]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (4606): Add driver for TUA6100
authorAndrew de Quincey <adq_dvb@lidskialf.net>
Tue, 5 Sep 2006 20:53:06 +0000 (17:53 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Tue, 26 Sep 2006 15:30:35 +0000 (12:30 -0300)
This driver was originally in budget-av.c, however I have extracted it into
a seperate file to permit reuse.
I also reworked the code to make it maintainable. I then examined the KNC1
windows drivers and rewrote the code in order to configure the PLL as they
do. This solves a lot of reported tuning problems.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/frontends/Kconfig
drivers/media/dvb/frontends/Makefile
drivers/media/dvb/frontends/tua6100.c [new file with mode: 0644]
drivers/media/dvb/frontends/tua6100.h [new file with mode: 0644]

index 9e5ff0dbe2d411a9015061df26cc0059f82c8223..080fa257a0bc25aca04bd84e77c044dfe3f9043f 100644 (file)
@@ -296,4 +296,11 @@ config DVB_ISL6421
        help
          An SEC control chip.
 
+config DVB_TUA6100
+       tristate "TUA6100 PLL"
+       depends on DVB_CORE && I2C
+       default m if DVB_FE_CUSTOMISE
+       help
+         A DVBS PLL chip.
+
 endmenu
index 0b43942d8b54e5b8f38b071de2a4542e60f50f7f..dce9cf0c75c0880acc234ad7a58d5441b3b6286c 100644 (file)
@@ -36,3 +36,4 @@ obj-$(CONFIG_DVB_ISL6421) += isl6421.o
 obj-$(CONFIG_DVB_TDA10086) += tda10086.o
 obj-$(CONFIG_DVB_TDA826X) += tda826x.o
 obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
+obj-$(CONFIG_DVB_TUA6100) += tua6100.o
diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb/frontends/tua6100.c
new file mode 100644 (file)
index 0000000..8855439
--- /dev/null
@@ -0,0 +1,205 @@
+/**
+ * Driver for Infineon tua6100 pll.
+ *
+ * (c) 2006 Andrew de Quincey
+ *
+ * Based on code found in budget-av.c, which has the following:
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ *                               Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *                       & Marcus Metzler for convergence integrated media GmbH
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <asm/types.h>
+
+#include "tua6100.h"
+
+struct tua6100_priv {
+       /* i2c details */
+       int i2c_address;
+       struct i2c_adapter *i2c;
+       u32 frequency;
+};
+
+static int tua6100_release(struct dvb_frontend *fe)
+{
+       if (fe->tuner_priv)
+               kfree(fe->tuner_priv);
+       fe->tuner_priv = NULL;
+       return 0;
+}
+
+static int tua6100_sleep(struct dvb_frontend *fe)
+{
+       struct tua6100_priv *priv = fe->tuner_priv;
+       int ret;
+       u8 reg0[] = { 0x00, 0x00 };
+       struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
+               printk("%s: i2c error\n", __FUNCTION__);
+       }
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 0);
+
+       return (ret == 1) ? 0 : ret;
+}
+
+static int tua6100_set_params(struct dvb_frontend *fe,
+                             struct dvb_frontend_parameters *params)
+{
+       struct tua6100_priv *priv = fe->tuner_priv;
+       u32 div;
+       u32 prediv;
+       u8 reg0[] = { 0x00, 0x00 };
+       u8 reg1[] = { 0x01, 0x00, 0x00, 0x00 };
+       u8 reg2[] = { 0x02, 0x00, 0x00 };
+       struct i2c_msg msg0 = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
+       struct i2c_msg msg1 = { .addr = priv->i2c_address, .flags = 0, .buf = reg1, .len = 4 };
+       struct i2c_msg msg2 = { .addr = priv->i2c_address, .flags = 0, .buf = reg2, .len = 3 };
+
+#define _R 4
+#define _P 32
+#define _ri 4000000
+
+       // setup register 0
+       if (params->frequency < 2000000) {
+               reg0[1] = 0x03;
+       } else {
+               reg0[1] = 0x07;
+       }
+
+       // setup register 1
+       if (params->frequency < 1630000) {
+               reg1[1] = 0x2c;
+       } else {
+               reg1[1] = 0x0c;
+       }
+       if (_P == 64)
+               reg1[1] |= 0x40;
+       if (params->frequency >= 1525000)
+               reg1[1] |= 0x80;
+
+       // register 2
+       reg2[1] = (_R >> 8) & 0x03;
+       reg2[2] = _R;
+       if (params->frequency < 1455000) {
+               reg2[1] |= 0x1c;
+       } else if (params->frequency < 1630000) {
+               reg2[1] |= 0x0c;
+       } else {
+               reg2[1] |= 0x1c;
+       }
+
+       // The N divisor ratio (note: params->frequency is in kHz, but we need it in Hz)
+       prediv = (params->frequency * _R) / (_ri / 1000);
+       div = prediv / _P;
+       reg1[1] |= (div >> 9) & 0x03;
+       reg1[2] = div >> 1;
+       reg1[3] = (div << 7);
+       priv->frequency = ((div * _P) * (_ri / 1000)) / _R;
+
+       // Finally, calculate and store the value for A
+       reg1[3] |= (prediv - (div*_P)) & 0x7f;
+
+#undef _R
+#undef _P
+#undef _ri
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if (i2c_transfer(priv->i2c, &msg0, 1) != 1)
+               return -EIO;
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if (i2c_transfer(priv->i2c, &msg2, 1) != 1)
+               return -EIO;
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       if (i2c_transfer(priv->i2c, &msg1, 1) != 1)
+               return -EIO;
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 0);
+
+       return 0;
+}
+
+static int tua6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+       struct tua6100_priv *priv = fe->tuner_priv;
+       *frequency = priv->frequency;
+       return 0;
+}
+
+static struct dvb_tuner_ops tua6100_tuner_ops = {
+       .info = {
+               .name = "Infineon TUA6100",
+               .frequency_min = 950000,
+               .frequency_max = 2150000,
+               .frequency_step = 1000,
+       },
+       .release = tua6100_release,
+       .sleep = tua6100_sleep,
+       .set_params = tua6100_set_params,
+       .get_frequency = tua6100_get_frequency,
+};
+
+struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
+{
+       struct tua6100_priv *priv = NULL;
+       u8 b1 [] = { 0x80 };
+       u8 b2 [] = { 0x00 };
+       struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = b1, .len = 1 },
+                                 { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } };
+       int ret;
+
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1);
+       ret = i2c_transfer (i2c, msg, 2);
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 0);
+
+       if (ret != 2)
+               return NULL;
+
+       priv = kzalloc(sizeof(struct tua6100_priv), GFP_KERNEL);
+       if (priv == NULL)
+               return NULL;
+
+       priv->i2c_address = addr;
+       priv->i2c = i2c;
+
+       memcpy(&fe->ops.tuner_ops, &tua6100_tuner_ops, sizeof(struct dvb_tuner_ops));
+       fe->tuner_priv = priv;
+       return fe;
+}
+EXPORT_SYMBOL(tua6100_attach);
+
+MODULE_DESCRIPTION("DVB tua6100 driver");
+MODULE_AUTHOR("Andrew de Quincey");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h
new file mode 100644 (file)
index 0000000..2e5d8fb
--- /dev/null
@@ -0,0 +1,47 @@
+/**
+ * Driver for Infineon tua6100 PLL.
+ *
+ * (c) 2006 Andrew de Quincey
+ *
+ * Based on code found in budget-av.c, which has the following:
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ *                               Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph  Metzler
+ *                       & Marcus Metzler for convergence integrated media GmbH
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __DVB_TUA6100_H__
+#define __DVB_TUA6100_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+/**
+ * Attach a tua6100 pll to the supplied frontend structure.
+ *
+ * @param fe Frontend to attach to.
+ * @param addr i2c address of the pll.
+ * @param i2c i2c adapter to use.
+ * @return FE pointer on success, NULL on failure.
+ */
+extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
+
+#endif