ARM: OMAP: Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG

Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG.
This is needed for multi-omap in the future.

Cc: David Brownell <david-b@pacbell.net>
Cc: linux-pcmcia@lists.infradead.org
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Tony Lindren <tony@atomide.com>

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index a66505f58b1591f21e25634ac16ee26bf27e043d..82ec34c43bc56c60acf51efdb4e254f30f37f522 100644 (file)
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -267,13 +267,17 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
+       u32 l;
+
        if ((gpio_request(0, "smc_irq")) < 0) {
                printk("Error requesting gpio 0 for smc91x irq\n");
                return;
        }
 
        /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
-       EMIFS_CCS(1) |= 0x3;
+       l = omap_readl(EMIFS_CCS(1));
+       l |= 0x3;
+       omap_writel(l, EMIFS_CCS(1));
 }
 
 static void __init osk_init_cf(void)
@@ -526,13 +530,16 @@ static void __init osk_mistral_init(void) { }
 
 static void __init osk_init(void)
 {
+       u32 l;
+
        /* Workaround for wrong CS3 (NOR flash) timing
         * There are some U-Boot versions out there which configure
         * wrong CS3 memory timings. This mainly leads to CRC
         * or similar errors if you use NOR flash (e.g. with JFFS2)
         */
-       if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
-               EMIFS_CCS(3) = EMIFS_CS3_VAL;
+       l = omap_readl(EMIFS_CCS(3));
+       if (l != EMIFS_CS3_VAL)
+               omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
 
        osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
        osk_flash_resource.end += SZ_32M - 1;

diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index c12d8056bebd123c792978f62749dd1a3eb4356d..68eec6c6c517f665c8dcbc22aa983624766a7d2a 100644 (file)
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -60,13 +60,22 @@ struct omapflash_info {
 static void omap_set_vpp(struct map_info *map, int enable)
 {
        static int      count;
-
-       if (enable) {
-               if (count++ == 0)
-                       OMAP_EMIFS_CONFIG_REG |= OMAP_EMIFS_CONFIG_WP;
-       } else {
-               if (count && (--count == 0))
-                       OMAP_EMIFS_CONFIG_REG &= ~OMAP_EMIFS_CONFIG_WP;
+       u32 l;
+
+       if (cpu_class_is_omap1()) {
+               if (enable) {
+                       if (count++ == 0) {
+                               l = omap_readl(EMIFS_CONFIG);
+                               l |= OMAP_EMIFS_CONFIG_WP;
+                               omap_writel(l, EMIFS_CONFIG);
+                       }
+               } else {
+                       if (count && (--count == 0)) {
+                               l = omap_readl(EMIFS_CONFIG);
+                               l &= ~OMAP_EMIFS_CONFIG_WP;
+                               omap_writel(l, EMIFS_CONFIG);
+                       }
+               }
        }
 }
 

diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 46314b420765e6dffc63d3a5f4ce31241e3bccf6..569b746b573139a82e5f38045683d51c0e08c9e7 100644 (file)
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -38,19 +38,19 @@
 #define        CF_BASE 0xfffe2800
 
 /* status; read after IRQ */
-#define CF_STATUS_REG          __REG16(CF_BASE + 0x00)
+#define CF_STATUS                      (CF_BASE + 0x00)
 #      define  CF_STATUS_BAD_READ      (1 << 2)
 #      define  CF_STATUS_BAD_WRITE     (1 << 1)
 #      define  CF_STATUS_CARD_DETECT   (1 << 0)
 
 /* which chipselect (CS0..CS3) is used for CF (active low) */
-#define CF_CFG_REG             __REG16(CF_BASE + 0x02)
+#define CF_CFG                         (CF_BASE + 0x02)
 
 /* card reset */
-#define CF_CONTROL_REG         __REG16(CF_BASE + 0x04)
+#define CF_CONTROL                     (CF_BASE + 0x04)
 #      define  CF_CONTROL_RESET        (1 << 0)
 
-#define omap_cf_present() (!(CF_STATUS_REG & CF_STATUS_CARD_DETECT))
+#define omap_cf_present() (!(omap_readw(CF_STATUS) & CF_STATUS_CARD_DETECT))
 
 /*--------------------------------------------------------------------------*/
 
@@ -139,11 +139,11 @@ omap_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
                return -EINVAL;
        }
 
-       control = CF_CONTROL_REG;
+       control = omap_readw(CF_CONTROL);
        if (s->flags & SS_RESET)
-               CF_CONTROL_REG = CF_CONTROL_RESET;
+               omap_writew(CF_CONTROL_RESET, CF_CONTROL);
        else
-               CF_CONTROL_REG = 0;
+               omap_writew(0, CF_CONTROL);
 
        pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
                driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
@@ -270,7 +270,7 @@ static int __init omap_cf_probe(struct platform_device *pdev)
        omap_cfg_reg(V10_1610_CF_IREQ);
        omap_cfg_reg(W10_1610_CF_RESET);
 
-       CF_CFG_REG = ~(1 << seg);
+       omap_writew(~(1 << seg), CF_CFG);
 
        pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq);
 
@@ -279,14 +279,15 @@ static int __init omap_cf_probe(struct platform_device *pdev)
         * CF/PCMCIA variants...
         */
        pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name,
-                       seg, EMIFS_CCS(seg), EMIFS_ACS(seg));
-       EMIFS_CCS(seg) = 0x0004a1b3;    /* synch mode 4 etc */
-       EMIFS_ACS(seg) = 0x00000000;    /* OE hold/setup */
+               seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+       omap_writel(0x0004a1b3, EMIFS_CCS(seg));        /* synch mode 4 etc */
+       omap_writel(0x00000000, EMIFS_ACS(seg));        /* OE hold/setup */
 
        /* CF uses armxor_ck, which is "always" available */
 
        pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name,
-               CF_STATUS_REG, CF_CFG_REG, CF_CONTROL_REG,
+               omap_readw(CF_STATUS), omap_readw(CF_CFG),
+               omap_readw(CF_CONTROL),
                omap_cf_present() ? "present" : "(not present)");
 
        cf->socket.owner = THIS_MODULE;

diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h
index 8ded218cbea5ff7d5fcc12f4bdc4c37d91f57035..65a9c82d3bf75d7e0296da38f9369b869af3e704 100644 (file)
--- a/include/asm-arm/arch-omap/tc.h
+++ b/include/asm-arm/arch-omap/tc.h
@@ -75,16 +75,14 @@
 #ifndef        __ASSEMBLER__
 
 /* EMIF Slow Interface Configuration Register */
-#define        OMAP_EMIFS_CONFIG_REG   __REG32(EMIFS_CONFIG)
-
 #define OMAP_EMIFS_CONFIG_FR           (1 << 4)
 #define OMAP_EMIFS_CONFIG_PDE          (1 << 3)
 #define OMAP_EMIFS_CONFIG_PWD_EN       (1 << 2)
 #define OMAP_EMIFS_CONFIG_BM           (1 << 1)
 #define OMAP_EMIFS_CONFIG_WP           (1 << 0)
 
-#define EMIFS_CCS(n)           __REG32(EMIFS_CS0_CONFIG + (4 * (n)))
-#define EMIFS_ACS(n)           __REG32(EMIFS_ACS0 + (4 * (n)))
+#define EMIFS_CCS(n)           (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)           (EMIFS_ACS0 + (4 * (n)))
 
 /* Almost all documentation for chip and board memory maps assumes
  * BM is clear.  Most devel boards have a switch to control booting
@@ -93,13 +91,13 @@
  */
 static inline u32 omap_cs0_phys(void)
 {
-       return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+       return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
                        ?  OMAP_CS3_PHYS : 0;
 }
 
 static inline u32 omap_cs3_phys(void)
 {
-       return (OMAP_EMIFS_CONFIG_REG & OMAP_EMIFS_CONFIG_BM)
+       return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
                        ? 0 : OMAP_CS3_PHYS;
 }