#include "em28xx.h"
#include "tuner-xc2028.h"
+static int tuner = -1;
+module_param(tuner, int, 0444);
+MODULE_PARM_DESC(tuner, "tuner type");
+
+struct em28xx_hash_table {
+ unsigned long hash;
+ unsigned int model;
+ unsigned int tuner;
+};
+
struct em28xx_board em28xx_boards[] = {
[EM2800_BOARD_UNKNOWN] = {
.name = "Unknown EM2800 video grabber",
{ USB_DEVICE(0x0ccd, 0x0047), .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
{ },
};
+MODULE_DEVICE_TABLE (usb, em28xx_id_table);
+
+static struct em28xx_hash_table em28xx_hash [] = {
+ { 0, 0, 0 },
+};
+/* Since em28xx_pre_card_setup() requires a proper dev->model,
+ * this won't work for boards with generic PCI IDs
+ */
void em28xx_pre_card_setup(struct em28xx *dev)
{
/* request some modules */
switch(dev->model){
- case EM2880_BOARD_TERRATEC_PRODIGY_XS:
- case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
- case EM2880_BOARD_TERRATEC_HYBRID_XS:
- {
- em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO?
- break;
- }
+ case EM2880_BOARD_TERRATEC_PRODIGY_XS:
+ case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2880_BOARD_TERRATEC_HYBRID_XS:
+ /* reset through GPIO? */
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1);
+ break;
+ }
+}
+
+static int em28xx_tuner_callback(void *ptr, int command, int arg)
+{
+ int rc = 0;
+ struct em28xx *dev = ptr;
+
+ if (dev->tuner_type != TUNER_XC2028)
+ return 0;
+
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* FIXME: This is device-dependent */
+ dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+ dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
+
+ msleep(140);
+ break;
}
+ return rc;
}
static void em28xx_config_tuner (struct em28xx *dev)
{
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
+ struct tuner_setup tun_setup;
+ struct v4l2_frequency f;
+
+ if (!dev->has_tuner)
+ return;
+
+ tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+ tun_setup.type = dev->tuner_type;
+ tun_setup.addr = dev->tuner_addr;
+ tun_setup.tuner_callback = em28xx_tuner_callback;
+
+ em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+
+ if (dev->tuner_type == TUNER_XC2028) {
+ memset (&ctl, 0, sizeof(ctl));
+
+ ctl.fname = XC2028_DEFAULT_FIRMWARE;
+ ctl.max_len = 64;
+
+ xc2028_cfg.tuner = TUNER_XC2028;
+ xc2028_cfg.priv = &ctl;
- memset (&ctl,0,sizeof(ctl));
+ em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ }
+
+ /* configure tuner */
+ f.tuner = 0;
+ f.type = V4L2_TUNER_ANALOG_TV;
+ f.frequency = 9076; /* just a magic number */
+ dev->ctl_freq = f.frequency;
+ em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+}
+
+static int em28xx_hint_board(struct em28xx *dev)
+{
+ int i;
- ctl.fname = XC2028_DEFAULT_FIRMWARE;
- ctl.max_len = 64;
+ for (i = 0; i < ARRAY_SIZE(em28xx_hash); i++) {
+ if (dev->hash == em28xx_hash[i].hash) {
+ dev->model = em28xx_hash[i].model;
+ dev->tuner_type = em28xx_hash[i].tuner;
- xc2028_cfg.tuner = TUNER_XC2028;
- xc2028_cfg.priv = &ctl;
+ em28xx_errdev("Your board has no unique USB ID.\n");
+ em28xx_errdev("A hint were successfully done, "
+ "based on eeprom hash.\n");
+ em28xx_errdev("This method is not 100%% failproof.\n");
+ em28xx_errdev("If the board were missdetected, "
+ "please email this log to:\n");
+ em28xx_errdev("\tV4L Mailing List "
+ " <video4linux-list@redhat.com>\n");
+ em28xx_errdev("Board detected as %s\n",
+ em28xx_boards[dev->model].name);
- em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+ return 0;
+ }
+ }
+ em28xx_errdev("Your board has no unique USB ID and thus need a "
+ "hint to be detected.\n");
+ em28xx_errdev("You may try to use card=<n> insmod option to "
+ "workaround that.\n");
+ em28xx_errdev("Please send an email with this log to:\n");
+ em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
+ em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
+
+ em28xx_errdev("Here is a list of valid choices for the card=<n>"
+ " insmod option:\n");
+ for (i = 0; i < em28xx_bcount; i++) {
+ em28xx_errdev(" card=%d -> %s\n",
+ i, em28xx_boards[i].name);
+ }
+ return -1;
}
void em28xx_card_setup(struct em28xx *dev)
{
/* request some modules */
- switch(dev->model){
- case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
- {
- struct tveeprom tv;
+ switch (dev->model) {
+ case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
+ {
+ struct tveeprom tv;
#ifdef CONFIG_MODULES
- request_module("tveeprom");
- request_module("ir-kbd-i2c");
- request_module("msp3400");
+ request_module("tveeprom");
+ request_module("ir-kbd-i2c");
#endif
- /* Call first TVeeprom */
-
- dev->i2c_client.addr = 0xa0 >> 1;
- tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
-
- dev->tuner_type= tv.tuner_type;
- if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
- dev->i2s_speed=2048000;
- dev->has_msp34xx=1;
- } else
- dev->has_msp34xx=0;
- break;
- }
- case EM2820_BOARD_KWORLD_PVRTV2800RF:
- {
- em28xx_write_regs_req(dev,0x00,0x08, "\xf9", 1); // GPIO enables sound on KWORLD PVR TV 2800RF
- break;
- }
+ /* Call first TVeeprom */
+
+ dev->i2c_client.addr = 0xa0 >> 1;
+ tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
+ dev->tuner_type = tv.tuner_type;
+ if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
+ dev->i2s_speed = 2048000;
+ dev->has_msp34xx = 1;
+ }
+ break;
}
+ case EM2820_BOARD_KWORLD_PVRTV2800RF:
+ /* GPIO enables sound on KWORLD PVR TV 2800RF */
+ em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1);
+ break;
+ case EM2820_BOARD_UNKNOWN:
+ case EM2800_BOARD_UNKNOWN:
+ em28xx_hint_board(dev);
+ }
+
+ dev->is_em2800 = em28xx_boards[dev->model].is_em2800;
+ dev->has_tuner = em28xx_boards[dev->model].has_tuner;
+ dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx;
+ dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
+ dev->decoder = em28xx_boards[dev->model].decoder;
+ dev->video_inputs = em28xx_boards[dev->model].vchannels;
+
+ if (tuner >= 0)
+ dev->tuner_type = tuner;
+
+#ifdef CONFIG_MODULES
+ /* request some modules */
+ if (dev->has_msp34xx)
+ request_module("msp3400");
+ if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
+ request_module("saa7115");
+ if (dev->decoder == EM28XX_TVP5150)
+ request_module("tvp5150");
+ if (dev->has_tuner)
+ request_module("tuner");
+#endif
+
em28xx_config_tuner (dev);
}
-
-MODULE_DEVICE_TABLE (usb, em28xx_id_table);
return rc;
}
+/* based on linux/sunrpc/svcauth.h and linux/hash.h
+ * The original hash function returns a different value, if arch is x86_64
+ * or i386.
+ */
+static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
+{
+ unsigned long hash = 0;
+ unsigned long l = 0;
+ int len = 0;
+ unsigned char c;
+ do {
+ if (len == length) {
+ c = (char)len;
+ len = -1;
+ } else
+ c = *buf++;
+ l = (l << 8) | c;
+ len++;
+ if ((len & (32 / 8 - 1)) == 0)
+ hash = ((hash^l) * 0x9e370001UL);
+ } while (len);
+
+ return (hash >> (32 - bits)) & 0xffffffffUL;
+}
+
static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
{
unsigned char buf, *p = eedata;
printk("\n");
}
- printk(KERN_INFO "EEPROM ID= 0x%08x\n", em_eeprom->id);
+ if (em_eeprom->id == 0x9567eb1a)
+ dev->hash = em28xx_hash_mem(eedata, len, 32);
+
+ printk(KERN_INFO "EEPROM ID= 0x%08x, hash = 0x%08lx\n",
+ em_eeprom->id, dev->hash);
printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID,
em_eeprom->product_ID);
}
-static int em28xx_tuner_callback(void *ptr, int command, int arg)
-{
- int rc = 0;
- struct em28xx *dev = ptr;
-
- if (dev->tuner_type != TUNER_XC2028)
- return 0;
-
- switch (command) {
- case XC2028_TUNER_RESET:
- /* FIXME: This is device-dependent */
- dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
- dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
-
- msleep(140);
- break;
- }
- return rc;
-}
-
-static int em28xx_set_tuner(int check_eeprom, struct i2c_client *client)
-{
- struct em28xx *dev = client->adapter->algo_data;
- struct tuner_setup tun_setup;
-
- if (dev->has_tuner) {
- tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
- tun_setup.type = dev->tuner_type;
- tun_setup.addr = dev->tuner_addr;
- tun_setup.tuner_callback = em28xx_tuner_callback;
-
- em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
- }
-
- return (0);
-}
-
/*
* attach_inform()
* gets called when a device attaches to the i2c bus
break;
default:
+ if (!dev->tuner_addr)
+ dev->tuner_addr = client->addr;
+
dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1);
- dev->tuner_addr = client->addr;
- em28xx_set_tuner(-1, client);
+
}
return 0;
#include <linux/mutex.h>
#include "em28xx.h"
-#include <media/tuner.h>
#include <media/v4l2-common.h>
#include <media/msp3400.h>
MODULE_PARM_DESC(video_nr,"video device numbers");
MODULE_PARM_DESC(vbi_nr,"vbi device numbers");
-static int tuner = -1;
-module_param(tuner, int, 0444);
-MODULE_PARM_DESC(tuner, "tuner type");
-
static unsigned int video_debug = 0;
module_param(video_debug,int,0644);
MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
*/
static void em28xx_config_i2c(struct em28xx *dev)
{
- struct v4l2_frequency f;
struct v4l2_routing route;
route.input = INPUT(dev->ctl_input)->vmux;
em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
-
- /* configure tuner */
- f.tuner = 0;
- f.type = V4L2_TUNER_ANALOG_TV;
- f.frequency = 9076; /* FIXME:remove magic number */
- dev->ctl_freq = f.frequency;
- em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
}
/*
* allocates and inits the device structs, registers i2c bus and v4l device
*/
static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
- int minor, int model)
+ int minor)
{
struct em28xx *dev = *devhandle;
int retval = -ENOMEM;
unsigned int maxh, maxw;
dev->udev = udev;
- dev->model = model;
mutex_init(&dev->lock);
init_waitqueue_head(&dev->open);
dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
dev->em28xx_write_regs_req = em28xx_write_regs_req;
dev->em28xx_read_reg_req = em28xx_read_reg_req;
- dev->is_em2800 = em28xx_boards[model].is_em2800;
- dev->has_tuner = em28xx_boards[model].has_tuner;
- dev->has_msp34xx = em28xx_boards[model].has_msp34xx;
- dev->tda9887_conf = em28xx_boards[model].tda9887_conf;
- dev->decoder = em28xx_boards[model].decoder;
-
- if (tuner >= 0)
- dev->tuner_type = tuner;
- else
- dev->tuner_type = em28xx_boards[model].tuner_type;
-
- dev->video_inputs = em28xx_boards[model].vchannels;
-
- for (i = 0; i < TVNORMS; i++)
- if (em28xx_boards[model].norm == tvnorms[i].mode)
- break;
- if (i == TVNORMS)
- i = 0;
-
- dev->tvnorm = &tvnorms[i]; /* set default norm */
-
- em28xx_videodbg("tvnorm=%s\n", dev->tvnorm->name);
-
- maxw = norm_maxw(dev);
- maxh = norm_maxh(dev);
-
- /* set default image size */
- dev->width = maxw;
- dev->height = maxh;
- dev->interlaced = EM28XX_INTERLACED_DEFAULT;
- dev->field_size = dev->width * dev->height;
- dev->frame_size =
- dev->interlaced ? dev->field_size << 1 : dev->field_size;
- dev->bytesperline = dev->width * 2;
- dev->hscale = 0;
- dev->vscale = 0;
- dev->ctl_input = 2;
/* setup video picture settings for saa7113h */
memset(&dev->vpic, 0, sizeof(dev->vpic));
dev->vpic.palette = VIDEO_PALETTE_YUV422;
em28xx_pre_card_setup(dev);
-#ifdef CONFIG_MODULES
- /* request some modules */
- if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)
- request_module("saa7115");
- if (dev->decoder == EM28XX_TVP5150)
- request_module("tvp5150");
- if (dev->has_tuner)
- request_module("tuner");
-#endif
+
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- em28xx_devused&=~(1<<dev->devno);
+ em28xx_devused &= ~(1<<dev->devno);
kfree(dev);
return -ENOMEM;
}
mutex_lock(&dev->lock);
+
/* register i2c bus */
em28xx_i2c_register(dev);
mutex_unlock(&dev->lock);
+ for (i = 0; i < TVNORMS; i++)
+ if (em28xx_boards[dev->model].norm == tvnorms[i].mode)
+ break;
+ if (i == TVNORMS)
+ i = 0;
+
+ dev->tvnorm = &tvnorms[i]; /* set default norm */
+
+ em28xx_videodbg("tvnorm=%s\n", dev->tvnorm->name);
+
+ maxw = norm_maxw(dev);
+ maxh = norm_maxh(dev);
+
+ /* set default image size */
+ dev->width = maxw;
+ dev->height = maxh;
+ dev->interlaced = EM28XX_INTERLACED_DEFAULT;
+ dev->field_size = dev->width * dev->height;
+ dev->frame_size =
+ dev->interlaced ? dev->field_size << 1 : dev->field_size;
+ dev->bytesperline = dev->width * 2;
+ dev->hscale = 0;
+ dev->vscale = 0;
+ dev->ctl_input = 2;
+
errCode = em28xx_config(dev);
-#ifdef CONFIG_MODULES
- if (dev->has_msp34xx)
- request_module("msp3400");
-#endif
/* allocate and fill v4l2 device struct */
dev->vdev = video_device_alloc();
if (NULL == dev->vdev) {
struct usb_interface *uif;
struct em28xx *dev = NULL;
int retval = -ENODEV;
- int model,i,nr,ifnum;
+ int i, nr, ifnum;
udev = usb_get_dev(interface_to_usbdev(interface));
ifnum = interface->altsetting[0].desc.bInterfaceNumber;
return -ENODEV;
}
- model=id->driver_info;
-
if (nr >= EM28XX_MAXBOARDS) {
printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS);
em28xx_devused&=~(1<<nr);
}
snprintf(dev->name, 29, "em28xx #%d", nr);
- dev->devno=nr;
+ dev->devno = nr;
+ dev->model = id->driver_info;
/* compute alternate max packet sizes */
uif = udev->actconfig->interface[0];
}
if ((card[nr]>=0)&&(card[nr]<em28xx_bcount))
- model=card[nr];
-
- if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) {
- em28xx_errdev("Your board has no unique USB ID and thus can't be autodetected.\n");
- em28xx_errdev("Please pass card=<n> insmod option to workaround that.\n");
- em28xx_errdev("If there isn't any card number for you, please send an email to:\n");
- em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
- em28xx_errdev("Here is a list of valid choices for the card=<n> insmod option:\n");
- for (i = 0; i < em28xx_bcount; i++) {
- em28xx_errdev(" card=%d -> %s\n", i,
- em28xx_boards[i].name);
- }
- }
+ dev->model = card[nr];
/* allocate device struct */
- retval = em28xx_init_dev(&dev, udev, nr, model);
+ retval = em28xx_init_dev(&dev, udev, nr);
if (retval)
return retval;
- em28xx_info("Found %s\n", em28xx_boards[model].name);
+ em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
int interlaced; /* 1=interlace fileds, 0=just top fileds */
int type;
+ unsigned long hash; /* eeprom hash - for boards with generic ID */
+
/* states */
enum em28xx_dev_state state;
enum em28xx_stream_state stream;
projects / linux-2.6-omap-h63xx.git / commitdiff