_MOD_DIR
- === 7. Module versioning
+ === 7. Module versioning & Module.symvers
+ --- 7.1 Symbols fron the kernel (vmlinux + modules)
+ --- 7.2 Symbols and external modules
+ --- 7.3 Symbols from another external module
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR
make -C $KDIR M=$PWD modules_install
Install the external module(s).
Installation default is in /lib/modules/<kernel-version>/extra,
- but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
+ but may be prefixed with INSTALL_MOD_PATH - see separate
+ chapter.
make -C $KDIR M=$PWD clean
Remove all generated files for the module - the kernel
=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
-=== 7. Module versioning
+=== 7. Module versioning & Module.symvers
Module versioning is enabled by the CONFIG_MODVERSIONS tag.
compared with similar values in the module. If they are not equal then the
kernel refuses to load the module.
-During a kernel build a file named Module.symvers will be generated. This
-file includes the symbol version of all symbols within the kernel. If the
-Module.symvers file is saved from the last full kernel compile one does not
-have to do a full kernel compile to build a module version's compatible module.
+Module.symvers contains a list of all exported symbols from a kernel build.
+--- 7.1 Symbols fron the kernel (vmlinux + modules)
+
+ During a kernel build a file named Module.symvers will be generated.
+ Module.symvers contains all exported symbols from the kernel and
+ compiled modules. For each symbols the corresponding CRC value
+ is stored too.
+
+ The syntax of the Module.symvers file is:
+ <CRC> <Symbol> <module>
+ Sample:
+ 0x2d036834 scsi_remove_host drivers/scsi/scsi_mod
+
+ For a kernel build without CONFIG_MODVERSIONING enabled the crc
+ would read: 0x00000000
+
+ Module.symvers serve two purposes.
+ 1) It list all exported symbols both from vmlinux and all modules
+ 2) It list CRC if CONFIG_MODVERSION is enabled
+
+--- 7.2 Symbols and external modules
+
+ When building an external module the build system needs access to
+ the symbols from the kernel to check if all external symbols are
+ defined. This is done in the MODPOST step and to obtain all
+ symbols modpost reads Module.symvers from the kernel.
+ If a Module.symvers file is present in the directory where
+ the external module is being build this file will be read too.
+ During the MODPOST step a new Module.symvers file will be written
+ containing all exported symbols that was not defined in the kernel.
+
+--- 7.3 Symbols from another external module
+
+ Sometimes one external module uses exported symbols from another
+ external module. Kbuild needs to have full knowledge on all symbols
+ to avoid spitting out warnings about undefined symbols.
+ Two solutions exist to let kbuild know all symbols of more than
+ one external module.
+ The method with a top-level kbuild file is recommended but may be
+ impractical in certain situations.
+
+ Use a top-level Kbuild file
+ If you have two modules: 'foo', 'bar' and 'foo' needs symbols
+ from 'bar' then one can use a common top-level kbuild file so
+ both modules are compiled in same build.
+
+ Consider following directory layout:
+ ./foo/ <= contains the foo module
+ ./bar/ <= contains the bar module
+ The top-level Kbuild file would then look like:
+
+ #./Kbuild: (this file may also be named Makefile)
+ obj-y := foo/ bar/
+
+ Executing:
+ make -C $KDIR M=`pwd`
+
+ will then do the expected and compile both modules with full
+ knowledge on symbols from both modules.
+
+ Use an extra Module.symvers file
+ When an external module is build a Module.symvers file is
+ generated containing all exported symbols which are not
+ defined in the kernel.
+ To get access to symbols from module 'bar' one can copy the
+ Module.symvers file from the compilation of the 'bar' module
+ to the directory where the 'foo' module is build.
+ During the module build kbuild will read the Module.symvers
+ file in the directory of the external module and when the
+ build is finished a new Module.symvers file is created
+ containing the sum of all symbols defined and not part of the
+ kernel.
+
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR
int have_vmlinux = 0;
/* Is CONFIG_MODULE_SRCVERSION_ALL set? */
static int all_versions = 0;
+/* If we are modposting external module set to 1 */
+static int external_module = 0;
void fatal(const char *fmt, ...)
{
va_end(arglist);
}
+static int is_vmlinux(const char *modname)
+{
+ const char *myname;
+
+ if ((myname = strrchr(modname, '/')))
+ myname++;
+ else
+ myname = modname;
+
+ return strcmp(myname, "vmlinux") == 0;
+}
+
void *do_nofail(void *ptr, const char *expr)
{
if (!ptr) {
unsigned int crc;
int crc_valid;
unsigned int weak:1;
+ unsigned int vmlinux:1; /* 1 if symbol is defined in vmlinux */
+ unsigned int kernel:1; /* 1 if symbol is from kernel
+ * (only for external modules) **/
char name[0];
};
}
/* For the hash of exported symbols */
-static void new_symbol(const char *name, struct module *module,
- unsigned int *crc)
+static struct symbol *new_symbol(const char *name, struct module *module)
{
unsigned int hash;
struct symbol *new;
hash = tdb_hash(name) % SYMBOL_HASH_SIZE;
new = symbolhash[hash] = alloc_symbol(name, 0, symbolhash[hash]);
new->module = module;
- if (crc) {
- new->crc = *crc;
- new->crc_valid = 1;
- }
+ return new;
}
static struct symbol *find_symbol(const char *name)
* Add an exported symbol - it may have already been added without a
* CRC, in this case just update the CRC
**/
-static void add_exported_symbol(const char *name, struct module *module,
- unsigned int *crc)
+static struct symbol *sym_add_exported(const char *name, struct module *mod)
{
struct symbol *s = find_symbol(name);
- if (!s) {
- new_symbol(name, module, crc);
- return;
- }
- if (crc) {
- s->crc = *crc;
- s->crc_valid = 1;
- }
+ if (!s)
+ s = new_symbol(name, mod);
+
+ s->vmlinux = is_vmlinux(mod->name);
+ s->kernel = 0;
+ return s;
+}
+
+static void sym_update_crc(const char *name, struct module *mod,
+ unsigned int crc)
+{
+ struct symbol *s = find_symbol(name);
+
+ if (!s)
+ s = new_symbol(name, mod);
+ s->crc = crc;
+ s->crc_valid = 1;
}
void *grab_file(const char *filename, unsigned long *size)
/* CRC'd symbol */
if (memcmp(symname, CRC_PFX, strlen(CRC_PFX)) == 0) {
crc = (unsigned int) sym->st_value;
- add_exported_symbol(symname + strlen(CRC_PFX),
- mod, &crc);
+ sym_update_crc(symname + strlen(CRC_PFX), mod, crc);
}
break;
case SHN_UNDEF:
default:
/* All exported symbols */
if (memcmp(symname, KSYMTAB_PFX, strlen(KSYMTAB_PFX)) == 0) {
- add_exported_symbol(symname + strlen(KSYMTAB_PFX),
- mod, NULL);
+ sym_add_exported(symname + strlen(KSYMTAB_PFX), mod);
}
if (strcmp(symname, MODULE_SYMBOL_PREFIX "init_module") == 0)
mod->has_init = 1;
}
}
-static int is_vmlinux(const char *modname)
-{
- const char *myname;
-
- if ((myname = strrchr(modname, '/')))
- myname++;
- else
- myname = modname;
-
- return strcmp(myname, "vmlinux") == 0;
-}
-
/**
* Parse tag=value strings from .modinfo section
**/
/* When there's no vmlinux, don't print warnings about
* unresolved symbols (since there'll be too many ;) */
if (is_vmlinux(modname)) {
- unsigned int fake_crc = 0;
have_vmlinux = 1;
- add_exported_symbol("struct_module", mod, &fake_crc);
mod->skip = 1;
}
fclose(file);
}
-static void read_dump(const char *fname)
+static void read_dump(const char *fname, unsigned int kernel)
{
unsigned long size, pos = 0;
void *file = grab_file(fname, &size);
char *symname, *modname, *d;
unsigned int crc;
struct module *mod;
+ struct symbol *s;
if (!(symname = strchr(line, '\t')))
goto fail;
mod = new_module(NOFAIL(strdup(modname)));
mod->skip = 1;
}
- add_exported_symbol(symname, mod, &crc);
+ s = sym_add_exported(symname, mod);
+ s->kernel = kernel;
+ sym_update_crc(symname, mod, crc);
}
return;
fail:
fatal("parse error in symbol dump file\n");
}
+/* For normal builds always dump all symbols.
+ * For external modules only dump symbols
+ * that are not read from kernel Module.symvers.
+ **/
+static int dump_sym(struct symbol *sym)
+{
+ if (!external_module)
+ return 1;
+ if (sym->vmlinux || sym->kernel)
+ return 0;
+ return 1;
+}
+
static void write_dump(const char *fname)
{
struct buffer buf = { };
for (n = 0; n < SYMBOL_HASH_SIZE ; n++) {
symbol = symbolhash[n];
while (symbol) {
- symbol = symbol->next;
- }
- }
-
- for (n = 0; n < SYMBOL_HASH_SIZE ; n++) {
- symbol = symbolhash[n];
- while (symbol) {
- buf_printf(&buf, "0x%08x\t%s\t%s\n", symbol->crc,
- symbol->name, symbol->module->name);
+ if (dump_sym(symbol))
+ buf_printf(&buf, "0x%08x\t%s\t%s\n",
+ symbol->crc, symbol->name,
+ symbol->module->name);
symbol = symbol->next;
}
}
struct module *mod;
struct buffer buf = { };
char fname[SZ];
- char *dump_read = NULL, *dump_write = NULL;
+ char *kernel_read = NULL, *module_read = NULL;
+ char *dump_write = NULL;
int opt;
- while ((opt = getopt(argc, argv, "i:mo:a")) != -1) {
+ while ((opt = getopt(argc, argv, "i:I:mo:a")) != -1) {
switch(opt) {
case 'i':
- dump_read = optarg;
+ kernel_read = optarg;
+ break;
+ case 'I':
+ module_read = optarg;
+ external_module = 1;
break;
case 'm':
modversions = 1;
}
}
- if (dump_read)
- read_dump(dump_read);
+ if (kernel_read)
+ read_dump(kernel_read, 1);
+ if (module_read)
+ read_dump(module_read, 0);
while (optind < argc) {
read_symbols(argv[optind++]);
projects / linux-2.6-omap-h63xx.git / commitdiff