]> pilppa.com Git - linux-2.6-omap-h63xx.git/commit
[S390] qdio: proper kill of qdio tasklets
authorJan Glauber <jang@linux.vnet.ibm.com>
Thu, 26 Mar 2009 14:24:26 +0000 (15:24 +0100)
committerMartin Schwidefsky <schwidefsky@de.ibm.com>
Thu, 26 Mar 2009 14:24:20 +0000 (15:24 +0100)
commitc38f96080955854e54df9cb392bc674e1ae330e1
tree8bfc4019e8c52aaf40c9e76ca0372915c76c3a27
parente4c14e2085cd32f61e9ffc47d5b20d4f5f7639f3
[S390] qdio: proper kill of qdio tasklets

The queue tasklets were stopped with tasklet_disable. Although tasklet_disable
prevents the tasklet from beeing executed it is still possible that a tasklet
is scheduled on a CPU at that point. A following qdio_establish calls
tasklet_init which clears the tasklet count and the tasklet state leading to
the following Oops:

    <2>kernel BUG at kernel/softirq.c:392!
    <4>illegal operation: 0001 [#1] SMP
    <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs
_acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm
od ext3 mbcache jbd
    <4>Supported: Yes
    <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1
    <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998)
    <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4)
    <4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
    <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe
    <4>           000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000
    <4>           00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30
    <4>           0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30
    <4>Krnl Code: 00000000001399e8b9200021            cgr     %r2,%r1
    <4>           00000000001399eca7740004            brc     7,1399f4
    <4>           00000000001399f0a7f40001            brc     15,1399f2
    <4>          >00000000001399f4c0100027e8ee        larl    %r1,636bd0
    <4>           00000000001399fabf1f1008            icm     %r1,15,8(%r1)
    <4>           00000000001399fea7840019            brc     8,139a30
    <4>           0000000000139a02c0300027e8ef        larl    %r3,636be0
    <4>           0000000000139a08e3c030000004        lg      %r12,0(%r3)
    <4>Call Trace:
    <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4)
    <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4
    <4> [<000000000010fa2e>] do_softirq+0x96/0xb0
    <4> [<000000000013a8d8>] irq_exit+0x70/0xcc
    <4> [<000000000010d1d8>] do_extint+0xf0/0x110
    <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a
    <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3]
    <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4)
    <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3]
    <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230
    <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194
    <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454
    <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4
    <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3]
    <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120
    <4> [<00000000001ccfc8>] vfs_write+0xac/0x184
    <4> [<00000000001cd218>] SyS_write+0x68/0xe0
    <4> [<0000000000113402>] sysc_noemu+0x10/0x16
    <4> [<0000020000043188>] 0x20000043188
    <4>Last Breaking-Event-Address:
    <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4
    <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP
    <4> <0>Kernel panic - not syncing: Fatal exception in interrupt

Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be
called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a
queue is going down and prevent further tasklet schedules in that case.

Remove superflous tasklet_schedule from input queue setup, at that time
the queues are not ready so the schedule results in a NOP.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
drivers/s390/cio/qdio_main.c
drivers/s390/cio/qdio_thinint.c