help
Clock code for the S3C2410, and similar processors
+config S3C2410_PM
+ bool
+ depends on CONFIG_PM
+ help
+ Power Management code common to S3C2410 and better
+
config CPU_S3C2410_DMA
bool
depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
+ select S3C2410_PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
bool
depends on ARCH_S3C2410
select S3C2410_CLOCK
+ select S3C2410_PM
select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
bool
depends on ARCH_S3C2420
select S3C2410_CLOCK
+ select S3C2410_PM
select CPU_S3C244X
help
Support for S3C2442 Samsung Mobile CPU based systems.
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o
+
+obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o
obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o
# Power Management support
extern void printascii(const char *);
-static void pm_dbg(const char *fmt, ...)
+void pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
}
}
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
/* s3c2410_pm_enter
static int s3c2410_pm_enter(suspend_state_t state)
{
unsigned long regs_save[16];
- unsigned long tmp;
/* ensure the debug is initialised (if enabled) */
DBG("s3c2410_pm_enter(%d)\n", state);
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+ return -EINVAL;
+ }
+
if (state != PM_SUSPEND_MEM) {
printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
return -EINVAL;
DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
- /* ensure at least GESTATUS3 has the resume address */
-
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
/* save all necessary core registers not covered by the drivers */
s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ /* call cpu specific preperation */
+
+ pm_cpu_prep();
+
/* flush cache back to ram */
flush_cache_all();
if (s3c2410_cpu_save(regs_save) == 0) {
flush_cache_all();
- s3c2410_cpu_suspend();
+ pm_cpu_sleep();
}
/* restore the cpu state */
cpu_init();
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
extern unsigned long s3c_irqwake_intallow;
extern unsigned long s3c_irqwake_eintallow;
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
/* Flags for PM Control */
extern unsigned long s3c_pm_flags;
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+extern void pm_dbg(const char *fmt, ...);
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#endif
+
+static void s3c2410_pm_prepare(void)
+{
+ /* ensure at least GSTATUS3 has the resume address */
+
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
+
+ DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+}
+
+int s3c2410_pm_resume(struct sys_device *dev)
+{
+ unsigned long tmp;
+
+ /* unset the return-from-sleep flag, to ensure reset */
+
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
+
+ return 0;
+}
+
+static int s3c2410_pm_add(struct sys_device *dev)
+{
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2410_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2440_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+
+static struct sysdev_driver s3c2442_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
--- /dev/null
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+ /* s3c2410_cpu_suspend
+ *
+ * put the cpu into sleep mode
+ */
+
+ENTRY(s3c2410_cpu_suspend)
+ @@ prepare cpu to sleep
+
+ ldr r4, =S3C2410_REFRESH
+ ldr r5, =S3C24XX_MISCCR
+ ldr r6, =S3C2410_CLKCON
+ ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
+ ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
+ ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+
+ orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
+ orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+ orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
+
+ teq pc, #0 @ first as a trial-run to load cache
+ bl s3c2410_do_sleep
+ teq r0, r0 @ now do it for real
+ b s3c2410_do_sleep @
+
+ @@ align next bit of code to cache line
+ .align 8
+s3c2410_do_sleep:
+ streq r7, [ r4 ] @ SDRAM sleep command
+ streq r8, [ r5 ] @ SDRAM power-down config
+ streq r9, [ r6 ] @ CPU sleep
+1: beq 1b
+ mov pc, r14
mov r0, #0
ldmfd sp, { r4 - r12, pc }
- /* s3c2410_cpu_suspend
- *
- * put the cpu into sleep mode
- */
-
-ENTRY(s3c2410_cpu_suspend)
- @@ prepare cpu to sleep
-
- ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C24XX_MISCCR
- ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
-
- orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
- orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
- orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
-
- teq pc, #0 @ first as a trial-run to load cache
- bl s3c2410_do_sleep
- teq r0, r0 @ now do it for real
- b s3c2410_do_sleep @
-
- @@ align next bit of code to cache line
- .align 8
-s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
-1: beq 1b
- mov pc, r14
-
@@ return to the caller, after having the MMU
@@ turned on, this restores the last bits from the
@@ stack
projects / linux-2.6-omap-h63xx.git / commitdiff