--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (c) 2007 Texas Instruments
+ *
+ * Modified from mach-omap2/board-2430sdp-flash.c
+ * Author: Rohit Choraria <rohitkc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpmc.h>
+
+static struct mtd_partition sdp_nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "Bootloader-NOR",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "Params-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "Kernel-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "Filesystem-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data sdp_nor_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = sdp_nor_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+};
+
+static struct resource sdp_nor_resource = {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp_nor_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp_nor_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp_nor_resource,
+};
+
+static int sdp_onenand_setup(void __iomem *);
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+ {
+ .name = "X-Loader-OneNAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot Environment-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * (64 * 2048),
+ },
+ {
+ .name = "File System-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data sdp_onenand_data = {
+ .parts = sdp_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+ .onenand_setup = sdp_onenand_setup,
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device sdp_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &sdp_onenand_data,
+ },
+};
+
+/*
+ * sdp_onenand_setup - The function configures the onenand flash.
+ * @onenand_base: Onenand base address
+ *
+ * @return int: Currently always returning zero.
+ */
+static int sdp_onenand_setup(void __iomem *onenand_base)
+{
+ /* Onenand setup does nothing at present */
+ return 0;
+}
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void __init sdp3430_flash_init(void)
+{
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+
+ /* Configure start address and size of NOR device */
+ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
+ sdp_nor_resource.start = FLASH_BASE_SDPV2;
+ sdp_nor_resource.end = FLASH_BASE_SDPV2
+ + FLASH_SIZE_SDPV2 - 1;
+ } else {
+ sdp_nor_resource.start = FLASH_BASE_SDPV1;
+ sdp_nor_resource.end = FLASH_BASE_SDPV1
+ + FLASH_SIZE_SDPV1 - 1;
+ }
+
+ if (platform_device_register(&sdp_nor_device) < 0)
+ printk(KERN_ERR "Unable to register NOR device\n");
+
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+
+ /*
+ * xloader/Uboot would have programmed the oneNAND
+ * base address for us This is a ugly hack. The proper
+ * way of doing this is to pass the setup of u-boot up
+ * to kernel using kernel params - something on the
+ * lines of machineID. Check if oneNAND is configured
+ */
+ if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+ onenandcs = cs;
+ cs++;
+ }
+ if (onenandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "OneNAND: Unable to find configuration "
+ " in GPMC\n ");
+ return;
+ }
+
+ if (onenandcs < GPMC_CS_NUM) {
+ sdp_onenand_data.cs = onenandcs;
+ if (platform_device_register(&sdp_onenand_device) < 0)
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ }
+}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/workqueue.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <asm/arch/twl4030.h>
#include <asm/arch/mcspi.h>
#include <asm/io.h>
#include <asm/delay.h>
-#define SDP3430_FLASH_CS 0
#define SDP3430_SMC91X_CS 3
#define ENABLE_VAUX3_DEDICATED 0x03
#define ENABLE_VAUX3_DEV_GRP 0x20
-static struct mtd_partition sdp3430_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct flash_platform_data sdp3430_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
- .parts = sdp3430_partitions,
- .nr_parts = ARRAY_SIZE(sdp3430_partitions),
-};
-
-static struct resource sdp3430_flash_resource = {
- .start = FLASH_BASE,
- .end = FLASH_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device sdp3430_flash_device = {
- .name = "omapflash",
- .id = 0,
- .dev = {
- .platform_data = &sdp3430_flash_data,
- },
- .num_resources = 1,
- .resource = &sdp3430_flash_resource,
-};
static struct resource sdp3430_smc91x_resources[] = {
[0] = {
.start = OMAP34XX_ETHR_START,
.end = OMAP34XX_ETHR_START + SZ_4K,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM,
},
[1] = {
- .start = OMAP_GPIO_IRQ(OMAP34XX_ETHR_GPIO_IRQ),
+ .start = 0,
.end = 0,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ,
},
};
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_smc91x_device,
- &sdp3430_flash_device,
&sdp3430_kp_device,
&sdp3430_lcd_device,
};
{
int eth_cs;
unsigned long cs_mem_base;
+ int eth_gpio = 0;
- eth_cs = SDP3430_SMC91X_CS;
+ eth_cs = SDP3430_SMC91X_CS;
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
sdp3430_smc91x_resources[0].end = cs_mem_base + 0xf;
udelay(100);
- if (omap_request_gpio(OMAP34XX_ETHR_GPIO_IRQ) < 0) {
+ if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
+ eth_gpio = OMAP34XX_ETHR_GPIO_IRQ_SDPV2;
+ else
+ eth_gpio = OMAP34XX_ETHR_GPIO_IRQ_SDPV1;
+
+ sdp3430_smc91x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (omap_request_gpio(eth_gpio) < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- OMAP34XX_ETHR_GPIO_IRQ);
+ eth_gpio);
return;
}
- omap_set_gpio_direction(OMAP34XX_ETHR_GPIO_IRQ, 1);
+ omap_set_gpio_direction(eth_gpio, 1);
}
static void __init omap_3430sdp_init_irq(void)
return 0;
}
+extern void __init sdp3430_flash_init(void);
+
static void __init omap_3430sdp_init(void)
{
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
spi_register_board_info(sdp3430_spi_board_info,
ARRAY_SIZE(sdp3430_spi_board_info));
ads7846_dev_init();
+ sdp3430_flash_init();
omap_serial_init();
sdp3430_usb_init();
}
/* Placeholder for 3430SDP specific defines */
#define OMAP34XX_ETHR_START DEBUG_BASE
-#define OMAP34XX_ETHR_GPIO_IRQ 29
+#define OMAP34XX_ETHR_GPIO_IRQ_SDPV1 29
+#define OMAP34XX_ETHR_GPIO_IRQ_SDPV2 6
/*
* GPIO used for TSC2046, TI's Touchscreen controller
*/
#ifdef CONFIG_OMAP3430_ES2
-#define TS_GPIO 2
+#define TS_GPIO 2
#else
-#define TS_GPIO 3
+#define TS_GPIO 3
#endif
/* NAND */
/* IMPORTANT NOTE ON MAPPING
- * 3430SDP - 343X
+ * 3430SDP - 34XX
* ----------
- * NOR always on 0x04000000
+ * NOR always on 0x04000000 for SDPV1
+ * NOR always on 0x10000000 for SDPV2
* MPDB always on 0x08000000
* NAND always on 0x0C000000
* OneNand Mapped to 0x20000000
* Boot Mode(NAND/NOR). The other on CS1
*/
-#define FLASH_BASE 0x04000000 /* NOR flash (64 Meg aligned) */
-#define DEBUG_BASE 0x08000000 /* debug board */
-#define NAND_BASE 0x0C000000 /* NAND flash */
-#define ONENAND_MAP 0x20000000 /* OneNand flash */
+#define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (64 Meg aligned) */
+#define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (256 Meg aligned) */
+#define DEBUG_BASE 0x08000000 /* debug board */
+#define NAND_BASE 0x0C000000 /* NAND flash */
+#define ONENAND_MAP 0x20000000 /* OneNand flash */
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1 SZ_64M
+#define FLASH_SIZE_SDPV2 SZ_128M
#ifdef CONFIG_TWL4030_CORE
projects / linux-2.6-omap-h63xx.git / commitdiff