--- /dev/null
+/*
+ i2c Support for Apple SMU Controller
+
+ Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+ <benh@kernel.crashing.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/smu.h>
+
+static int probe;
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple's SMU");
+MODULE_LICENSE("GPL");
+module_param(probe, bool, 0);
+
+
+/* Physical interface */
+struct smu_iface
+{
+ struct i2c_adapter adapter;
+ struct completion complete;
+ u32 busid;
+};
+
+static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
+{
+ struct smu_iface *iface = misc;
+ complete(&iface->complete);
+}
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 smu_smbus_xfer( struct i2c_adapter* adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data* data)
+{
+ struct smu_iface *iface = i2c_get_adapdata(adap);
+ struct smu_i2c_cmd cmd;
+ int rc = 0;
+ int read = (read_write == I2C_SMBUS_READ);
+
+ cmd.info.bus = iface->busid;
+ cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
+
+ /* Prepare datas & select mode */
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+ cmd.info.datalen = 0;
+ break;
+ case I2C_SMBUS_BYTE:
+ cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
+ cmd.info.datalen = 1;
+ if (!read)
+ cmd.info.data[0] = data->byte;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = 1;
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ if (!read)
+ cmd.info.data[0] = data->byte;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = 2;
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ if (!read) {
+ cmd.info.data[0] = data->byte & 0xff;
+ cmd.info.data[1] = (data->byte >> 8) & 0xff;
+ }
+ break;
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = data->block[0] + 1;
+ if (cmd.info.datalen > 6)
+ return -EINVAL;
+ if (!read)
+ memcpy(cmd.info.data, data->block, cmd.info.datalen);
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
+ cmd.info.datalen = data->block[0];
+ if (cmd.info.datalen > 7)
+ return -EINVAL;
+ if (!read)
+ memcpy(cmd.info.data, &data->block[1],
+ cmd.info.datalen);
+ cmd.info.sublen = 1;
+ cmd.info.subaddr[0] = command;
+ cmd.info.subaddr[1] = 0;
+ cmd.info.subaddr[2] = 0;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Turn a standardsub read into a combined mode access */
+ if (read_write == I2C_SMBUS_READ &&
+ cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
+ cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
+
+ /* Finish filling command and submit it */
+ cmd.done = smu_i2c_done;
+ cmd.misc = iface;
+ rc = smu_queue_i2c(&cmd);
+ if (rc < 0)
+ return rc;
+ wait_for_completion(&iface->complete);
+ rc = cmd.status;
+
+ if (!read || rc < 0)
+ return rc;
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = cmd.info.data[0];
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ data->word = ((u16)cmd.info.data[1]) << 8;
+ data->word |= cmd.info.data[0];
+ break;
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
+ break;
+ }
+
+ return rc;
+}
+
+static u32
+smu_smbus_func(struct i2c_adapter * adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+/* For now, we only handle combined mode (smbus) */
+static struct i2c_algorithm smu_algorithm = {
+ .smbus_xfer = smu_smbus_xfer,
+ .functionality = smu_smbus_func,
+};
+
+static int create_iface(struct device_node *np, struct device *dev)
+{
+ struct smu_iface* iface;
+ u32 *reg, busid;
+ int rc;
+
+ reg = (u32 *)get_property(np, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
+ return -ENXIO;
+ }
+ busid = *reg;
+
+ iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+ if (iface == NULL) {
+ printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
+ return -ENOMEM;
+ }
+ memset(iface, 0, sizeof(struct smu_iface));
+ init_completion(&iface->complete);
+ iface->busid = busid;
+
+ dev_set_drvdata(dev, iface);
+
+ sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
+ iface->adapter.algo = &smu_algorithm;
+ iface->adapter.algo_data = NULL;
+ iface->adapter.client_register = NULL;
+ iface->adapter.client_unregister = NULL;
+ i2c_set_adapdata(&iface->adapter, iface);
+ iface->adapter.dev.parent = dev;
+
+ rc = i2c_add_adapter(&iface->adapter);
+ if (rc) {
+ printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
+ "failed\n", iface->adapter.name);
+ i2c_set_adapdata(&iface->adapter, NULL);
+ }
+
+ if (probe) {
+ unsigned char addr;
+ printk("Probe: ");
+ for (addr = 0x00; addr <= 0x7f; addr++) {
+ if (i2c_smbus_xfer(&iface->adapter,addr,
+ 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
+ printk("%02x ", addr);
+ }
+ printk("\n");
+ }
+
+ printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
+
+ return 0;
+}
+
+static int dispose_iface(struct device *dev)
+{
+ struct smu_iface *iface = dev_get_drvdata(dev);
+ int rc;
+
+ rc = i2c_del_adapter(&iface->adapter);
+ i2c_set_adapdata(&iface->adapter, NULL);
+ /* We aren't that prepared to deal with this... */
+ if (rc)
+ printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
+ iface->adapter.name);
+ dev_set_drvdata(dev, NULL);
+ kfree(iface);
+
+ return 0;
+}
+
+
+static int create_iface_of_platform(struct of_device* dev,
+ const struct of_device_id *match)
+{
+ return create_iface(dev->node, &dev->dev);
+}
+
+
+static int dispose_iface_of_platform(struct of_device* dev)
+{
+ return dispose_iface(&dev->dev);
+}
+
+
+static struct of_device_id i2c_smu_match[] =
+{
+ {
+ .compatible = "smu-i2c",
+ },
+ {},
+};
+static struct of_platform_driver i2c_smu_of_platform_driver =
+{
+ .name = "i2c-smu",
+ .match_table = i2c_smu_match,
+ .probe = create_iface_of_platform,
+ .remove = dispose_iface_of_platform
+};
+
+
+static int __init i2c_pmac_smu_init(void)
+{
+ of_register_driver(&i2c_smu_of_platform_driver);
+ return 0;
+}
+
+
+static void __exit i2c_pmac_smu_cleanup(void)
+{
+ of_unregister_driver(&i2c_smu_of_platform_driver);
+}
+
+module_init(i2c_pmac_smu_init);
+module_exit(i2c_pmac_smu_cleanup);
*/
/*
- * For now, this driver includes:
- * - RTC get & set
- * - reboot & shutdown commands
- * all synchronous with IRQ disabled (ugh)
- *
* TODO:
- * rework in a way the PMU driver works, that is asynchronous
- * with a queue of commands. I'll do that as soon as I have an
- * SMU based machine at hand. Some more cleanup is needed too,
- * like maybe fitting it into a platform device, etc...
- * Also check what's up with cache coherency, and if we really
- * can't do better than flushing the cache, maybe build a table
- * of command len/reply len like the PMU driver to only flush
- * what is actually necessary.
- * --BenH.
+ * - maybe add timeout to commands ?
+ * - blocking version of time functions
+ * - polling version of i2c commands (including timer that works with
+ * interrutps off)
+ * - maybe avoid some data copies with i2c by directly using the smu cmd
+ * buffer and a lower level internal interface
+ * - understand SMU -> CPU events and implement reception of them via
+ * the userland interface
*/
#include <linux/config.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/rtc.h>
+#include <linux/completion.h>
+#include <linux/miscdevice.h>
+#include <linux/delay.h>
+#include <linux/sysdev.h>
+#include <linux/poll.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/smu.h>
#include <asm/sections.h>
#include <asm/abs_addr.h>
+#include <asm/uaccess.h>
+#include <asm/of_device.h>
+
+#define VERSION "0.6"
+#define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp."
-#define DEBUG_SMU 1
+#undef DEBUG_SMU
#ifdef DEBUG_SMU
#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
/*
* This is the command buffer passed to the SMU hardware
*/
+#define SMU_MAX_DATA 254
+
struct smu_cmd_buf {
u8 cmd;
u8 length;
- u8 data[0x0FFE];
+ u8 data[SMU_MAX_DATA];
};
struct smu_device {
spinlock_t lock;
struct device_node *of_node;
- int db_ack; /* doorbell ack GPIO */
- int db_req; /* doorbell req GPIO */
+ struct of_device *of_dev;
+ int doorbell; /* doorbell gpio */
u32 __iomem *db_buf; /* doorbell buffer */
+ int db_irq;
+ int msg;
+ int msg_irq;
struct smu_cmd_buf *cmd_buf; /* command buffer virtual */
u32 cmd_buf_abs; /* command buffer absolute */
+ struct list_head cmd_list;
+ struct smu_cmd *cmd_cur; /* pending command */
+ struct list_head cmd_i2c_list;
+ struct smu_i2c_cmd *cmd_i2c_cur; /* pending i2c command */
+ struct timer_list i2c_timer;
};
/*
*/
static struct smu_device *smu;
+
/*
- * SMU low level communication stuff
+ * SMU driver low level stuff
*/
-static inline int smu_cmd_stat(struct smu_cmd_buf *cmd_buf, u8 cmd_ack)
-{
- rmb();
- return cmd_buf->cmd == cmd_ack && cmd_buf->length != 0;
-}
-static inline u8 smu_save_ack_cmd(struct smu_cmd_buf *cmd_buf)
+static void smu_start_cmd(void)
{
- return (~cmd_buf->cmd) & 0xff;
-}
+ unsigned long faddr, fend;
+ struct smu_cmd *cmd;
-static void smu_send_cmd(struct smu_device *dev)
-{
- /* SMU command buf is currently cacheable, we need a physical
- * address. This isn't exactly a DMA mapping here, I suspect
+ if (list_empty(&smu->cmd_list))
+ return;
+
+ /* Fetch first command in queue */
+ cmd = list_entry(smu->cmd_list.next, struct smu_cmd, link);
+ smu->cmd_cur = cmd;
+ list_del(&cmd->link);
+
+ DPRINTK("SMU: starting cmd %x, %d bytes data\n", cmd->cmd,
+ cmd->data_len);
+ DPRINTK("SMU: data buffer: %02x %02x %02x %02x ...\n",
+ ((u8 *)cmd->data_buf)[0], ((u8 *)cmd->data_buf)[1],
+ ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3]);
+
+ /* Fill the SMU command buffer */
+ smu->cmd_buf->cmd = cmd->cmd;
+ smu->cmd_buf->length = cmd->data_len;
+ memcpy(smu->cmd_buf->data, cmd->data_buf, cmd->data_len);
+
+ /* Flush command and data to RAM */
+ faddr = (unsigned long)smu->cmd_buf;
+ fend = faddr + smu->cmd_buf->length + 2;
+ flush_inval_dcache_range(faddr, fend);
+
+ /* This isn't exactly a DMA mapping here, I suspect
* the SMU is actually communicating with us via i2c to the
* northbridge or the CPU to access RAM.
*/
- writel(dev->cmd_buf_abs, dev->db_buf);
+ writel(smu->cmd_buf_abs, smu->db_buf);
/* Ring the SMU doorbell */
- pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, dev->db_req, 4);
- pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, dev->db_req, 4);
+ pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, smu->doorbell, 4);
}
-static int smu_cmd_done(struct smu_device *dev)
+
+static irqreturn_t smu_db_intr(int irq, void *arg, struct pt_regs *regs)
{
- unsigned long wait = 0;
- int gpio;
+ unsigned long flags;
+ struct smu_cmd *cmd;
+ void (*done)(struct smu_cmd *cmd, void *misc) = NULL;
+ void *misc = NULL;
+ u8 gpio;
+ int rc = 0;
- /* Check the SMU doorbell */
- do {
- gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO,
- NULL, dev->db_ack);
- if ((gpio & 7) == 7)
- return 0;
- udelay(100);
- } while(++wait < 10000);
+ /* SMU completed the command, well, we hope, let's make sure
+ * of it
+ */
+ spin_lock_irqsave(&smu->lock, flags);
- printk(KERN_ERR "SMU timeout !\n");
- return -ENXIO;
+ gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell);
+ if ((gpio & 7) != 7)
+ return IRQ_HANDLED;
+
+ cmd = smu->cmd_cur;
+ smu->cmd_cur = NULL;
+ if (cmd == NULL)
+ goto bail;
+
+ if (rc == 0) {
+ unsigned long faddr;
+ int reply_len;
+ u8 ack;
+
+ /* CPU might have brought back the cache line, so we need
+ * to flush again before peeking at the SMU response. We
+ * flush the entire buffer for now as we haven't read the
+ * reply lenght (it's only 2 cache lines anyway)
+ */
+ faddr = (unsigned long)smu->cmd_buf;
+ flush_inval_dcache_range(faddr, faddr + 256);
+
+ /* Now check ack */
+ ack = (~cmd->cmd) & 0xff;
+ if (ack != smu->cmd_buf->cmd) {
+ DPRINTK("SMU: incorrect ack, want %x got %x\n",
+ ack, smu->cmd_buf->cmd);
+ rc = -EIO;
+ }
+ reply_len = rc == 0 ? smu->cmd_buf->length : 0;
+ DPRINTK("SMU: reply len: %d\n", reply_len);
+ if (reply_len > cmd->reply_len) {
+ printk(KERN_WARNING "SMU: reply buffer too small,"
+ "got %d bytes for a %d bytes buffer\n",
+ reply_len, cmd->reply_len);
+ reply_len = cmd->reply_len;
+ }
+ cmd->reply_len = reply_len;
+ if (cmd->reply_buf && reply_len)
+ memcpy(cmd->reply_buf, smu->cmd_buf->data, reply_len);
+ }
+
+ /* Now complete the command. Write status last in order as we lost
+ * ownership of the command structure as soon as it's no longer -1
+ */
+ done = cmd->done;
+ misc = cmd->misc;
+ mb();
+ cmd->status = rc;
+ bail:
+ /* Start next command if any */
+ smu_start_cmd();
+ spin_unlock_irqrestore(&smu->lock, flags);
+
+ /* Call command completion handler if any */
+ if (done)
+ done(cmd, misc);
+
+ /* It's an edge interrupt, nothing to do */
+ return IRQ_HANDLED;
}
-static int smu_do_cmd(struct smu_device *dev)
+
+static irqreturn_t smu_msg_intr(int irq, void *arg, struct pt_regs *regs)
{
- int rc;
- u8 cmd_ack;
+ /* I don't quite know what to do with this one, we seem to never
+ * receive it, so I suspect we have to arm it someway in the SMU
+ * to start getting events that way.
+ */
+
+ printk(KERN_INFO "SMU: message interrupt !\n");
- DPRINTK("SMU do_cmd %02x len=%d %02x\n",
- dev->cmd_buf->cmd, dev->cmd_buf->length,
- dev->cmd_buf->data[0]);
+ /* It's an edge interrupt, nothing to do */
+ return IRQ_HANDLED;
+}
- cmd_ack = smu_save_ack_cmd(dev->cmd_buf);
- /* Clear cmd_buf cache lines */
- flush_inval_dcache_range((unsigned long)dev->cmd_buf,
- ((unsigned long)dev->cmd_buf) +
- sizeof(struct smu_cmd_buf));
- smu_send_cmd(dev);
- rc = smu_cmd_done(dev);
- if (rc == 0)
- rc = smu_cmd_stat(dev->cmd_buf, cmd_ack) ? 0 : -1;
+/*
+ * Queued command management.
+ *
+ */
- DPRINTK("SMU do_cmd %02x len=%d %02x => %d (%02x)\n",
- dev->cmd_buf->cmd, dev->cmd_buf->length,
- dev->cmd_buf->data[0], rc, cmd_ack);
+int smu_queue_cmd(struct smu_cmd *cmd)
+{
+ unsigned long flags;
- return rc;
+ if (smu == NULL)
+ return -ENODEV;
+ if (cmd->data_len > SMU_MAX_DATA ||
+ cmd->reply_len > SMU_MAX_DATA)
+ return -EINVAL;
+
+ cmd->status = 1;
+ spin_lock_irqsave(&smu->lock, flags);
+ list_add_tail(&cmd->link, &smu->cmd_list);
+ if (smu->cmd_cur == NULL)
+ smu_start_cmd();
+ spin_unlock_irqrestore(&smu->lock, flags);
+
+ return 0;
}
+EXPORT_SYMBOL(smu_queue_cmd);
-/* RTC low level commands */
-static inline int bcd2hex (int n)
+
+int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+ unsigned int data_len,
+ void (*done)(struct smu_cmd *cmd, void *misc),
+ void *misc, ...)
{
- return (((n & 0xf0) >> 4) * 10) + (n & 0xf);
+ struct smu_cmd *cmd = &scmd->cmd;
+ va_list list;
+ int i;
+
+ if (data_len > sizeof(scmd->buffer))
+ return -EINVAL;
+
+ memset(scmd, 0, sizeof(*scmd));
+ cmd->cmd = command;
+ cmd->data_len = data_len;
+ cmd->data_buf = scmd->buffer;
+ cmd->reply_len = sizeof(scmd->buffer);
+ cmd->reply_buf = scmd->buffer;
+ cmd->done = done;
+ cmd->misc = misc;
+
+ va_start(list, misc);
+ for (i = 0; i < data_len; ++i)
+ scmd->buffer[i] = (u8)va_arg(list, int);
+ va_end(list);
+
+ return smu_queue_cmd(cmd);
}
+EXPORT_SYMBOL(smu_queue_simple);
-static inline int hex2bcd (int n)
+
+void smu_poll(void)
{
- return ((n / 10) << 4) + (n % 10);
+ u8 gpio;
+
+ if (smu == NULL)
+ return;
+
+ gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell);
+ if ((gpio & 7) == 7)
+ smu_db_intr(smu->db_irq, smu, NULL);
}
+EXPORT_SYMBOL(smu_poll);
+
-#if 0
-static inline void smu_fill_set_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+void smu_done_complete(struct smu_cmd *cmd, void *misc)
{
- cmd_buf->cmd = 0x8e;
- cmd_buf->length = 8;
- cmd_buf->data[0] = 0x00;
- memset(cmd_buf->data + 1, 0, 7);
+ struct completion *comp = misc;
+
+ complete(comp);
}
+EXPORT_SYMBOL(smu_done_complete);
+
-static inline void smu_fill_get_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+void smu_spinwait_cmd(struct smu_cmd *cmd)
{
- cmd_buf->cmd = 0x8e;
- cmd_buf->length = 1;
- cmd_buf->data[0] = 0x01;
+ while(cmd->status == 1)
+ smu_poll();
+}
+EXPORT_SYMBOL(smu_spinwait_cmd);
+
+
+/* RTC low level commands */
+static inline int bcd2hex (int n)
+{
+ return (((n & 0xf0) >> 4) * 10) + (n & 0xf);
}
-static inline void smu_fill_dis_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf)
+
+static inline int hex2bcd (int n)
{
- cmd_buf->cmd = 0x8e;
- cmd_buf->length = 1;
- cmd_buf->data[0] = 0x02;
+ return ((n / 10) << 4) + (n % 10);
}
-#endif
+
static inline void smu_fill_set_rtc_cmd(struct smu_cmd_buf *cmd_buf,
struct rtc_time *time)
cmd_buf->data[7] = hex2bcd(time->tm_year - 100);
}
-static inline void smu_fill_get_rtc_cmd(struct smu_cmd_buf *cmd_buf)
-{
- cmd_buf->cmd = 0x8e;
- cmd_buf->length = 1;
- cmd_buf->data[0] = 0x81;
-}
-static void smu_parse_get_rtc_reply(struct smu_cmd_buf *cmd_buf,
- struct rtc_time *time)
+int smu_get_rtc_time(struct rtc_time *time, int spinwait)
{
- time->tm_sec = bcd2hex(cmd_buf->data[0]);
- time->tm_min = bcd2hex(cmd_buf->data[1]);
- time->tm_hour = bcd2hex(cmd_buf->data[2]);
- time->tm_wday = bcd2hex(cmd_buf->data[3]);
- time->tm_mday = bcd2hex(cmd_buf->data[4]);
- time->tm_mon = bcd2hex(cmd_buf->data[5]) - 1;
- time->tm_year = bcd2hex(cmd_buf->data[6]) + 100;
-}
-
-int smu_get_rtc_time(struct rtc_time *time)
-{
- unsigned long flags;
+ struct smu_simple_cmd cmd;
int rc;
if (smu == NULL)
return -ENODEV;
memset(time, 0, sizeof(struct rtc_time));
- spin_lock_irqsave(&smu->lock, flags);
- smu_fill_get_rtc_cmd(smu->cmd_buf);
- rc = smu_do_cmd(smu);
- if (rc == 0)
- smu_parse_get_rtc_reply(smu->cmd_buf, time);
- spin_unlock_irqrestore(&smu->lock, flags);
+ rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 1, NULL, NULL,
+ SMU_CMD_RTC_GET_DATETIME);
+ if (rc)
+ return rc;
+ smu_spinwait_simple(&cmd);
- return rc;
+ time->tm_sec = bcd2hex(cmd.buffer[0]);
+ time->tm_min = bcd2hex(cmd.buffer[1]);
+ time->tm_hour = bcd2hex(cmd.buffer[2]);
+ time->tm_wday = bcd2hex(cmd.buffer[3]);
+ time->tm_mday = bcd2hex(cmd.buffer[4]);
+ time->tm_mon = bcd2hex(cmd.buffer[5]) - 1;
+ time->tm_year = bcd2hex(cmd.buffer[6]) + 100;
+
+ return 0;
}
-int smu_set_rtc_time(struct rtc_time *time)
+
+int smu_set_rtc_time(struct rtc_time *time, int spinwait)
{
- unsigned long flags;
+ struct smu_simple_cmd cmd;
int rc;
if (smu == NULL)
return -ENODEV;
- spin_lock_irqsave(&smu->lock, flags);
- smu_fill_set_rtc_cmd(smu->cmd_buf, time);
- rc = smu_do_cmd(smu);
- spin_unlock_irqrestore(&smu->lock, flags);
+ rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 8, NULL, NULL,
+ SMU_CMD_RTC_SET_DATETIME,
+ hex2bcd(time->tm_sec),
+ hex2bcd(time->tm_min),
+ hex2bcd(time->tm_hour),
+ time->tm_wday,
+ hex2bcd(time->tm_mday),
+ hex2bcd(time->tm_mon) + 1,
+ hex2bcd(time->tm_year - 100));
+ if (rc)
+ return rc;
+ smu_spinwait_simple(&cmd);
- return rc;
+ return 0;
}
+
void smu_shutdown(void)
{
- const unsigned char *command = "SHUTDOWN";
- unsigned long flags;
+ struct smu_simple_cmd cmd;
if (smu == NULL)
return;
- spin_lock_irqsave(&smu->lock, flags);
- smu->cmd_buf->cmd = 0xaa;
- smu->cmd_buf->length = strlen(command);
- strcpy(smu->cmd_buf->data, command);
- smu_do_cmd(smu);
+ if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 9, NULL, NULL,
+ 'S', 'H', 'U', 'T', 'D', 'O', 'W', 'N', 0))
+ return;
+ smu_spinwait_simple(&cmd);
for (;;)
;
- spin_unlock_irqrestore(&smu->lock, flags);
}
+
void smu_restart(void)
{
- const unsigned char *command = "RESTART";
- unsigned long flags;
+ struct smu_simple_cmd cmd;
if (smu == NULL)
return;
- spin_lock_irqsave(&smu->lock, flags);
- smu->cmd_buf->cmd = 0xaa;
- smu->cmd_buf->length = strlen(command);
- strcpy(smu->cmd_buf->data, command);
- smu_do_cmd(smu);
+ if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, NULL, NULL,
+ 'R', 'E', 'S', 'T', 'A', 'R', 'T', 0))
+ return;
+ smu_spinwait_simple(&cmd);
for (;;)
;
- spin_unlock_irqrestore(&smu->lock, flags);
}
+
int smu_present(void)
{
return smu != NULL;
}
+EXPORT_SYMBOL(smu_present);
int smu_init (void)
if (np == NULL)
return -ENODEV;
+ printk(KERN_INFO "SMU driver %s %s\n", VERSION, AUTHOR);
+
if (smu_cmdbuf_abs == 0) {
printk(KERN_ERR "SMU: Command buffer not allocated !\n");
return -EINVAL;
memset(smu, 0, sizeof(*smu));
spin_lock_init(&smu->lock);
+ INIT_LIST_HEAD(&smu->cmd_list);
+ INIT_LIST_HEAD(&smu->cmd_i2c_list);
smu->of_node = np;
+ smu->db_irq = NO_IRQ;
+ smu->msg_irq = NO_IRQ;
+ init_timer(&smu->i2c_timer);
+
/* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a
* 32 bits value safely
*/
goto fail;
}
data = (u32 *)get_property(np, "reg", NULL);
- of_node_put(np);
if (data == NULL) {
+ of_node_put(np);
printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
goto fail;
}
* and ack. GPIOs are at 0x50, best would be to find that out
* in the device-tree though.
*/
- smu->db_req = 0x50 + *data;
- smu->db_ack = 0x50 + *data;
+ smu->doorbell = *data;
+ if (smu->doorbell < 0x50)
+ smu->doorbell += 0x50;
+ if (np->n_intrs > 0)
+ smu->db_irq = np->intrs[0].line;
+
+ of_node_put(np);
+
+ /* Now look for the smu-interrupt GPIO */
+ do {
+ np = of_find_node_by_name(NULL, "smu-interrupt");
+ if (np == NULL)
+ break;
+ data = (u32 *)get_property(np, "reg", NULL);
+ if (data == NULL) {
+ of_node_put(np);
+ break;
+ }
+ smu->msg = *data;
+ if (smu->msg < 0x50)
+ smu->msg += 0x50;
+ if (np->n_intrs > 0)
+ smu->msg_irq = np->intrs[0].line;
+ of_node_put(np);
+ } while(0);
/* Doorbell buffer is currently hard-coded, I didn't find a proper
* device-tree entry giving the address. Best would probably to use
return -ENXIO;
}
+
+
+static int smu_late_init(void)
+{
+ if (!smu)
+ return 0;
+
+ /*
+ * Try to request the interrupts
+ */
+
+ if (smu->db_irq != NO_IRQ) {
+ if (request_irq(smu->db_irq, smu_db_intr,
+ SA_SHIRQ, "SMU doorbell", smu) < 0) {
+ printk(KERN_WARNING "SMU: can't "
+ "request interrupt %d\n",
+ smu->db_irq);
+ smu->db_irq = NO_IRQ;
+ }
+ }
+
+ if (smu->msg_irq != NO_IRQ) {
+ if (request_irq(smu->msg_irq, smu_msg_intr,
+ SA_SHIRQ, "SMU message", smu) < 0) {
+ printk(KERN_WARNING "SMU: can't "
+ "request interrupt %d\n",
+ smu->msg_irq);
+ smu->msg_irq = NO_IRQ;
+ }
+ }
+
+ return 0;
+}
+arch_initcall(smu_late_init);
+
+/*
+ * sysfs visibility
+ */
+
+static void smu_expose_childs(void *unused)
+{
+ struct device_node *np;
+
+ for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
+ if (device_is_compatible(np, "smu-i2c")) {
+ char name[32];
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+
+ if (reg == NULL)
+ continue;
+ sprintf(name, "smu-i2c-%02x", *reg);
+ of_platform_device_create(np, name, &smu->of_dev->dev);
+ }
+ }
+
+}
+
+static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
+
+static int smu_platform_probe(struct of_device* dev,
+ const struct of_device_id *match)
+{
+ if (!smu)
+ return -ENODEV;
+ smu->of_dev = dev;
+
+ /*
+ * Ok, we are matched, now expose all i2c busses. We have to defer
+ * that unfortunately or it would deadlock inside the device model
+ */
+ schedule_work(&smu_expose_childs_work);
+
+ return 0;
+}
+
+static struct of_device_id smu_platform_match[] =
+{
+ {
+ .type = "smu",
+ },
+ {},
+};
+
+static struct of_platform_driver smu_of_platform_driver =
+{
+ .name = "smu",
+ .match_table = smu_platform_match,
+ .probe = smu_platform_probe,
+};
+
+static int __init smu_init_sysfs(void)
+{
+ int rc;
+
+ /*
+ * Due to sysfs bogosity, a sysdev is not a real device, so
+ * we should in fact create both if we want sysdev semantics
+ * for power management.
+ * For now, we don't power manage machines with an SMU chip,
+ * I'm a bit too far from figuring out how that works with those
+ * new chipsets, but that will come back and bite us
+ */
+ rc = of_register_driver(&smu_of_platform_driver);
+ return 0;
+}
+
+device_initcall(smu_init_sysfs);
+
+struct of_device *smu_get_ofdev(void)
+{
+ if (!smu)
+ return NULL;
+ return smu->of_dev;
+}
+
+EXPORT_SYMBOL_GPL(smu_get_ofdev);
+
+/*
+ * i2c interface
+ */
+
+static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail)
+{
+ void (*done)(struct smu_i2c_cmd *cmd, void *misc) = cmd->done;
+ void *misc = cmd->misc;
+ unsigned long flags;
+
+ /* Check for read case */
+ if (!fail && cmd->read) {
+ if (cmd->pdata[0] < 1)
+ fail = 1;
+ else
+ memcpy(cmd->info.data, &cmd->pdata[1],
+ cmd->info.datalen);
+ }
+
+ DPRINTK("SMU: completing, success: %d\n", !fail);
+
+ /* Update status and mark no pending i2c command with lock
+ * held so nobody comes in while we dequeue an eventual
+ * pending next i2c command
+ */
+ spin_lock_irqsave(&smu->lock, flags);
+ smu->cmd_i2c_cur = NULL;
+ wmb();
+ cmd->status = fail ? -EIO : 0;
+
+ /* Is there another i2c command waiting ? */
+ if (!list_empty(&smu->cmd_i2c_list)) {
+ struct smu_i2c_cmd *newcmd;
+
+ /* Fetch it, new current, remove from list */
+ newcmd = list_entry(smu->cmd_i2c_list.next,
+ struct smu_i2c_cmd, link);
+ smu->cmd_i2c_cur = newcmd;
+ list_del(&cmd->link);
+
+ /* Queue with low level smu */
+ list_add_tail(&cmd->scmd.link, &smu->cmd_list);
+ if (smu->cmd_cur == NULL)
+ smu_start_cmd();
+ }
+ spin_unlock_irqrestore(&smu->lock, flags);
+
+ /* Call command completion handler if any */
+ if (done)
+ done(cmd, misc);
+
+}
+
+
+static void smu_i2c_retry(unsigned long data)
+{
+ struct smu_i2c_cmd *cmd = (struct smu_i2c_cmd *)data;
+
+ DPRINTK("SMU: i2c failure, requeuing...\n");
+
+ /* requeue command simply by resetting reply_len */
+ cmd->pdata[0] = 0xff;
+ cmd->scmd.reply_len = 0x10;
+ smu_queue_cmd(&cmd->scmd);
+}
+
+
+static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc)
+{
+ struct smu_i2c_cmd *cmd = misc;
+ int fail = 0;
+
+ DPRINTK("SMU: i2c compl. stage=%d status=%x pdata[0]=%x rlen: %x\n",
+ cmd->stage, scmd->status, cmd->pdata[0], scmd->reply_len);
+
+ /* Check for possible status */
+ if (scmd->status < 0)
+ fail = 1;
+ else if (cmd->read) {
+ if (cmd->stage == 0)
+ fail = cmd->pdata[0] != 0;
+ else
+ fail = cmd->pdata[0] >= 0x80;
+ } else {
+ fail = cmd->pdata[0] != 0;
+ }
+
+ /* Handle failures by requeuing command, after 5ms interval
+ */
+ if (fail && --cmd->retries > 0) {
+ DPRINTK("SMU: i2c failure, starting timer...\n");
+ smu->i2c_timer.function = smu_i2c_retry;
+ smu->i2c_timer.data = (unsigned long)cmd;
+ smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5);
+ add_timer(&smu->i2c_timer);
+ return;
+ }
+
+ /* If failure or stage 1, command is complete */
+ if (fail || cmd->stage != 0) {
+ smu_i2c_complete_command(cmd, fail);
+ return;
+ }
+
+ DPRINTK("SMU: going to stage 1\n");
+
+ /* Ok, initial command complete, now poll status */
+ scmd->reply_buf = cmd->pdata;
+ scmd->reply_len = 0x10;
+ scmd->data_buf = cmd->pdata;
+ scmd->data_len = 1;
+ cmd->pdata[0] = 0;
+ cmd->stage = 1;
+ cmd->retries = 20;
+ smu_queue_cmd(scmd);
+}
+
+
+int smu_queue_i2c(struct smu_i2c_cmd *cmd)
+{
+ unsigned long flags;
+
+ if (smu == NULL)
+ return -ENODEV;
+
+ /* Fill most fields of scmd */
+ cmd->scmd.cmd = SMU_CMD_I2C_COMMAND;
+ cmd->scmd.done = smu_i2c_low_completion;
+ cmd->scmd.misc = cmd;
+ cmd->scmd.reply_buf = cmd->pdata;
+ cmd->scmd.reply_len = 0x10;
+ cmd->scmd.data_buf = (u8 *)(char *)&cmd->info;
+ cmd->scmd.status = 1;
+ cmd->stage = 0;
+ cmd->pdata[0] = 0xff;
+ cmd->retries = 20;
+ cmd->status = 1;
+
+ /* Check transfer type, sanitize some "info" fields
+ * based on transfer type and do more checking
+ */
+ cmd->info.caddr = cmd->info.devaddr;
+ cmd->read = cmd->info.devaddr & 0x01;
+ switch(cmd->info.type) {
+ case SMU_I2C_TRANSFER_SIMPLE:
+ memset(&cmd->info.sublen, 0, 4);
+ break;
+ case SMU_I2C_TRANSFER_COMBINED:
+ cmd->info.devaddr &= 0xfe;
+ case SMU_I2C_TRANSFER_STDSUB:
+ if (cmd->info.sublen > 3)
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Finish setting up command based on transfer direction
+ */
+ if (cmd->read) {
+ if (cmd->info.datalen > SMU_I2C_READ_MAX)
+ return -EINVAL;
+ memset(cmd->info.data, 0xff, cmd->info.datalen);
+ cmd->scmd.data_len = 9;
+ } else {
+ if (cmd->info.datalen > SMU_I2C_WRITE_MAX)
+ return -EINVAL;
+ cmd->scmd.data_len = 9 + cmd->info.datalen;
+ }
+
+ DPRINTK("SMU: i2c enqueuing command\n");
+ DPRINTK("SMU: %s, len=%d bus=%x addr=%x sub0=%x type=%x\n",
+ cmd->read ? "read" : "write", cmd->info.datalen,
+ cmd->info.bus, cmd->info.caddr,
+ cmd->info.subaddr[0], cmd->info.type);
+
+
+ /* Enqueue command in i2c list, and if empty, enqueue also in
+ * main command list
+ */
+ spin_lock_irqsave(&smu->lock, flags);
+ if (smu->cmd_i2c_cur == NULL) {
+ smu->cmd_i2c_cur = cmd;
+ list_add_tail(&cmd->scmd.link, &smu->cmd_list);
+ if (smu->cmd_cur == NULL)
+ smu_start_cmd();
+ } else
+ list_add_tail(&cmd->link, &smu->cmd_i2c_list);
+ spin_unlock_irqrestore(&smu->lock, flags);
+
+ return 0;
+}
+
+
+
+/*
+ * Userland driver interface
+ */
+
+
+static LIST_HEAD(smu_clist);
+static DEFINE_SPINLOCK(smu_clist_lock);
+
+enum smu_file_mode {
+ smu_file_commands,
+ smu_file_events,
+ smu_file_closing
+};
+
+struct smu_private
+{
+ struct list_head list;
+ enum smu_file_mode mode;
+ int busy;
+ struct smu_cmd cmd;
+ spinlock_t lock;
+ wait_queue_head_t wait;
+ u8 buffer[SMU_MAX_DATA];
+};
+
+
+static int smu_open(struct inode *inode, struct file *file)
+{
+ struct smu_private *pp;
+ unsigned long flags;
+
+ pp = kmalloc(sizeof(struct smu_private), GFP_KERNEL);
+ if (pp == 0)
+ return -ENOMEM;
+ memset(pp, 0, sizeof(struct smu_private));
+ spin_lock_init(&pp->lock);
+ pp->mode = smu_file_commands;
+ init_waitqueue_head(&pp->wait);
+
+ spin_lock_irqsave(&smu_clist_lock, flags);
+ list_add(&pp->list, &smu_clist);
+ spin_unlock_irqrestore(&smu_clist_lock, flags);
+ file->private_data = pp;
+
+ return 0;
+}
+
+
+static void smu_user_cmd_done(struct smu_cmd *cmd, void *misc)
+{
+ struct smu_private *pp = misc;
+
+ wake_up_all(&pp->wait);
+}
+
+
+static ssize_t smu_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct smu_private *pp = file->private_data;
+ unsigned long flags;
+ struct smu_user_cmd_hdr hdr;
+ int rc = 0;
+
+ if (pp->busy)
+ return -EBUSY;
+ else if (copy_from_user(&hdr, buf, sizeof(hdr)))
+ return -EFAULT;
+ else if (hdr.cmdtype == SMU_CMDTYPE_WANTS_EVENTS) {
+ pp->mode = smu_file_events;
+ return 0;
+ } else if (hdr.cmdtype != SMU_CMDTYPE_SMU)
+ return -EINVAL;
+ else if (pp->mode != smu_file_commands)
+ return -EBADFD;
+ else if (hdr.data_len > SMU_MAX_DATA)
+ return -EINVAL;
+
+ spin_lock_irqsave(&pp->lock, flags);
+ if (pp->busy) {
+ spin_unlock_irqrestore(&pp->lock, flags);
+ return -EBUSY;
+ }
+ pp->busy = 1;
+ pp->cmd.status = 1;
+ spin_unlock_irqrestore(&pp->lock, flags);
+
+ if (copy_from_user(pp->buffer, buf + sizeof(hdr), hdr.data_len)) {
+ pp->busy = 0;
+ return -EFAULT;
+ }
+
+ pp->cmd.cmd = hdr.cmd;
+ pp->cmd.data_len = hdr.data_len;
+ pp->cmd.reply_len = SMU_MAX_DATA;
+ pp->cmd.data_buf = pp->buffer;
+ pp->cmd.reply_buf = pp->buffer;
+ pp->cmd.done = smu_user_cmd_done;
+ pp->cmd.misc = pp;
+ rc = smu_queue_cmd(&pp->cmd);
+ if (rc < 0)
+ return rc;
+ return count;
+}
+
+
+static ssize_t smu_read_command(struct file *file, struct smu_private *pp,
+ char __user *buf, size_t count)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ struct smu_user_reply_hdr hdr;
+ unsigned long flags;
+ int size, rc = 0;
+
+ if (!pp->busy)
+ return 0;
+ if (count < sizeof(struct smu_user_reply_hdr))
+ return -EOVERFLOW;
+ spin_lock_irqsave(&pp->lock, flags);
+ if (pp->cmd.status == 1) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ add_wait_queue(&pp->wait, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ rc = 0;
+ if (pp->cmd.status != 1)
+ break;
+ rc = -ERESTARTSYS;
+ if (signal_pending(current))
+ break;
+ spin_unlock_irqrestore(&pp->lock, flags);
+ schedule();
+ spin_lock_irqsave(&pp->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&pp->wait, &wait);
+ }
+ spin_unlock_irqrestore(&pp->lock, flags);
+ if (rc)
+ return rc;
+ if (pp->cmd.status != 0)
+ pp->cmd.reply_len = 0;
+ size = sizeof(hdr) + pp->cmd.reply_len;
+ if (count < size)
+ size = count;
+ rc = size;
+ hdr.status = pp->cmd.status;
+ hdr.reply_len = pp->cmd.reply_len;
+ if (copy_to_user(buf, &hdr, sizeof(hdr)))
+ return -EFAULT;
+ size -= sizeof(hdr);
+ if (size && copy_to_user(buf + sizeof(hdr), pp->buffer, size))
+ return -EFAULT;
+ pp->busy = 0;
+
+ return rc;
+}
+
+
+static ssize_t smu_read_events(struct file *file, struct smu_private *pp,
+ char __user *buf, size_t count)
+{
+ /* Not implemented */
+ msleep_interruptible(1000);
+ return 0;
+}
+
+
+static ssize_t smu_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct smu_private *pp = file->private_data;
+
+ if (pp->mode == smu_file_commands)
+ return smu_read_command(file, pp, buf, count);
+ if (pp->mode == smu_file_events)
+ return smu_read_events(file, pp, buf, count);
+
+ return -EBADFD;
+}
+
+static unsigned int smu_fpoll(struct file *file, poll_table *wait)
+{
+ struct smu_private *pp = file->private_data;
+ unsigned int mask = 0;
+ unsigned long flags;
+
+ if (pp == 0)
+ return 0;
+
+ if (pp->mode == smu_file_commands) {
+ poll_wait(file, &pp->wait, wait);
+
+ spin_lock_irqsave(&pp->lock, flags);
+ if (pp->busy && pp->cmd.status != 1)
+ mask |= POLLIN;
+ spin_unlock_irqrestore(&pp->lock, flags);
+ } if (pp->mode == smu_file_events) {
+ /* Not yet implemented */
+ }
+ return mask;
+}
+
+static int smu_release(struct inode *inode, struct file *file)
+{
+ struct smu_private *pp = file->private_data;
+ unsigned long flags;
+ unsigned int busy;
+
+ if (pp == 0)
+ return 0;
+
+ file->private_data = NULL;
+
+ /* Mark file as closing to avoid races with new request */
+ spin_lock_irqsave(&pp->lock, flags);
+ pp->mode = smu_file_closing;
+ busy = pp->busy;
+
+ /* Wait for any pending request to complete */
+ if (busy && pp->cmd.status == 1) {
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&pp->wait, &wait);
+ for (;;) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (pp->cmd.status != 1)
+ break;
+ spin_lock_irqsave(&pp->lock, flags);
+ schedule();
+ spin_unlock_irqrestore(&pp->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&pp->wait, &wait);
+ }
+ spin_unlock_irqrestore(&pp->lock, flags);
+
+ spin_lock_irqsave(&smu_clist_lock, flags);
+ list_del(&pp->list);
+ spin_unlock_irqrestore(&smu_clist_lock, flags);
+ kfree(pp);
+
+ return 0;
+}
+
+
+static struct file_operations smu_device_fops __pmacdata = {
+ .llseek = no_llseek,
+ .read = smu_read,
+ .write = smu_write,
+ .poll = smu_fpoll,
+ .open = smu_open,
+ .release = smu_release,
+};
+
+static struct miscdevice pmu_device __pmacdata = {
+ MISC_DYNAMIC_MINOR, "smu", &smu_device_fops
+};
+
+static int smu_device_init(void)
+{
+ if (!smu)
+ return -ENODEV;
+ if (misc_register(&pmu_device) < 0)
+ printk(KERN_ERR "via-pmu: cannot register misc device.\n");
+ return 0;
+}
+device_initcall(smu_device_init);
+#ifndef _SMU_H
+#define _SMU_H
+
/*
* Definitions for talking to the SMU chip in newer G5 PowerMacs
*/
#include <linux/config.h>
+#include <linux/list.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * I do not know what those are for at this point
+ */
+#define SMU_CMD_PARTITION_COMMAND 0x3e
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands, first byte is the
+ * "sub" command.
+ */
+#define SMU_CMD_FAN_COMMAND 0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND 0x6f
+#define SMU_CMD_GET_BATTERY_INFO 0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND 0x8e
+#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */
+#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */
+#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02
+#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */
+#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */
+#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */
+#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */
+#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */
+#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */
+#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */
+#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */
+#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */
+
+ /*
+ * i2c commands
+ *
+ * To issue an i2c command, first is to send a parameter block to the
+ * the SMU. This is a command of type 0x9a with 9 bytes of header
+ * eventually followed by data for a write:
+ *
+ * 0: bus number (from device-tree usually, SMU has lots of busses !)
+ * 1: transfer type/format (see below)
+ * 2: device address. For combined and combined4 type transfers, this
+ * is the "write" version of the address (bit 0x01 cleared)
+ * 3: subaddress length (0..3)
+ * 4: subaddress byte 0 (or only byte for subaddress length 1)
+ * 5: subaddress byte 1
+ * 6: subaddress byte 2
+ * 7: combined address (device address for combined mode data phase)
+ * 8: data length
+ *
+ * The transfer types are the same good old Apple ones it seems,
+ * that is:
+ * - 0x00: Simple transfer
+ * - 0x01: Subaddress transfer (addr write + data tx, no restart)
+ * - 0x02: Combined transfer (addr write + restart + data tx)
+ *
+ * This is then followed by actual data for a write.
+ *
+ * At this point, the OF driver seems to have a limitation on transfer
+ * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+ * wether this is just an OF limit due to some temporary buffer size
+ * or if this is an SMU imposed limit. This driver has the same limitation
+ * for now as I use a 0x10 bytes temporary buffer as well
+ *
+ * Once that is completed, a response is expected from the SMU. This is
+ * obtained via a command of type 0x9a with a length of 1 byte containing
+ * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+ * though I can't tell yet if this is actually necessary. Once this command
+ * is complete, at this point, all I can tell is what OF does. OF tests
+ * byte 0 of the reply:
+ * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+ * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+ * - on write, < 0 -> failure (immediate exit)
+ * - else, OF just exists (without error, weird)
+ *
+ * So on read, there is this wait-for-busy thing when getting a 0xfc or
+ * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+ * doing the above again until either the retries expire or the result
+ * is no longer 0xfe or 0xfc
+ *
+ * The Darwin I2C driver is less subtle though. On any non-success status
+ * from the response command, it waits 5ms and tries again up to 20 times,
+ * it doesn't differenciate between fatal errors or "busy" status.
+ *
+ * This driver provides an asynchronous paramblock based i2c command
+ * interface to be used either directly by low level code or by a higher
+ * level driver interfacing to the linux i2c layer. The current
+ * implementation of this relies on working timers & timer interrupts
+ * though, so be careful of calling context for now. This may be "fixed"
+ * in the future by adding a polling facility.
+ */
+#define SMU_CMD_I2C_COMMAND 0x9a
+ /* transfer types */
+#define SMU_I2C_TRANSFER_SIMPLE 0x00
+#define SMU_I2C_TRANSFER_STDSUB 0x01
+#define SMU_I2C_TRANSFER_COMBINED 0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data lenght is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ * reply at data offset 6, 7 and 8.
+ * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ * used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases.
+ *
+ */
+#define SMU_CMD_POWER_COMMAND 0xaa
+#define SMU_CMD_POWER_RESTART "RESTART"
+#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN"
+#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW"
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_df_COMMAND 0xdf
+#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */
+#define SMU_CMD_MISC_df_NMI_OPTION 0x04
+
+/*
+ * Version info commands
+ *
+ * I haven't quite tried to figure out how these work
+ */
+#define SMU_CMD_VERSION_COMMAND 0xea
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_ee_COMMAND 0xee
+#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
+#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
+#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */
+
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+ /* public */
+ u8 cmd; /* command */
+ int data_len; /* data len */
+ int reply_len; /* reply len */
+ void *data_buf; /* data buffer */
+ void *reply_buf; /* reply buffer */
+ int status; /* command status */
+ void (*done)(struct smu_cmd *cmd, void *misc);
+ void *misc;
+
+ /* private */
+ struct list_head link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+ struct smu_cmd cmd;
+ u8 buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+ unsigned int data_len,
+ void (*done)(struct smu_cmd *cmd, void *misc),
+ void *misc,
+ ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
/*
- * Basic routines for use by architecture. To be extended as
- * we understand more of the chip
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+ smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
*/
extern int smu_init(void);
extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
extern void smu_shutdown(void);
extern void smu_restart(void);
-extern int smu_get_rtc_time(struct rtc_time *time);
-extern int smu_set_rtc_time(struct rtc_time *time);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
/*
* SMU command buffer absolute address, exported by pmac_setup,
* this is allocated very early during boot.
*/
extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+ u8 bus; /* SMU bus ID (from device tree) */
+ u8 type; /* i2c transfer type */
+ u8 devaddr; /* device address (includes direction) */
+ u8 sublen; /* subaddress length */
+ u8 subaddr[3]; /* subaddress */
+ u8 caddr; /* combined address, filled by SMU driver */
+ u8 datalen; /* length of transfer */
+ u8 data[7]; /* data */
+};
+
+#define SMU_I2C_READ_MAX 0x0d
+#define SMU_I2C_WRITE_MAX 0x05
+
+struct smu_i2c_cmd
+{
+ /* public */
+ struct smu_i2c_param info;
+ void (*done)(struct smu_i2c_cmd *cmd, void *misc);
+ void *misc;
+ int status; /* 1 = pending, 0 = ok, <0 = fail */
+
+ /* private */
+ struct smu_cmd scmd;
+ int read;
+ int stage;
+ int retries;
+ u8 pdata[0x10];
+ struct list_head link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ * - sending SMU commands (default at open() time)
+ * - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+ __u32 cmdtype;
+#define SMU_CMDTYPE_SMU 0 /* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
+
+ __u8 cmd; /* SMU command byte */
+ __u32 data_len; /* Lenght of data following */
+};
+
+struct smu_user_reply_hdr
+{
+ __u32 status; /* Command status */
+ __u32 reply_len; /* Lenght of data follwing */
+};
+
+#endif /* _SMU_H */
projects / linux-2.6-omap-h63xx.git / commitdiff